Search USGS⌕ Search

Geology topics

D. J. Lidke

Publications and source records attributed to D. J. Lidke.

At least 19 recordsLinked to original sources
USGS2012

Preliminary surficial geologic map of the Newberry Springs 30' x 60' quadrangle, California

The Newberry Springs 30' x 60' quadrangle is located in the central Mojave Desert of southern California. It is split approximately into northern and southern halves by I-40, with the city of Barstow at its western edge and the town of Ludlow near its eastern edge. The map area spans lat 34°30 to 35° N. to long -116 °to -117° W. and covers over 1,000 km 2 . We integrate the results of surficial geologic mapping conducted during 2002-2005 with compilations of previous surficial mapping and bedrock geologic mapping. Quaternary units are subdivided in detail on the map to distinguish variations in age, process of formation, pedogenesis, lithology, and spatial interdependency, whereas pre-Quaternary bedrock units are grouped into generalized assemblages that emphasize their attributes as hillslope-forming materials and sources of parent material for the Quaternary units. The spatial information in this publication is presented in two forms: a spatial database and a geologic map. The geologic map is a view (the display of an extracted subset of the database at a given time) of the spatial database; it highlights key aspects of the database and necessarily does not show all of the data contained therein. The database contains detailed information about Quaternary geologic unit composition, authorship, and notes regarding geologic units, faults, contacts, and local vegetation. The amount of information contained in the database is too large to show on a single map, so a restricted subset of the information was chosen to summarize the overall nature of the geology. Refer to the database for additional information. Accompanying the spatial data are the map documentation and spatial metadata. The map documentation (this document) describes the geologic setting and history of the Newberry Springs map sheet, summarizes the age and physical character of each map unit, and describes principal faults and folds. The Federal Geographic Data Committee (FGDC) compliant metadata provides detailed information about the digital files and file structure of the spatial data.

California↗
USGS2011

Cover sequences at the northern margin of the Antongil Craton, NE Madagascar

The island of Madagascar is a collage of Precambrian, generally high-grade metamorphic basement domains, that are locally overlain by unmetamorphosed sedimentary rocks and poorly understood low-grade metasediments. In the Antalaha area of NE Madagascar, two distinct cover sequences rest on high-grade metamorphic and igneous basement rocks of the Archaean Antongil craton and the Neoproterozoic Bemarivo belt. The older of these two cover sequences, the Andrarona Group, consists of low-grade metasedimentary rocks. The younger sequence, the newly defined Ampohafana Formation, consists of unmetamorphosed sedimentary rocks. The Andrarona Group rests on Neoarchaean granites and monzogranites of the Antongil craton and consists of a basal metagreywacke, thick quartzites and an upper sequence of sericite-chlorite meta-mudstones, meta-sandstones and a volcaniclastic meta-sandstone. The depositional age of the volcaniclastic meta-sandstone is constrained in age by U–Pb laser-ablation ICP-MS analyses of euhedral zircons to 1875 ± 8 Ma (2σ). Detrital zircons of Archaean and Palaeoproterozoic age represent an input from the Antongil craton and a newly defined Palaeoproterozoic igneous unit, the Masindray tonalite, which underlies the Andrarona Group, and yielded a U–Pb zircon age of 2355 ± 11 Ma (2σ), thus constraining the maximum age of deposition of the basal part of the Andrarona Group. The Andrarona Group shows a low-grade metamorphic overprint in the area near Antalaha; illite crystallinity values scatter around 0.17°Δ2Θ CuKα, which is within the epizone. The Ampohafana Formation consists of undeformed, polymict conglomerate, cross-bedded sandstone, and red mudstone. An illite crystallinity value of >0.25°Δ2Θ CuKα obtained from the rocks is typical of the diagenetic zone. Occurrences of rhyodacite pebbles in the Ampohafana Formation and the intrusion of a basaltic dyke suggest a deposition in a WSW-ENE-trending graben system during the opening of the Indian Ocean in the Upper Cretaceous, that was characterized by extensive rhyolitic to basaltic magmatism along Madagascar's eastern coast.

