Geology topics

Congcong Li

Publications and source records attributed to Congcong Li.

9 recordsLinked to original sources

USGS2026

Aligning legacy NLCD land cover maps based on Landsat Collection 1 to Collection 2

The transition from Landsat Collection 1 to Collection 2 introduced significant improvements in radiometric and geometric accuracy. However, the improvements cause location misalignment between the existing Landsat-derived land cover products and the new collection. The legacy National Land Cover Database (NLCD) has been used as a cornerstone land cover source for a variety of research. Therefore, a method aligning the legacy NLCD product to Collection 2 is required to ensure its continuity and consistency of service. We developed a strategy to not only align legacy NLCD to match new Collection 2 geometric locations but also improve land cover labeling in the region that was affected by the geometric shifts. The method identifies boundary pixels of homogeneous land cover patches as potential problem areas that are likely impacted by geometric shifts and generates candidate labels from 3 × 3 window with the target pixel at the center and segmentation-derived majority label. Standard phenology patterns of each candidate land cover type are established based on the random samples except boundary pixels within a 1000-pixels × 1000-pixels processing window region. The phenological distance to each standard land cover type pattern is calculated through a penalty dynamic time warping (DTW) method for each target pixel in the boundary region. Finally, the method determines the most suitable label based on the phenological distance from the candidate labels. Both visual and accuracy assessment results demonstrate that the alignment preserves the overall land cover patterns in the original legacy NLCD product while reducing the spatial discrepancies between the Landsat Collection 2 and land cover. In addition, it enhances the accuracy of land cover labeling of boundary pixels. The overall accuracy (OA) was increased by 7% in the land cover boundary regions after alignment. The quality and confusion matrix comparison between the alignment results and the original legacy NLCD confirm the reliability of the method. Our alignment method has the potential to serve as a framework for aligning other Landsat-derived land cover products to future collections.

conterminous United States↗

USGS2024

A "Region-Specific Model Adaptation (RSMA)" based training data method in large-scale land cover mapping

An accurate and historical land cover monitoring dataset for Alaska could provide fundamental information for a range of studies, such as conservation habitats, biogeochemical cycles, and climate systems, in this distinctive region. This research addresses challenges associated with the extraction of training data for timely and accurate land cover classifications in Alaska over longer time periods (e.g., greater than 10 years). Specifically, we designed the “Region-Specific Model Adaptation (RSMA)” method for training data. The method integrates land cover information from the National Land Cover Database (NLCD), LANDFIRE’s Existing Vegetation Type (EVT), and the National Wetlands Inventory (NWI) and machine learning techniques to generate robust training samples based on the Anderson Level II classification legend. The assumption of the method is that spectral signatures vary across regions because of diverse land surface compositions; however, despite these variations, there are consistent, collective land cover characteristics that span the entire region. Building upon this assumption, this research utilized the classification power of deep learning algorithms and the generalization ability of RSMA to construct a model for the RSMA method. Additionally, we interpreted existing vegetation plot information for land cover labels as validation data to reduce inconsistency in the human interpretation. Our validation results indicate that the RSMA method improved the quality of the training data derived solely from the NLCD by approximately 30% for the overall accuracy. The validation assessment also demonstrates that the RSMA method can generate reliable training data on large scales in regions that lack sufficient reliable data.

Remote Sensing↗

USGS2023

National Land Cover Database 2019: A comprehensive strategy for creating the 1986-2019 forest disturbance product

The National Land Cover Database (NLCD) 2016 products show that, between 2001 and 2016, nearly half of the land cover change in the conterminous United States (CONUS) involved forested areas. To ensure the quality of NLCD land cover and land cover change products, it is important to accurately detect the location and time of forest disturbance. We designed a comprehensive strategy to integrate a continuous time series forest change detection method and a discrete 2-date forest change detection method to produce the NLCD 1986–2019 forest disturbance product, which shows the most recent forest disturbance date between the years 1986 and 2019 for every 2- to 3-year interval. This method, the Time-Series method Using Normalized Spectral Distance (NSD) index (TSUN), uses NSD to detect multi-date forest land cover changes and was shown to be easily extended to a new date even when new images were processed in a different way than previous date images. The discrete 2-date method uses the Multi-Index Integrated Change Analysis (MIICA) method to detect changes between 2-date images. A method based on confidence and object grouping was designed to combine the multiple MIICA outputs to improve change detection accuracy. Finally, an aggregation scheme was implemented to combine the TSUN output, the integrated MIICA results, and ancillary data to produce the NLCD 2019 forest disturbance 1986–2019 product. The initial accuracy assessments from 1,600 samples over 4 Landsat path/rows show that the producer’s and user’s accuracies of the 2001–2019 forest disturbance map are 76% and 74%, respectively. The final CONUS-wide forest disturbance product is provided at https://www.mrlc.gov/nlcd-2019-science-research-products .

conterminous United States↗

USGS2022

Tree regrowth duration map from LCMAP collection 1.0 land cover products in the conterminous United States, 1985–2017

