Search USGS⌕ Search

Geology topics

Christopher J. Potter

Publications and source records attributed to Christopher J. Potter.

At least 19 recordsLinked to original sources
USGS2022

The Coles Hill uranium deposit, Virginia, USA: Geology, geochemistry, geochronology, and genetic model

The Coles Hill uranium deposit with an indicated resource of about 130 million lbs. of U 3 O 8 is the largest unmined uranium deposit in the United States. The deposit is hosted in the Taconian (approximately 480 – 450 Ma) Martinsville igneous complex, which consists of the Ordovician Leatherwood Granite (granodiorite) and Silurian Rich Acres Formation (diorite). The host rock was metamorphosed to orthogneiss during the Alleghanian orogeny (approximately 325 – 260 Ma) when it also underwent dextral strike-slip movement along the Brookneal shear zone. During the Triassic, extensional tectonics led to the development of the Dan River Basin that lies east of Coles Hill. The mineralized zone is hosted in brittle structures in the footwall of the Triassic Chatham fault that forms the western edge of the basin. Within brittle fracture zones, uranium silicate and uranium-bearing fluorapatite with traces of brannerite form veins and breccia fill with chlorite, quartz, calcite, titanium oxide, pyrite, and calcite. Uranium silicates also coat and replace primary titanite, zircon, ilmenite, and sulfides. Sodium metasomatism preceded and accompanied uranium mineralization, pervasively altering host rock, and forming albite from primary feldspar, depositing limpid albite rims on feldspar, altering titanite to titanium oxide and calcite and forming riebeckite. Various geothermometers suggest temperatures of less than approximately ~200°C during mineralization. In situ U-Pb analyses of titanite, Ti-oxide, and apatite, and Rb/Sr and U/Pb isotope-systematics of whole rock samples resolve the timing of geologic processes affecting Coles Hill. The host Leatherwood granite containing primary euhedral titanite is dated at 450 – 445 Ma, in agreement with previously obtained ages from zircon in the Martinsville igneous complex. A regional metamorphic event at 330 – 310 Ma formed anhedral titanite and some apatite, re-equilibrated whole rock Rb/Sr and U-Pb isotopes and is interpreted to have coincided with movement along the Brookneal shear zone. During shearing and metamorphism primary refractory uranium-bearing minerals including titanite, zircon, and uranothorite were recrystallized and uranium was liberated and incorporated locally into hematite, clay, and other fine-grained minerals. Uranium mineralization was accompanied by a metasomatic episode between 250 and 200 Ma that reset the Rb-Sr and U-Pb isotope systems, forming titanite and apatite that are associated and in places intimately intergrown with uranium silicate dating mineralization. This event coincides with rifting that formed the Dan River Basin and was a precursor to the breakup of Pangea. Based on the close spatial and temporal association of uranium with apatite, we conclude that uranium was carried as a uranyl-phosphate complex. The release of calcium during sodium metasomatic alteration of primary calcic feldspar and titanite in the host rock initiated successive reactions in which uranium and phosphate in mineralizing fluids combined with calcium to form U-enriched fluorapatite. Excess uranium was locally reduced by coupled redox reactions involving ferrous iron and sulfide minerals in the host rock, forming uranium silicates. Based on the deposit mineralogy, oxygen isotope geochemistry and trace element characteristics of uranium silicate and gangue minerals the primary mineralizing fluids likely included connate and/or meteoric water sourced from the local Dan River Basin. High heat flow related to Mesozoic rifting may have driven these (P-Na-F-rich) brines through local aquifers and into basin margin faults, transporting uranium from the basin or mobilizing uranium from previously formed U-minerals in the Brookneal shear zone, or from U-enriched older basement rock.