Antongil Craton↗
USGS2010

Geological evolution of the Antongil Craton, NE Madagascar

The Antongil Craton, along with the Masora and Antananarivo cratons, make up the fundamental Archaean building blocks of the island of Madagascar. They were juxtaposed during the late-Neoproterozoic to early Palaeozoic assembly of Gondwana. In this paper we give a synthesis of the geology of the Antongil Craton and present previously published and new geochemical and U-Pb zircon analyses to provide an event history for its evolution.The oldest rocks in the Antongil Craton form a nucleus of tonalitic gneiss, characteristic of Palaeo-Mesoarchaean cratons globally, including phases dated between 3320 ?? 14. Ma to 3231 ?? 6. Ma and 3187 ?? 2. Ma to 3154 ?? 5. Ma. A series of mafic dykes was intruded into the Mesoarchaean tonalites and a sedimentary succession was deposited on the craton prior to pervasive deformation and migmatisation of the region. The age of deposition of the metasediments has been constrained from a volcanic horizon to around 3178 ?? 2. Ma and subject to migmatisation at around 2597 ?? 49. Ma. A subsequent magmatic episode generated voluminous, weakly foliated granitic rocks, that also included additions from both reworked older crustal material and younger source components. An earlier granodiorite-dominated assemblage, dated between 2570 ?? 18. Ma and 2542 ?? 5. Ma, is largely exposed in xenoliths and more continuously in the northern part of the craton, while a later monzogranite-dominated phase, dated between 2531 ?? 13. Ma and 2513 ?? 0.4. Ma is more widely developed. Together these record the stabilisation of the craton, attested to by the intrusion of a younger dyke swarm, the age of which is constrained by a sample of metagabbro dated at 2147 ?? 6. Ma, providing the first evidence for Palaeoproterozoic rocks from the Antongil Craton.The youngest events recorded in the isotopic record of the Antongil Craton are reflected in metamorphism, neocrystallisation and Pb-loss at 792 ?? 130. Ma to 763 ?? 13. Ma and 553 ?? 68. Ma. These events are interpreted as being the only manifestation of the Pan-African orogeny seen in the craton, which led to the assembly of the tectonic blocks that comprise the island. ?? 2010 NERC.

Precambrian Research↗
USGS2007

Modeling the spatial distribution of landslide-prone colluvium and shallow groundwater on hillslopes of Seattle, WA

Landslides in partially saturated colluvium on Seattle, WA, hillslopes have resulted in property damage and human casualties. We developed statistical models of colluvium and shallow-groundwater distributions to aid landslide hazard assessments. The models were developed using a geographic information system, digital geologic maps, digital topography, subsurface exploration results, the groundwater flow modeling software VS2DI and regression analyses. Input to the colluvium model includes slope, distance to a hillslope-crest escarpment, and escarpment slope and height. We developed different statistical relations for thickness of colluvium on four landforms. Groundwater model input includes colluvium basal slope and distance from the Fraser aquifer. This distance was used to estimate hydraulic conductivity based on the assumption that addition of finer-grained material from down-section would result in lower conductivity. Colluvial groundwater is perched so we estimated its saturated thickness. We used VS2DI to establish relations between saturated thickness and the hydraulic conductivity and basal slope of the colluvium. We developed different statistical relations for three groundwater flow regimes. All model results were validated using observational data that were excluded from calibration. Eighty percent of colluvium thickness predictions were within 25% of observed values and 88% of saturated thickness predictions were within 20% of observed values. The models are based on conditions common to many areas, so our method can provide accurate results for similar regions; relations in our statistical models require calibration for new regions. Our results suggest that Seattle landslides occur in native deposits and colluvium, ultimately in response to surface-water erosion of hillstope toes. Regional groundwater conditions do not appear to strongly affect the general distribution of Seattle landslides; historical landslides were equally dispersed within and outside of the area potentially affected by regional groundwater conditions.

Earth Surface Processes and Landforms↗
USGS2003

Seasonal movement of the Slumgullion landslide determined from global positioning system surveys and field instrumentation, July 1998-March 2002

