Geology topics

Chengquan Huang

Publications and source records attributed to Chengquan Huang.

At least 19 recordsLinked to original sources

USGS2020

Mapping forested wetland inundation in the Delmarva Peninsula, USA: Use of deep learning model

The Delmarva Peninsula in the eastern United States is dominated by thousands of small, forested depressional wetlands that are highly sensitive to climate change and climate variability but provide critical ecosystem services. Due to the relatively small size of these depressional wetlands and occurrence under forest canopy cover, it is very challenging to map their inundation status based on existing remote sensing data and traditional classification approaches. In this study, we applied a state-of-the-art deep semantic segmentation network to map forested wetland inundation in the Delmarva region by integrating leaf-off Worldview-3 (WV3) multispectral data with fine resolution light detection and ranging (lidar) intensity and topographic data, including digital elevation model (DEM) and topographic wetness index (TWI). Wetland inundation maps generated from lidar intensity were used for model calibration and validation. The wetland inundation map results were also validated by field polygons and compared to the U.S. Fish and Wildlife Service National Wetlands Inventory (NWI) geospatial dataset and a random forest output from a previous study. Our results demonstrate that our deep learning model can accurately determine inundation status with an overall accuracy of 95% against field data and high overlap with lidar mapped inundation. The integration of topographic metrics in deep learning model can improve classification accuracy in depressional wetlands. This study highlights the great potential of deep learning models to map wetland inundation through use of high resolution optical and lidar remote sensing datasets.

Maryland↗

USGS2018

Automated extraction of surface water extent from Sentinel-1 data

Accurately quantifying surface water extent in wetlands is critical to understanding their role in ecosystem processes. However, current regional- to global-scale surface water products lack the spatial or temporal resolution necessary to characterize heterogeneous or variable wetlands. Here, we proposed a fully automatic classification tree approach to classify surface water extent using Sentinel-1 synthetic aperture radar (SAR) data and training datasets derived from prior class masks. Prior classes of water and non-water were generated from the Shuttle Radar Topography Mission (SRTM) water body dataset (SWBD) or composited dynamic surface water extent (cDSWE) class probabilities. Classification maps of water and non-water were derived over two distinct wetlandscapes: the Delmarva Peninsula and the Prairie Pothole Region. Overall classification accuracy ranged from 79% to 93% when compared to high-resolution images in the Prairie Pothole Region site. Using cDSWE class probabilities reduced omission errors among water bodies by 10% and commission errors among non-water class by 4% when compared with results generated by using the SWBD water mask. These findings indicate that including prior water masks that reflect the dynamics in surface water extent (i.e., cDSWE) is important for the accurate mapping of water bodies using SAR data.

Remote Sensing↗

USGS2018

Mapping forest change using stacked generalization: An ensemble approach

The ever-increasing volume and accessibility of remote sensing data has spawned many alternative approaches for mapping important environmental features and processes. For example, there are several viable but highly varied strategies for using time series of Landsat imagery to detect changes in forest cover. Performance among algorithms varies across complex natural systems, and it is reasonable to ask if aggregating the strengths of an ensemble of classifiers might result in increased overall accuracy. Relatively simple rules have been used in the past to aggregate classifications among remotely sensed maps (e.g. using majority predictions), and in other fields, empirical models have been used to create situationally specific algorithm weights. The latter process, called “stacked generalization” (or “stacking”), typically uses a parametric model for the fusion of algorithm outputs. We tested the performance of several leading forest disturbance detection algorithms against ensembles of the outputs of those same algorithms based upon stacking using both parametric and Random Forests-based fusion rules. Stacking using a Random Forests model cut omission and commission error rates in half in many cases in relation to individual change detection algorithms, and cut error rates by one quarter compared to more conventional parametric stacking. Stacking also offers two auxiliary benefits: alignment of outputs to the precise definitions built into a particular set of empirical calibration data; and, outputs which may be adjusted such that map class totals match independent estimates of change in each year. In general, ensemble predictions improve when new inputs are added that are both informative and uncorrelated with existing ensemble components. As increased use of cloud-based computing makes ensemble mapping methods more accessible, the most useful new algorithms may be those that specialize in providing spectral, temporal, or thematic information not already available through members of existing ensembles.