Virginia↗
USGS2020

Three-dimensional shape and structure of the Susitna basin, south-central Alaska, from geophysical data

We use gravity, magnetic, seismic reflection, well, and outcrop data to determine the three-dimensional shape and structural features of south-central Alaska’s Susitna basin. This basin is located within the Aleutian-Alaskan convergent margin region and is expected to show effects of regional subduction zone processes. Aeromagnetic data, when filtered to highlight anomalies associated with sources within the upper few kilometers, show numerous linear northeast-trending highs and some linear north-trending highs. Comparisons to seismic reflection and well data show that these highs correspond to areas where late Paleocene to early Eocene volcanic layers have been locally uplifted due to folding and/or faulting. The combined magnetic and seismic reflection data suggest that the linear highs represent northeast-trending folds and north-striking faults. Several lines of evidence suggest that the northeast-trending folds formed during the middle Eocene to early Miocene and may have continued to be active in the Pliocene. The north-striking faults, which in some areas appear to cut the northeast-trending folds, show evidence of Neogene and probable modern movement. Gravity data facilitate estimates of the shape and depth of the basin. This was accomplished by separating the observed gravity anomaly into two components—one representing low-density sedimentary fill within the basin and one representing density heterogeneities within the underlying crystalline basement. We then used the basin anomaly, seismic reflection data, and well data to estimate the depth of the basin. Together, the magnetic, gravity, and reflection seismic analyses reveal an asymmetric basin comprising sedimentary rock over 4 km thick with steep, fault-bounded sides to the southwest, west, and north and a mostly gentle rise toward the east. Relations to the broader tectonic regime are suggested by fold axis orientations within the Susitna basin and neighboring Cook Inlet basin, which are roughly parallel to the easternmost part of the Alaska-Aleutian trench and associated Wadati-Benioff zone as it trends from northeast to north-northeast to northeast. An alignment between forearc basin folds and the subduction zone trench has been observed at other convergent margins, attributed to strain partitioning generated by regional rheologic variations that are associated with the subducting plate and arc magmatism. The asymmetric shape of the basin, especially its gentle rise to the east, may reflect uplift associated with flat-slab subduction of the Yakutat microplate, consistent with previous work that suggested Yakutat influence on the nearby Talkeetna Mountains and western Alaska Range. Yakutat subduction may also have contributed to Neogene and later reverse slip along north-striking faults within the Susitna basin.

Alaska↗
USGS2019

Europa’s ice tectonics: New insights from physical wax experiments with implications for subduction initiation and global resurfacing processes

Jupiter's Moon Europa has one of the youngest geological surfaces in our solar system with an age of 40–90 Ma, implying an intense history of resurfacing. The surface of Europa indeed shows abundant evidence of tectonic deformation related to extension, strike-slip, and shortening. However, observed features related to shortening are scarce compared with pervasive extensive extensional features such as dilational bands, and do not suffice as the sole mechanism for recycling aging terranes. Recently, evidence for potential plate tectonics, associated with subduction zones , has been discovered on Europa; this could be responsible for recycling most of Europa's surface. However, basic physical parameters needed to initiate subduction on Europa, such as thickness of the brittle layer, deformation rates, and orientation of pre-existing zones of weakness at which subduction could start, are not well understood. Here, we aim to better understand the process and the conditions that could lead to initiation of subduction on Europa through physical experiments, using wax to simulate Europa's two-layered (i.e. convective) icy crust. By deforming the wax, strain on Europa's surface—possibly caused by diurnal tides or its nonsynchronous rotation—is simulated. Our results indicate that subduction could initiate over a broad range of surface thicknesses and deformation rates above a minimum conductive layer thickness, but is strongly dependent on the orientation of the pre-existing zones of weakness. Very thin conductive layer experiments, however, result in a previously undescribed process that we term ductile rolldown, which creates surface features similar to double ridges observed on Europa. Thus, subduction and ductile rolldown represent physically plausible mechanisms that could play a critical role in resurfacing Europa throughout its geologic history. These results could yield significant implications for Europa's thermal history and evolution, habitability, and future spacecraft missions.