Forest covers about one-third of the land area of the conterminous United States (CONUS) and plays an important role in offsetting carbon emissions and supporting local economies. Growing interest in forests as relatively cost-effective nature-based climate solutions, particularly restoration and reforestation activities, has increased the demand for information on forest regrowth and recovery following natural and anthropogenic disturbances (e.g., fire, harvest, or thinning). However, a wall-to-wall mapping of the CONUS tree regrowth duration at an annual time interval and 30-m resolution is still challenging. In this study, we utilized the annual land cover products to develop a dataset to quantify forest regrowth duration for CONUS over 1985–2017. The land cover data used to derive the tree regrowth duration map is from the primary land cover product in the U.S. Geological Survey’s Land Change Monitoring, Assessment, and Projection (LCMAP) collection. The LCMAP product used all available Landsat images to detect disturbances over forest and classify Grass/Shrub to Tree Cover transitions on an annual basis. The average regrowth duration was then calculated for each pixel. The regrowth duration map was validated using human interpreted annual reference data that were collected independently. The validation results show one-year of underestimation and 6-year standard deviation of error between the reference data and regrowth duration map. In southeastern CONUS, where major tree regrowth activities have been observed, our map showed higher accuracy with less than one-year bias and 3.6 years standard deviation of error. Forest in the southeast took around 5 years to recover, which was faster than other regions of CONUS. Many pixels had multiple disturbances during the 33-year study period in the region. The spatial pattern of the tree regrowth indicated intense harvesting activities in this region. The Pacific Northwest coast region was the second main area of tree regrowth, but this region often took multiple decades to recover. Given increasing interest in forests as nature-based climate solutions, the tree regrowth duration map can be used to assess reforestation activities as well as forest recovery following natural disturbance and harvesting.

Conterminous United States↗

USGS2022

Implementation of the CCDC algorithm to produce the LCMAP Collection 1.0 annual land surface change product

The increasing availability of high-quality remote sensing data and advanced technologies have spurred land cover mapping to characterize land change from local to global scales. However, most land change datasets either span multiple decades at a local scale or cover limited time over a larger geographic extent. Here, we present a new land cover and land surface change dataset created by the Land Change Monitoring, Assessment, and Projection (LCMAP) program over the conterminous United States (CONUS). The LCMAP land cover change dataset consists of annual land cover and land cover change products over the period 1985-2017 at 30-meter resolution using Landsat and other ancillary data via the Continuous Change Detection and Classification (CCDC) algorithm. In this paper, we describe our novel approach to implement the CCDC algorithm to produce the LCMAP product suite composed of five land cover and five land surface change related products. The LCMAP land cover products were validated using a collection of ~ 25,000 reference samples collected independently across CONUS. The overall agreement for all years of the LCMAP primary land cover product reached 82.5%. The LCMAP products are produced through the LCMAP Information Warehouse and Data Store (IW+DS) and Shared Mesos Cluster systems that can process, store, and deliver all datasets for public access. To our knowledge, this is the first set of published 30m annual land cover and land cover change datasets that span from the 1980s to the present for the United States. The LCMAP product suite provides useful information for land resource management and facilitates studies to improve the understanding of terrestrial ecosystems and the complex dynamics of the Earth system. The LCMAP system could be implemented to produce global land change products in the future.

Earth System Science Data↗

USGS2022

A novel regression method for harmonic analysis of time series

Harmonic analysis of time series is an important technique in remote sensing to reveal seasonal land surface dynamics. However, frequency selection in the harmonic analysis is often difficult because high-frequency components are useful for delineating seasonal dynamics but sensitive to noise and gaps in time series. On the other hand, it is challenging to obtain temporally continuous satellite data with high quality because of atmospheric contamination. We developed a novel regression method named Harmonic Adaptive Penalty Operator (HAPO) for harmonic analysis of unevenly distributed time series. We introduced a new penalty function to minimize unexpected fluctuations in the model, which can substantially reduce the overfitting issue of regression in time series with temporal gaps. Specifically, the new penalty function minimizes the length of the model curve and the value range difference between the model and the time series observations. We compared HAPO with three widely used regression methods (OLS: Ordinary Least Squares; LASSO: Least Absolute Shrinkage and Selection Operator; and Ridge) in different scenarios using Landsat time series data across the United States. First, we evaluated methods using the Landsat surface reflectance time series within a single year. HAPO showed low and consistent monthly Root Mean Square Deviation (RMSD) values, in which most of the time RMSD of predicted reflectance were less than 0.04. More importantly, HAPO showed consistent and less bias given varying density and irregularity of time series. Second, we evaluated methods using multi-year time series. HAPO was a better predictor of relatively short time series (< 4 years) with steady low RMSD values. When a longer time series ( 4 years) was used, all four methods showed similar RMSD values, but HAPO outperformed the other methods if there were temporal gaps. Therefore, for places with large seasonal observation gaps or for time series that are relatively short (less than 4 years), HAPO can provide more consistent and accurate results in harmonic analysis of time series.