Remote Sensing of Environment↗

USGS2017

Automated quantification of surface water inundation in wetlands using optical satellite imagery

We present a fully automated and scalable algorithm for quantifying surface water inundation in wetlands. Requiring no external training data, our algorithm estimates sub-pixel water fraction (SWF) over large areas and long time periods using Landsat data. We tested our SWF algorithm over three wetland sites across North America, including the Prairie Pothole Region, the Delmarva Peninsula and the Everglades, representing a gradient of inundation and vegetation conditions. We estimated SWF at 30-m resolution with accuracies ranging from a normalized root-mean-square-error of 0.11 to 0.19 when compared with various high-resolution ground and airborne datasets. SWF estimates were more sensitive to subtle inundated features compared to previously published surface water datasets, accurately depicting water bodies, large heterogeneously inundated surfaces, narrow water courses and canopy-covered water features. Despite this enhanced sensitivity, several sources of errors affected SWF estimates, including emergent or floating vegetation and forest canopies, shadows from topographic features, urban structures and unmasked clouds. The automated algorithm described in this article allows for the production of high temporal resolution wetland inundation data products to support a broad range of applications.

Remote Sensing↗

USGS2017

How similar are forest disturbance maps derived from different Landsat time series algorithms?

Disturbance is a critical ecological process in forested systems, and disturbance maps are important for understanding forest dynamics. Landsat data are a key remote sensing dataset for monitoring forest disturbance and there recently has been major growth in the development of disturbance mapping algorithms. Many of these algorithms take advantage of the high temporal data volume to mine subtle signals in Landsat time series, but as those signals become subtler, they are more likely to be mixed with noise in Landsat data. This study examines the similarity among seven different algorithms in their ability to map the full range of magnitudes of forest disturbance over six different Landsat scenes distributed across the conterminous US. The maps agreed very well in terms of the amount of undisturbed forest over time; however, for the ~30% of forest mapped as disturbed in a given year by at least one algorithm, there was little agreement about which pixels were affected. Algorithms that targeted higher-magnitude disturbances exhibited higher omission errors but lower commission errors than those targeting a broader range of disturbance magnitudes. These results suggest that a user of any given forest disturbance map should understand the map’s strengths and weaknesses (in terms of omission and commission error rates), with respect to the disturbance targets of interest.

Forests↗

USGS2016

Selection and quality assessment of Landsat data for the North American forest dynamics forest history maps of the US

Using the NASA Earth Exchange platform, the North American Forest Dynamics (NAFD) project mapped forest history wall-to-wall, annually for the contiguous US (1986–2010) using the Vegetation Change Tracker algorithm. As with any effort to identify real changes in remotely sensed time-series, data gaps, shifts in seasonality, misregistration, inconsistent radiometry and cloud contamination can be sources of error. We discuss the NAFD image selection and processing stream (NISPS) that was designed to minimize these sources of error. The NISPS image quality assessments highlighted issues with the Landsat archive and metadata including inadequate georegistration, unreliability of the pre-2009 L5 cloud cover assessments algorithm, missing growing-season imagery and paucity of clear views. Assessment maps of Landsat 5–7 image quantities and qualities are presented that offer novel perspectives on the growing-season archive considered for this study. Over 150,000+ Landsat images were considered for the NAFD project. Optimally, one high quality cloud-free image in each year or a total of 12,152 images would be used. However, to accommodate data gaps and cloud/shadow contamination 23,338 images were needed. In 220 specific path-row image years no acceptable images were found resulting in data gaps in the annual national map products.

International Journal of Digital Earth↗

USGS2014

An approach for mapping large-area impervious surfaces: Synergistic use of Landsat-7 ETM+ and high spatial resolution imagery

A wide range of urban ecosystem studies, including urban hydrology, urban climate, land use planning, and resource management, require current and accurate geospatial data of urban impervious surfaces. We developed an approach to quantify urban impervious surfaces as a continuous variable by using multisensor and multisource datasets. Subpixel percent impervious surfaces at 30-m resolution were mapped using a regression tree model. The utility, practicality, and affordability of the proposed method for large-area imperviousness mapping were tested over three spatial scales (Sioux Falls, South Dakota, Richmond, Virginia, and the Chesapeake Bay areas of the United States). Average error of predicted versus actual percent impervious surface ranged from 8.8 to 11.4%, with correlation coefficients from 0.82 to 0.91. The approach is being implemented to map impervious surfaces for the entire United States as one of the major components of the circa 2000 national land cover database.