Icarus↗
USGS2018

Late Cretaceous-Cenozoic exhumation of the western Brooks Range, Alaska, revealed from apatite and zircon fission track data

We report data for 112 apatite and 31 zircon fission track (AFT and ZFT) outcrop sandstone samples along a transect that spans the western Brooks Range. Sampling targeted structures that modify the Middle Jurassic‐Early Cretaceous early Brookian orogen. The AFT samples record latest Cretaceous to Eocene in situ exhumational cooling and resolve two kinematic phases. The first phase was focused at 65–60 Ma. To the north, cooling age patterns at this time are attributable to wide‐spaced fault‐related folding. Farther south, within the allochthon belt, exhumation was related to uplift of a broad region, likely in the hanging wall of deep‐seated faults that extend into basement rocks. The second kinematic phase occurred around ~45 Ma. It was characterized by north and east directed thrusting to the north, and coeval extension in the allochthon belt to the south. The ZFT cooling ages are all Early Cretaceous or older and put an upper limit on the magnitude of Cenozoic exhumation across the western Brooks Range. Synthesis of exhumation patterns and structural styles show that Paleocene rejuvenation of contraction was roughly contemporaneous along the entire ~1,000‐km orogen. Later, around ~45 Ma in the Eocene, contraction in the frontal parts of the orogen was contemporaneous with extension interior to the orogen. Following previous authors, we suggest that the Paleocene rejuvenation was a far‐field response to subduction of a mid‐ocean ridge in southern Alaska. However, by the Eocene, strain patterns in the western Brooks Range changed, possibly to accommodate rotations of fault blocks in southwestern Alaska.

Alaska↗
USGS2018

Paleozoic shale gas resources in the Sichuan Basin, China

The Sichuan Basin, China, is commonly considered to contain the world’s most abundant shale gas resources. Although its Paleozoic marine shales share many basic characteristics with successful United States gas shales, numerous geologic uncertainties exist, and Sichuan Basin shale gas production is nascent. Gas retention was likely compromised by the age of the shale reservoirs, multiple uplifts and orogenies, and migration pathways along unconformities. High thermal maturities raise questions about gas storage potential in lower Paleozoic shales. Given these uncertainties, a new look at Sichuan Basin shale gas resources is advantageous. As part of a systematic effort to quantitatively assess continuous oil and gas resources in priority basins worldwide, the US Geological Survey (USGS) completed an assessment of Paleozoic shale gas in the Sichuan Basin in 2015. Three organic-rich marine Paleozoic shale intervals meet the USGS geologic criteria for quantitative assessment of shale gas resources: the lower Cambrian Qiongzhusi Formation, the uppermost Ordovician Wufeng through lowermost Silurian Longmaxi Formations (currently producing shale gas), and the upper Permian Longtan and Dalong Formations. This study defined geologically based assessment units and calculated probabilistic distributions of technically recoverable shale gas resources using the USGS well productivity–based method. For six assessment units evaluated in 2015, the USGS estimated a mean value of 23.9 tcf (677 billion cubic meters) of undiscovered, technically recoverable shale gas. This result is considerably lower than volumes calculated in previous shale gas assessments of the Sichuan Basin, highlighting a need for caution in this geologically challenging setting.

Sichuan Basin↗
USGS2016

Late Oligocene to present contractional structure in and around the Susitna basin, Alaska—Geophysical evidence and geological implications

The Cenozoic Susitna basin lies within an enigmatic lowland surrounded by the Central Alaska Range, Western Alaska Range (including the Tordrillo Mountains), and Talkeetna Mountains in south-central Alaska. Some previous interpretations show normal faults as the defining structures of the basin (e.g., Kirschner, 1994). However, analysis of new and existing geophysical data shows predominantly (Late Oligocene to present) thrust and reverse fault geometries in the region, as previously proposed by Hackett (1978). A key example is the Beluga Mountain fault where a 50-mGal gravity gradient, caused by the density transition from the igneous bedrock of Beluga Mountain to the >4-km-thick Cenozoic sedimentary section of Susitna basin, spans a horizontal distance of ∼40 km and straddles the topographic front. The location and shape of the gravity gradient preclude a normal fault geometry; instead, it is best explained by a southwest-dipping thrust fault, with its leading edge located several kilometers to the northeast of the mountain front, concealed beneath the shallow glacial and fluvial cover deposits. Similar contractional fault relationships are observed for other basin-bounding and regional faults as well. Contractional structures are consistent with a regional shortening strain field inferred from differential offsets on the Denali and Castle Mountain right-lateral strike-slip fault systems.

