Search USGS⌕ Search

Geology topics

D. C. Hedlund

Publications and source records attributed to D. C. Hedlund.

At least 19 recordsLinked to original sources

Geologic investigations in the Lake Valley area, Sierra County, New Mexico

At the request of the Bureau of Land Management, the U.S. Geological Survey evaluated the area of the historic Lake Valley mining district and townsite, Sierra County, New Mexico, for its potential for undiscovered mineral resources. The four chapters of this report describe the geology of the area, present the results of geophysical investigations carried out to aid in interpreting subsurface geology, describe the mining history and character of the region's ore deposits, and present geochemical data on potential for contamination from abandoned mine dumps in the mining district.

New Mexico↗

Geology and mineral resources of the Lake Valley area, Sierra County, New Mexico

At the request of the Bureau of Land Management, the U.S. Geological Survey assessed the Lake Valley Area of Critical Environmental Concern (ACEC), which includes the historic Lake Valley townsite and silver-manganese mining district, for undiscovered mineral resources. The Lake Valley ACEC is along the southeastern margin of the Black Range of western Sierra County, New Mexico. The Black Range contains eleven mining districts from which silver, lead, zinc, manganese, copper, gold, and tin have been recovered. As part of the study, an area of over 75 square mi (195 square km) in the area of the Lake Valley ACEC was mapped to understand ore controls and to assess mineral-resource potential. Lake Valley mining district is in Mississippian Lake Valley Formation carbonate rocks, but much of the surrounding terrane consists of volcanic rocks on the southeastern edge of the Emory cauldron which formed about 34.9 Ma. Volcanic rocks are part of the Mogollon-Datil volcanic province which include flows, breccias, ash-flow tuffs, and intrusive rhyolites. The Lake Valley mining district is located about 20 mi (32 km) south of the Late Cretaceous Laramide copper-gold porphyry intrusion at Hillsboro. It is also located at the western boundary of the Rio Grande rift basin.The Lake Valey fault is the major structural feature of the study area. Geological and geophysical data suggest the fault is composed of two segments: a southern, northwest-striking segment that may have a pre-Tertiary history and a northerly-striking segment that is part of the Emory cauldron ring fracture. The mining district is bounded by the southern, northwest-striking segment of the fault which may have up to 800 ft (240m) of normal offset. Deposit types identified in the Black Range, and for which we assess mineral potential, are Laramide porphyry, Laramide skarns, Laramide veins, gold placer, carbonate-hosted, volcanic-epithermal, and rhyolite tin; no Rio Grande Rift baritefluorite-galena deposits are known, but they are included in the assessment. The most likely deposits to be discovered in the Lake Valley district are carbonate-hosted silver-manganese deposits. These deposits could be deposited by hydrothermal fluids or be related to intrusion of Oligocene rhyolite or Laramide porphyry. An aeromagnetic high south of the district probably reflects a small felsic intrusion of unknown age. We assess the Lake Valley ACEC as having low to moderate potential for undiscovered carbonate-hosted deposits associated with volcanic rocks or Laramide porphyry plutons, and low potential for gold placer and rhyolite tin deposits.

New Mexico↗

The Conterminous United States Mineral Assessment Program: Background information to accompany folio of geologic and mineral resource maps of the Silver City 1° x 2° quadrangle, New Mexico and Arizona

The Silver City 1° x 2° quadrangle, consisting of about 20,650 km2 in southwestern New Mexico and southeastern Arizona, has been investigated by a multidisciplinary research team for the purpose of assessing its mineral resource potential. The results of this investigation are in a folio of 21 maps that contain detailed information on the geology, geochemistry, geophysics, mineral deposits, and potential mineral resources of the quadrangle. This Circular provides background information on the various studies and integrates the component maps. It contains an extensive selected bibliography pertinent to the geology and mineral deposits of the quadrangle. The quadrangle has produced more than $3.5 billion in mineral products since about 1850 and contains significant resources of gold, silver, copper, molybdenum, lead, zinc, iron, manganese-iron, zeolite minerals, and possibly tin and tungsten.