Canadian Journal of Remote Sensing↗

USGS2013

Assessment of the NASA-USGS Global Land Survey (GLS) Datasets

The Global Land Survey (GLS) datasets are a collection of orthorectified, cloud-minimized Landsat-type satellite images, providing near complete coverage of the global land area decadally since the early 1970s. The global mosaics are centered on 1975, 1990, 2000, 2005, and 2010, and consist of data acquired from four sensors: Enhanced Thematic Mapper Plus, Thematic Mapper, Multispectral Scanner, and Advanced Land Imager. The GLS datasets have been widely used in land-cover and land-use change studies at local, regional, and global scales. This study evaluates the GLS datasets with respect to their spatial coverage, temporal consistency, geodetic accuracy, radiometric calibration consistency, image completeness, extent of cloud contamination, and residual gaps. In general, the three latest GLS datasets are of a better quality than the GLS-1990 and GLS-1975 datasets, with most of the imagery (85%) having cloud cover of less than 10%, the acquisition years clustered much more tightly around their target years, better co-registration relative to GLS-2000, and better radiometric absolute calibration. Probably, the most significant impediment to scientific use of the datasets is the variability of image phenology (i.e., acquisition day of year). This paper provides end-users with an assessment of the quality of the GLS datasets for specific applications, and where possible, suggestions for mitigating their deficiencies.

Remote Sensing of Environment↗

USGS2012

Cross-sensor comparisons between Landsat 5 TM and IRS-P6 AWiFS and disturbance detection using integrated Landsat and AWiFS time-series images

Routine acquisition of Landsat 5 Thematic Mapper (TM) data was discontinued recently and Landsat 7 Enhanced Thematic Mapper Plus (ETM+) has an ongoing problem with the scan line corrector (SLC), thereby creating spatial gaps when covering images obtained during the process. Since temporal and spatial discontinuities of Landsat data are now imminent, it is therefore important to investigate other potential satellite data that can be used to replace Landsat data. We thus cross-compared two near-simultaneous images obtained from Landsat 5 TM and the Indian Remote Sensing (IRS)-P6 Advanced Wide Field Sensor (AWiFS), both captured on 29 May 2007 over Los Angeles, CA. TM and AWiFS reflectances were compared for the green, red, near-infrared (NIR), and shortwave infrared (SWIR) bands, as well as the normalized difference vegetation index (NDVI) based on manually selected polygons in homogeneous areas. All R 2 values of linear regressions were found to be higher than 0.99. The temporally invariant cluster (TIC) method was used to calculate the NDVI correlation between the TM and AWiFS images. The NDVI regression line derived from selected polygons passed through several invariant cluster centres of the TIC density maps and demonstrated that both the scene-dependent polygon regression method and TIC method can generate accurate radiometric normalization. A scene-independent normalization method was also used to normalize the AWiFS data. Image agreement assessment demonstrated that the scene-dependent normalization using homogeneous polygons provided slightly higher accuracy values than those obtained by the scene-independent method. Finally, the non-normalized and relatively normalized ‘Landsat-like’ AWiFS 2007 images were integrated into 1984 to 2010 Landsat time-series stacks (LTSS) for disturbance detection using the Vegetation Change Tracker (VCT) model. Both scene-dependent and scene-independent normalized AWiFS data sets could generate disturbance maps similar to what were generated using the LTSS data set, and their kappa coefficients were higher than 0.97. These results indicate that AWiFS can be used instead of Landsat data to detect multitemporal disturbance in the event of Landsat data discontinuity.

International Journal of Remote Sensing↗

USGS2011

Detecting post-fire burn severity and vegetation recovery using multitemporal remote sensing spectral indices and field-collected composite burn index data in a ponderosa pine forest

It is challenging to detect burn severity and vegetation recovery because of the relatively long time period required to capture the ecosystem characteristics. Multitemporal remote sensing data can providemultitemporal observations before, during and after a wildfire, and can improve the change detection accuracy. The goal of this study is to examine the correlations between multitemporal spectral indices and field-observed burn severity, and to provide a practical method to estimate burn severity and vegetation recovery. The study site is the Jasper Fire area in the Black Hills National Forest, South Dakota, that burned during August and September 2000. Six multitemporal Landsat images acquired from 2000 (pre-fire), 2001 (post-fire), 2002, 2003, 2005 and 2007 were used to assess burn severity. The normalized difference vegetation index (NDVI), enhanced vegetation index (EVI), normalized burn ratio (NBR), integrated forest index (IFI) and the differences of these indices between the pre-fire and post-fire years were computed and analysed with 66 field-based composite burn index (CBI) plots collected in 2002. Results showed that differences of NDVI and differences of EVI between the pre-fire year and the first two years post-fire were highly correlated with the CBI scores. The correlations were low beyond the second year post-fire. Differences of NBR had good correlation with CBI scores in all study years. Differences of IFI had low correlation with CBI in the first year post-fire and had good correlation in later years. A CBI map of the burnt area was produced using regression tree models and the multitemporal images. The dynamics of four spectral indices from 2000 to 2007 indicated that both NBR and IFI are valuable for monitoring long-term vegetation recovery. The high burn severity areas had a much slower recovery than the moderate and low burn areas.