ISPRS Journal of Photogrammetry and Remote Sensing↗

USGS2022

Development of the LCMAP annual land cover product across Hawai'i

Following the completion of land cover and change (LCC) products for the conterminous United States (CONUS), the U.S. Geological Survey's (USGS’s) Land Change Monitoring, Assessment, and Projection initiative has broadened the capability of characterizing continuous historical land change across the full Landsat records for Hawaiʻi at 30-meter resolution. One of the challenges of implementing the LCMAP framework to process annual land cover maps in Hawaiʻi is to collect sufficient high-quality training data. Although multiple datasets depicting land cover information are available in Hawaiʻi, they covered limited time frames and were produced from various remote sensing sources with different, classification categories, spatial resolution, and mapping accuracies. No solo product is suitable to provide LCMAP training data labels on its own. In this paper, we focused on enhancing the LCMAP training datasets to generate land cover products from 2000 to 2019 in Hawaiʻi. A total of 200 independent reference data plots were generated and manually interpreted for validating the mapping results produced by the training datasets. The results revealed that using the appropriate filter of multiple products as training data pools improved the classification model performance. The effect of training datasets (e.g., spatial coverage, quality) on accuracies for different land cover types were summarized. The LCMAP land surface change products for Hawaiʻi are available at https://doi.org/10.5066/P91E8M23 .

Hawaii↗

USGS2021

A novel automatic phenology learning (APL) method of training sample selection using multiple datasets for time-series land cover mapping

The long record of Landsat imagery, which is the cornerstone of Earth observation, provides an opportunity to monitor land use and land cover (LULC) change and understand the interactions between the climate and earth system through time. A few change detection algorithms such as Continuous Change Detection and Classification (CCDC) have been developed to utilize all available Landsat images for change detection and characterization at local or global scales. However, the reliable, rapid, and reproducible collection of training samples have become a challenge for time series land cover classification at a large scale. To meet the challenge, we proposed an automatic phenology learning (APL) method with the assumption that the temporal profiles of samples within the same land cover type are the same or similar at a local scale to generate evenly distributed training samples automatically. We designed the method to build land cover patterns for each category based on consensus samples derived from multiple existing scientific datasets including LANDFIRE's (LF) Existing Vegetation Type (EVT), USGS National Land Cover Database (NLCD), National Agricultural Statistics Service (NASS) Cropland Data Layer (CDL), and National Wetlands Inventory (NWI). Then we calculated the Time-Weighted Dynamic Time Warping (twDTW) distance between any undefined samples and land cover patterns in the same geographical region as prior knowledge. Finally, we selected the optimal land cover category for each undefined sample from the land cover products based on the designed criteria iteratively using the twDTW distance as an indicator. The method was applied in the footprint of 10 selected Landsat Analysis Ready Data (ARD) tiles in the eastern and western conterminous United States (CONUS) to produce annual land cover maps from 1985 to 2017. The accuracy assessment and visual comparison revealed that the APL method can generate reliable training samples without any manual interpretation, producing better land cover results especially for the grass/shrub and wetland land cover classes. Applying the APL method, the overall accuracy of the annual land cover maps was improved by 2% over the accuracy of Land Change Monitoring, Assessment, and Projection (LCMAP) Collection 1.0 Science Products in the research regions. Our results also indicate that the APL method provides an approach for best use of different land cover products and meets the requirement of intensive sampling for training data collection.

Remote Sensing of Environment↗

USGS2019

Overall methodology design for the United States National Land Cover Database 2016 products

The National Land Cover Database (NLCD) 2016 provides a suite of data products, including land cover and land cover change of the conterminous United States from 2001 to 2016, at two- to three-year intervals. The development of this product is part of an effort to meet the growing demand for longer temporal duration and more frequent, accurate, and consistent land cover and change information. To accomplish this, we designed a new land cover strategy and developed comprehensive methods, models, and procedures for NLCD 2016 implementation. Major steps in the new procedures consist of data preparation, land cover change detection and classification, theme-based postprocessing, and final integration. Data preparation includes Landsat imagery selection, cloud detection, and cloud filling, as well as compilation and creation of more than 30 national-scale ancillary datasets. Land cover change detection includes single-date water and snow/ice detection algorithms and models, two-date multi-index integrated change detection models, and long-term multi-date change algorithms and models. The land cover classification includes seven-date training data creation and 14-run classifications. Pools of training data for change and no-change areas were created before classification based on integrated information from ancillary data, change-detection results, Landsat spectral and temporal information, and knowledge-based trajectory analysis. In postprocessing, comprehensive models for each land cover theme were developed in a hierarchical order to ensure the spatial and temporal coherence of land cover and land cover changes over 15 years. An initial accuracy assessment on four selected Landsat path/rows classified with this method indicates an overall accuracy of 82.0% at an Anderson Level II classification and 86.6% at the Anderson Level I classification after combining the primary and alternate reference labels. This methodology was used for the operational production of NLCD 2016 for the Conterminous United States, with final produced products available for free download.

Remote Sensing↗