Arizona, New Mexico↗

Aeromagnetic map of the Sandia Mountain Wilderness, Bernalillo and Sandoval counties, New Mexico

During 1981 and 1982 the U.S. Geological Survey and the U.S. Bureau of Mimes conducted field investigations to evaluate the mineral resource potential of the Sandia Mountain Wilderness, Bernalillo and Sandoval Counties, New Mexico. This report and map represent only the results of the aeromagnetic compilation from previous publications (U.S. geological Survey, 1975a,b,c). The wilderness encompasses 61 mi 2 (37,232 acres) within the Cibola National Forest, but the map area is about 145 mi 2 and includes areas adjacent to the wilderness boundary. The Sandia Mountains are a part of an eastward-tilted fault block that is about 18 mi long and 8-10 mi wide and that is continuous with the Manzanita-Manzano Mountain fault blocks to the south of Tijeras Canyon (fig. 1). The westward-facing Sandia range front of Precambrian crystalline rocks is capped by about 2,500 ft of Pennsylvanian and Permian limestone, sandstone, and siltstone strata that dip 15°-20° eastward to form the dip slope of the tilted fault block. About 40-50 percent of the rocks exposed in the Sandia Mountains are of Precambrian age and include an older group of greenstone, metarhyolite, quartzite, and gneiss that is intruded by the Sandia Granite (1,445 m.y.). Paleozoic strata, about 2,500 ft thick, comprise about 30 percent of the outcrop area and form an extensive dip slope on the tilted fault block. Mesozoic strata commonly occupy synclinal basins such as that near Placitas in the Santo Domingo basin. Tertiary strata are represented by the early Tertiary Galisteo Formation and the poorly consolidated basin-f111 sediments of the Santa Fe Group. The dominant structural element is the east-tilted Sandia fault block, which is bounded on the west by the Pliocene and Miocene Sandia and Rincon-Ranchos range-front faults. These faults have as much as 20,000-28,000 ft of throw. Numerous north-trending faults along the dip slope are considered coeval with the range-front faults and have had an important influence on the localization of barite-fluorite veins. The northeast- and east-northeast-striking Placitas-San Francisco, Tijeras, and Gutierrez faults are principally of Laramide age but probably had numerous periods of movement. Regional gravity data (Suits and Cordell, 1981) indicate no significant mass distribution anomalies within the study area.

New Mexico↗

Lead-isotopic compositions of diverse igneous rocks and ore deposits from southwestern New Mexico and their implications for early Proterozoic crustal evolution in the western United States

U-Pb zircon measurements from some of the basement rocks in southwestern New Mexico have ages that range from 1,650 to 1,450 m.y. The largest ore deposits occur near Silver City in the southwest part of the region studied. They are associated with Laramide alkali to calc-alkaline plutons, and their lead-isotopic compositions are the least radiogenic in the region. This lead exhibits lower-crustal-upper-mantle characteristics, and for the major producing porphyry copper deposits, the 206 Pb/ 204 Pb ratios are less than 18.0. Lead from more silicic mid-Tertiary volcanic rocks and associated ore deposits has somewhat higher 208 Pb/ 204 Pb ratios that reflect a greater crustal involvement in their origin. In a regional trend to the northeast, ore lead becomes more radiogenic, and at Hansonburg, 200 km from Silver City, lead in the Mississippi-type deposits is clearly derived from upper-crustal sources. On the 207 Pb/ 204 Pb- 206 Pb/ 204 Pb plot, data from all of the rocks and ores that we have analyzed form an array that lies below the average orogene curve of Doe and Zartman (1979). A common source is implied for the lead, the isotopic composition of which was similar to that found in 1,750-m.y.-old stratiform deposits as far apart as Pecos, New Mexico, and Jerome, Arizona. Such a composition indicates that over a large region of the southwestern United States, continental crust developed between 1,750 and 1,450 m.y. ago, possibly in an island-arc environment. Basement rocks that are ∼ 1,750 m.y. old extend northward through Colorado to Utah. Galena data obtained in previous studies show that the fraction of older sialic lead in those rocks increases toward the Archean craton in Wyoming. The crust apparently developed southward from Wyoming in stages at 2,400 m.y. ago or before, 2,100 m.y. ago, and 1,750 m.y. ago, with incorporation of older sialic material in each stage as far south as Milford, Utah.

Geological Society of America Bulletin↗

Mineral resource potential map of the Buffalo Peaks Wilderness Study Area, Lake, Park, and Chaffee Counties, Colorado

Under the provisions of the Wilderness Act (Public Law 88-577, September 3, 1964) and the Joint Conference Report on Senate Bill 4, 88th Congress, the U.S. Geological Survey and the U.S. Bureau of Mines have been conducting mineral surveys of wilderness and primitive areas. Areas officially designated as "wilderness," "wild," or "canoe" when the act was passed were incorporated into the National Wilderness Preservation System, and some of them are presently being studied. The act provided that areas under consideration for wilderness designation should be studied for suitability for incorporation into the Wilderness System. The mineral surveys constitute one aspect of the suitability studies. The act directs that the results of such surveys are to be made available to the public and be submitted to the President and the Congress. This report discusses the results of a mineral survey of the Buffalo Peaks Wilderness Study Area, Pike and San Isabel National Forests, Lake, Park, and Chaffee Counties, Colo. The area was established as a wilderness study area by Public Law 96-560, December 22, 1980.