International Journal of Remote Sensing↗

USGS2011

Monitoring landscape change for LANDFIRE using multi-temporal satellite imagery and ancillary data

LANDFIRE is a large interagency project designed to provide nationwide spatial data for fire management applications. As part of the effort, many 2000 vintage Landsat Thematic Mapper and Enhanced Thematic Mapper plus data sets were used in conjunction with a large volume of field information to generate detailed vegetation type and structure data sets for the entire United States. In order to keep these data sets current and relevant to resource managers, there was strong need to develop an approach for updating these products. We are using three different approaches for these purposes. These include: 1) updating using Landsat-derived historic and current fire burn information derived from the Monitoring Trends in Burn Severity project; 2) incorporating vegetation disturbance information derived from time series Landsat data analysis using the Vegetation Change Tracker; and 3) developing data products that capture subtle intra-state disturbance such as those related to insects and disease using either Landsat or the Moderate Resolution Imaging Spectroradiometer (MODIS). While no one single approach provides all of the land cover change and update information required, we believe that a combination of all three captures most of the disturbance conditions taking place that have relevance to the fire community.

IEEE Journal of Selected Topics in Applied Earth O↗

USGS2010

Automated masking of cloud and cloud shadow for forest change analysis using Landsat images

Accurate masking of cloud and cloud shadow is a prerequisite for reliable mapping of land surface attributes. Cloud contamination is particularly a problem for land cover change analysis, because unflagged clouds may be mapped as false changes, and the level of such false changes can be comparable to or many times more than that of actual changes, even for images with small percentages of cloud cover. Here we develop an algorithm for automatically flagging clouds and their shadows in Landsat images. This algorithm uses clear view forest pixels as a reference to define cloud boundaries for separating cloud from clear view surfaces in a spectral-temperature space. Shadow locations are predicted according to cloud height estimates and sun illumination geometry, and actual shadow pixels are identified by searching the darkest pixels surrounding the predicted shadow locations. This algorithm produced omission errors of around 1% for the cloud class, although the errors were higher for an image that had very low cloud cover and one acquired in a semiarid environment. While higher values were reported for other error measures, most of the errors were found around the edges of detected clouds and shadows, and many were due to difficulties in flagging thin clouds and the shadow cast by them, both by the developed algorithm and by the image analyst in deriving the reference data. We concluded that this algorithm is especially suitable for forest change analysis, because the commission and omission errors of the derived masks are not likely to significantly bias change analysis results.

International Journal of Remote Sensing↗

USGS2010

An automated approach for reconstructing recent forest disturbance history using dense Landsat time series stacks

A highly automated algorithm called vegetation change tracker (VCT) has been developed for reconstructing recent forest disturbance history using Landsat time series stacks (LTSS). This algorithm is based on the spectral–temporal properties of land cover and forest change processes, and requires little or no fine tuning for most forests with closed or near close canopy cover. It was found very efficient, taking 2–3 h on average to analyze an LTSS consisting of 12 or more Landsat images using an average desktop PC. This LTSS-VCT approach has been used to examine disturbance patterns with a biennial temporal interval from 1984 to 2006 for many locations across the conterminous U.S. Accuracy assessment over 6 validation sites revealed that overall accuracies of around 80% were achieved for disturbances mapped at individual year level. Average user's and producer's accuracies of the disturbance classes were around 70% and 60% in 5 of the 6 sites, respectively, suggesting that although forest disturbances were typically rare as compared with no-change classes, on average the VCT detected more than half of those disturbances with relatively low levels of false alarms. Field assessment revealed that VCT was able to detect most stand clearing disturbance events, including harvest, fire, and urban development, while some non-stand clearing events such as thinning and selective logging were also mapped in western U.S. The applicability of the LTSS-VCT approach depends on the availability of a temporally adequate supply of Landsat imagery. To ensure that forest disturbance records can be developed continuously in the future, it is necessary to plan and develop observational capabilities today that will allow continuous acquisition of frequent Landsat or Landsat-like observations.