Alaska↗
USGS2015

Preliminary interpretation of industry two-dimensional seismic data from Susitna Basin, south-central Alaska

Located approximately 80 kilometers northwest of Anchorage, Alaska, the Susitna Basin is a complex sedimentary basin whose tectonic history has been poorly understood. Recent interpretation of two-dimensional seismic reflection data integrated with well, aeromagnetic, and gravity data provides new insights into the structural and stratigraphic nature of the basin. This report presents an interpretation of 41 two-dimensional seismic reflection lines, acquired by industry from the 1960s to the 1980s. Our interpretation of the seismic data focused mainly on picking two Eocene stratigraphic units and a presumed base of Tertiary horizon. Based on our interpretation of the seismic data, the structural features in the basin appear to be generally contractional, as evidenced by the presence of many reverse faults, thrust faults, and folds, with the contraction mainly oriented east-west. This result is contrary to prior inferences of most previous geologic studies that showed normal faults. Several regional reverse faults have been identified in the seismic data and appear to divide the basin into three regions or “sides”: east, west, and south. The eastern seismic lines show evidence of numerous short-wavelength antiforms that appear to correspond to a series of northeast-trending lineations observed in aeromagnetic data, which have been interpreted as being due to folding of Paleogene volcanic strata. The eastern side of the basin is also cut by a number of reverse faults and thrust faults, the majority of which strike north-south. The western side of the Susitna Basin is cut by a series of regional reverse faults and is characterized by synformal structures in two fault blocks between the Kahiltna River and Skwentna faults. These synforms are progressively deeper to the west in the footwalls of the east-vergent Skwentna and northeast-vergent Beluga Mountain reverse faults. Although the seismic data are limited to the south, we interpret a potential regional south-southeast-directed reverse fault striking east-northeast on the east side of the basin that may cross the entire southern portion of the basin.

Alaska↗
USGS2015

Assessment of surface water chloride and conductivity trends in areas of unconventional oil and gas development — Why existing national data sets cannot tell us what we would like to know

Heightened concern regarding the potential effects of unconventional oil and gas development on regional water quality has emerged, but the few studies on this topic are limited in geographic scope. Here we evaluate the potential utility of national and publicly available water-quality data sets for addressing questions regarding unconventional oil and gas development. We used existing U.S. Geological Survey and U.S. Environmental Protection Agency data sets to increase understanding of the spatial distribution of unconventional oil and gas development in the U.S. and broadly assess surface water quality trends in these areas. Based on sample size limitations, we were able to estimate trends in specific conductance (SC) and chloride (Cl − ) from 1970 to 2010 in 16% ( n = 155) of the watersheds with unconventional oil and gas resources. We assessed these trends relative to spatiotemporal distributions of hydraulically fractured wells. Results from this limited analysis suggest no consistent and widespread trends in surface water quality for SC and Cl − in areas with increasing unconventional oil and gas development and highlight limitations of existing national databases for addressing questions regarding unconventional oil and gas development and water quality.

Water Resources Research↗
USGS2014

U.S. Geological Survey Science for the Wyoming Landscape Conservation Initiative: 2012 annual report

Southwest Wyoming contains abundant energy resources, wildlife, habitat, open spaces, and outdoor recreational opportunities. Although energy exploration and development have been taking place in the region since the late 1800s, the pace of development for fossil fuels and renewable energy increased significantly in the early 2000s. This and the associated urban and exurban development are leading to landscape-level environmental and socioeconomic changes that have the potential to diminish wildlife habitat and other natural resources, and the quality of human lives, in Southwest Wyoming. The potential for negative effects of these changes prompted Federal, State, and local agencies to undertake the Wyoming Landscape Conservation Initiative for Southwest Wyoming.

Wyoming↗