Miscellaneous Field Studies Map↗

Alkalic rocks and resources of thorium and associated elements in the Powderhorn District, Gunnison County, Colorado

Alkalic igneous rocks and related concentrations of thorium, niobium, rare-earth elements, titanium, and other elements have long been known in the Powderhorn mining district and have been explored intermittently for several decades. The deposits formed chiefly about 570 m.y. (million years) ago in latest Precambrian or Early Cambrian time. They were emplaced in lower Proterozoic (Proterozoic X) metasedimentary, metavolcanic, and plutonic rocks. The complex of alkalic rocks of Iron Hill occupies 31 km 2 (square kilometers) and is composed of pyroxenite, uncompahgrite, ijolite, nepheline syenite, and carbonatite, in order of generally decreasing age. Fenite occurs in a zone, in places more than 0.6 km (kilometer) wide, around a large part of the margin of the complex and adjacent to alkalic dikes intruding Precambrian host rock. The alkalic rocks have a radioactivity, chiefly due to thorium, greater than that of the surrounding Powderhorn Granite (Proterozoic X) and metamorphic rocks. The pyroxenite, uncompahgrite, ijolite, and nepheline syenite, which form more than 80 percent of the complex, have fairly uniform radioactivity. Radioactivity in the carbonatite stock, carbonatite dikes, and the carbonatite-pyroxenite mixed rock zone, however, generally exceeds that in the other rocks of the complex. The thorium concentrations in the Powderhorn district occur in six types of deposits: thorite veins, a large massive carbonatite body, carbonatite dikes, trachyte dikes, magnetite-ilmeniteperovskite dikes or segregations, and disseminations in small, anomalously radioactive plutons chiefly of granite or quartz syenite that are older than rocks of the alkalic complex. The highest grade thorium concentrations in the district are in veins that commonly occur in steeply dipping, crosscutting shear or breccia zones in the Precambrian rocks. They range in thickness from a centimeter or less to 5 m (meters) and are as much as 1 km long. The thorite veins are composed chiefly of potassic feldspar, white to smoky quartz, calcite, barite, goethite, and hematite, and also contain thorite, jasper, magnetite, pyrite, galena, chalcopyrite, sphalerite, synchysite, apatite, fluorite, biotite, sodic amphibole, rutile, monazite, bastnaesite, and vanadinite. The Th0 2 content of the thorite veins ranges from less than 0.01 percent to as much as 4.9 percent in high-grade samples. The Th0 2 content is generally less than 1 percent, however, and is only 0.05 to 0.1 percent in many of the veins examined in the district. Samples of the dolomitic carbonatite of Iron Hill mostly range from 3 to 145 ppm (parts per million) thorium. Thirty samples of the carbonatite dikes, the most radioactive rocks within the complex of Iron Hill, contain about 30 to 3,200 ppm thorium and a trace to about 1.5 percent rare-earth oxides. The magnetite-ilmenite-perovskite rocks have a radioactivity of 2 to 12 times the background of Precambrian granite that is attributable chiefly to thorium substitution for calcium in the perovskite. In two analyses the perovskite contains 0.12 and 0.15 percent Th0 2 . Trachyte dikes as much as 25 m thick cut the Precambrian rocks; their radioactivity is generally about two to four times the background of typical Precambrian granite, is locally higher, but is low relative to other types of thorium concentrations. A finegrained granite that is anomalously radioactive occurs in thick, dikelike plutons as much as 1.2 km wide, or more. The thorium content varies widely within the granite bodies. Eight samples of the granite contain 32 to 281 ppm thorium (averaging 115 ppm). The economic potential of thorium in the Powderhorn district is related in part to other elements such as niobium, titanium, iron, and rare earths. The proportions of niobium and rare earths to thorium vary in different parts of the district. Within the carbonatite body of Iron Hill, the Nb 2 0 5 content greatly exceeds Th0 2 , but the Th0 2 -Nb 2 0 5

Professional Paper↗