Measurements of landslide movement made by global positioning system surveys and extensometers over a 3.5-year period show that the Slumgullion landslide in the San Juan Mountains of southwest Colorado moved throughout the monitoring period, but that daily velocities varied on a seasonal basis. Landslide velocities peaked in the early spring and summer in response to snowmelt and summer thunderstorms, respectively. Velocities were slowest in mid-winter when air and soil temperatures were coldest and precipitation was generally low and/or in the form of snow with a low water content. We hypothesize that the seasonal variability in velocities is due to ground-water levels and corresponding pore pressures that decrease when surface water is unavailable or cannot infiltrate frozen landslide material, and increase when surface water from melting snow or rainfall infiltrates unfrozen landslide material. We also suggest that patches of bouldery debris and fractures (created by continuous movement of the landslide) are conduits through which surface water can infiltrate, regardless of the frozen or unfrozen state of the landslide matrix material. Therefore, the availability of surface water is more important than landslide temperature in controlling the rate of landslide movement. This hypothesis is supported by field instrumentation data that show (1) landslide velocities coinciding with precipitation amounts regardless of the depth of freezing of landslide material, (2) spring and annual landslide velocities that were greatest when the depth of freezing was also the greatest, and (3) a rapid (several weeks or less) velocity and pore pressure response to rainfall. The persistent, but seasonally variable movement of the landslide, fits the bathtub model for landslide movement described by Baum and Reid [Baum, R.L., Reid, M.E., 2000. Ground water isolation by low-permeability clays in landslide shear zones. In: Bromhead, E.N., Dixon, N., Ibsen, M.-L. (Eds.), Landslides in Research, Theory and Practice. Proc. 8th Int. Symp. on Landslides, Cardiff, Wales, vol. 1, 139-144]. In their model, the landslide is isolated both mechanically and hydrologically from adjacent materials by low permeability clays. These clays cause the landslide to retain water. Our data support this model by suggesting that pore pressures at the basal landslide surface are always adequate to maintain landslide movement and that any infiltration of water at the surface of the landslide is adequate to rapidly increase landslide velocity. ?? 2002 Elsevier Science B.V. All rights reserved.

Engineering Geology↗
USGS2002

Geologic map of the Eagle Quadrangle, Eagle County, Colorado

The Eagle quadrangle covers an area that straddles the Eagle River and Interstate 70 (I-70) and it includes the town of Eagle, Colo., which is located in the southwestern part of the quadrangle, just south of I-70 and the Eagle River, about 37 km west of Vail, Colo. The map area is part of the I-70 urban corridor, which is experiencing rapid and escalating urban growth. Geologic mapping along this corridor is needed for ongoing land-use planning. A variety of rocks and deposits characterize the map area and areas nearby. Sedimentary rocks present in the map area range in age from Pennsylvanian rocks, which were deposited in the ancestral Eagle basin during the formation of the ancestral Rocky Mountains, to Late Cretaceous rocks that were deposited just prior to the formation of the present Rocky Mountains. The Pennsylvanian rocks in the map area include a thick sequence of evaporitic rocks (Eagle Valley Evaporite). These evaporitic rocks are commonly complexly folded throughout the southern part of the quadrangle where they are exposed. In general, in the central and northern parts of the quadrangle, the sedimentary rocks overlying the evaporite dip gently to moderately northward. Consequently, the youngest sedimentary rocks (Late Cretaceous rocks) are exposed dipping gently to the north in the northern part of the quadrangle; landslide complexes are widespread along the northerly dipping, dip slopes in shaly rocks of the Cretaceous sequence in the northeastern part of the map area. During the Early Miocene, basaltic volcanism formed extensive basaltic flows that mantled the previously deformed and eroded sedimentary rocks. Erosional remnants of the basaltic flows are preserved in the southeastern, west-central, and north-central parts of the map area. Some of these basaltic flows are faulted and downdropped in a manner that suggests they were downdropped in areas where large volumes of the underlying evaporitic rocks were removed from the subsurface, beneath the basaltic rocks, by dissolution or flowage of the evaporite in the subsurface. Quaternary and late Tertiary(?) surficial deposits in the map area consist mainly of Quaternary alluvium and colluvium, late and middle Pleistocene terrace gravels of the Eagle River, Miocene(?) gravel remnants of the ancestral Eagle River and its tributaries, and Pleistocene to recent mass movement deposits that include landslides and debris flows. Potential geologic hazards in the map area include landslides, debris flows, rockfalls, local flooding, ground subsidence, and expansive and corrosive soils.

Colorado↗
USGS1993

Maps showing mineral resource assessment for porphyry and stockwork deposits of copper, molybdenum, and tungsten and for stockwork and disseminated deposits of gold and silver in the Butte 1° x 2° quadrangle, Montana

This report documents the assessment for potential occurrences of undiscovered porphyry and stockwork deposits of copper, molybdenum, and tungsten (porphyry Cu-Mo-W) and stockwork and disseminated deposits of gold and silver (disseminated Au-Ag) in the Butte 1 °X2° quadrangle. The Butte quadrangle, in west-central Montana, is one of the best known mineral producing regions in the U.S. Mining districts in the quadrangle, including the world famous Butte or Summit Valley district, have produced a variety of metallic and nonmetallic mineral commodities valued at more than $6.4 billion (at the time of production). Because of its importance as a mineral producing region, the Butte quadrangle was selected for study by the U.S. Geological Survey under the Conterminous United States Mineral Assessment Program (CUSMAP). Under this program, new data on geology, geochemistry, geophysics, geochronology, mineral resources, and remote sensing were collected and synthesized. The field and laboratory studies were supported, in part, by funding from the Geologic Framework and Synthesis Program and the Wilderness Program. The methods used in this resource assessment for porphyry Cu-Mo-W and disseminated Au-Ag deposits in the quadrangle include a compilation of all data, the development of descriptive occurrence models, and the analysis of data using techniques provided by a Geographic Information System (GIS). This map is one of several maps on the Butte 1 °X2° quadrangle. Other deposit types have been assessed for the Butte quadrangle, and maps (U.S. Geological Survey (USGS) Miscellaneous Investigation Series Maps) for each of the following have been prepared: Vein and replacement deposits of gold, silver, copper, lead, zinc, manganese, and tungsten (Elliott, Wallace, and others, 1992a) and skarn deposits of gold, silver, copper, tungsten, and iron (Elliott and others, 1992b ). Other publications resulting from this study include linear features map (Rowan and others, 1991 ); limonite and hydrothermal alteration map (Rowan and Segal, 1989); mineral occurrence maps (Elliott and others, 1986; Elliott, Loen, and others, 1992); and geologic maps (Wallace, 1987; Wallace and others, 1987).

Montana↗
USGS1990

Faults of the central part of the Lewis and Clark line and fragmentation of the Late Cretaceous foreland basin in west-central Montana

The Lewis and Clark line is a prominent zone of strike-slip, dip-slip, and oblique-slip faults that extends from near Wallace, Idaho, to east of Helena, Montana. Faults of this zone have been intermittently active from Middle Proterozoic to Holocene time, and because of numerous tectonic overprints, controversy continues about displacement directions and times of displacement along specific faults. Geologic mapping shows evidence that many principal faults of the Lewis and Clark line, such as the St. Marys-Helena Valley, Bald Butte, Ninemile, and Osburn faults, had right separation or slip that ranged between 28 and 11 km, and this displacement probably occurred during Late Cretaceous time. Other faults, such as the Elevation Mountain, Placer Creek, and Ranch Creek faults, have Late Cretaceous right separations that range between 8 and 3.2 km, and the Mount Sentinel fault zone has between 6.5 and 3 km of right separation of probable Late Cretaceous age. Subsidiary structures of the Lewis and Clark line postdate Paleozoic and Lower Cretaceous rocks and predate Late Cretaceous stocks at some places; subsidiary faults and folds that have age constraints have slip directions compatible with right slip along adjacent, principal faults. Sedimentation patterns of Lower and Upper Cretaceous rocks indicate that faults of the Lewis and Clark line fragmented the foredeep region of the foreland basin into separate northern and southern basins in Late Cretaceous time. The Lower and Upper Cretaceous Blackleaf Formation (Albian and lower Cenomanian) was deposited in a continuous foredeep basin that extended across the Lewis and Clark line from north of the Canadian border to southwestern Montana, a distance of about 450 km. North of the Lewis and Clark line, middle and upper Cenomanian rocks are absent, and a thin sequence of uppermost Cenomanian to Campanian rocks was deposited in a marine environment that changed to a strand-line and continental environment in early Campanian time. South of the Lewis and Clark line, middle and upper Cenomanian deposits are also absent, but a thick sequence of Turonian-to-Campanian rocks was deposited in brackish water and strand-line environments, and during later Campanian time, in a continental environment. In the region between the St. Marys-Helena Valley and Bald Butte faults, a barrier may have formed that served as a local sediment source between foredeep regions in the northern and southern foreland basin during the period 91 to 75 Ma. South of the Bald Butte fault, an extensional tectonic regime contributed to a higher sediment-accumulation rate in the foredeep region along the north border of the southern basin (30 cm/1,000 yr), as compared to lower sediment-accumulation rates (6.9 and 7.8 cm/ 1,000 yr) in the foredeep region of the south part of the northern basin.

Montana↗