Remote Sensing of Environment↗

USGS2009

Assessing rates of forest change and fragmentation in Alabama, USA, using the vegetation change tracker model

Forest change is of great concern for land use decision makers and conservation communities. Quantitative and spatial forest change information is critical for addressing many pressing issues, including global climate change, carbon budgets, and sustainability. In this study, our analysis focuses on the differences in geospatial patterns and their changes between federal forests and nonfederal forests in Alabama over the time period 1987–2005, by interpreting 163 Landsat Thematic Mapper (TM) scenes using a vegetation change tracker (VCT) model. Our analysis revealed that for the most part of 1990 s and between 2000 and 2005, Alabama lost about 2% of its forest on an annual basis due to disturbances, but much of the losses were balanced by forest regeneration from previous disturbances. The disturbance maps revealed that federal forests were reasonably well protected, with the fragmentation remaining relatively stable over time. In contrast, nonfederal forests, which are predominant in area share (about 95%), were heavily disturbed, clearly demonstrating decreasing levels of fragmentation during the time period 1987–1993 giving way to a subsequent accelerating fragmentation during the time period 1994–2005. Additionally, the identification of the statistical relationships between forest fragmentation status and forest loss rate and forest net change rate in relation to land ownership implied the distinct differences in forest cutting rate and cutting patterns between federal forests and nonfederal forests. The forest spatial change information derived from the model has provided valuable insights regarding regional forest management practices and disturbance regimes, which are closely associated with regional economics and environmental concerns.

Forest Ecology and Management↗

USGS2009

Developing consistent Landsat data sets for large area applications: the MRLC 2001 protocol

One of the major efforts in large area land cover mapping over the last two decades was the completion of two U.S. National Land Cover Data sets (NLCD), developed with nominal 1992 and 2001 Landsat imagery under the auspices of the MultiResolution Land Characteristics (MRLC) Consortium. Following the successful generation of NLCD 1992, a second generation MRLC initiative was launched with two primary goals: (1) to develop a consistent Landsat imagery data set for the U.S. and (2) to develop a second generation National Land Cover Database (NLCD 2001). One of the key enhancements was the formulation of an image preprocessing protocol and implementation of a consistent image processing method. The core data set of the NLCD 2001 database consists of Landsat 7 Enhanced Thematic Mapper Plus (ETM+) images. This letter details the procedures for processing the original ETM+ images and more recent scenes added to the database. NLCD 2001 products include Anderson Level II land cover classes, percent tree canopy, and percent urban imperviousness at 30-m resolution derived from Landsat imagery. The products are freely available for download to the general public from the MRLC Consortium Web site at http://www.mrlc.gov.

IEEE Geoscience and Remote Sensing Letters↗

USGS2004

Development of a 2001 National Land Cover Database for the United States

Multi-Resolution Land Characterization 2001 (MRLC 2001) is a second-generation Federal consortium designed to create an updated pool of nation-wide Landsat 5 and 7 imagery and derive a second-generation National Land Cover Database (NLCD 2001). The objectives of this multi-layer, multi-source database are two fold: first, to provide consistent land cover for all 50 States, and second, to provide a data framework which allows flexibility in developing and applying each independent data component to a wide variety of other applications. Components in the database include the following: (1) normalized imagery for three time periods per path/row, (2) ancillary data, including a 30 m Digital Elevation Model (DEM) derived into slope, aspect and slope position, (3) perpixel estimates of percent imperviousness and percent tree canopy, (4) 29 classes of land cover data derived from the imagery, ancillary data, and derivatives, (5) classification rules, confidence estimates, and metadata from the land cover classification. This database is now being developed using a Mapping Zone approach, with 66 Zones in the continental United States and 23 Zones in Alaska. Results from three initial mapping Zones show single-pixel land cover accuracies ranging from 73 to 77 percent, imperviousness accuracies ranging from 83 to 91 percent, tree canopy accuracies ranging from 78 to 93 percent, and an estimated 50 percent increase in mapping efficiency over previous methods. The database has now entered the production phase and is being created using extensive partnering in the Federal government with planned completion by 2006.

Photogrammetric Engineering and Remote Sensing↗

USGS2003

Regional forest land cover characterisation using medium spatial resolution satellite data

Increasing demands on forest resources require comprehensive, consistent and up-to-date information on those resources at spatial scales appropriate for management decision-making and for scientific analysis. While such information can be derived using coarse spatial resolution satellite data (e.g. Tucker et al. 1984; Zhu and Evans 1994; Cihlar et al. 1996; Cihlar et al., Chapter 12), many regional applications require more spatial and thematic details than can be derived by using coarse resolution imagery. High spatial resolution satellite data such as IKONOS and Quick Bird images (Aplin et al. 1997), though usable for deriving detailed forest information (Culvenor, Chapter 9), are currently not feasible for wall-to-wall regional applications because of extremely high data cost, huge data volume, and lack of contiguous coverage over large areas. Forest studies over large areas have often been accomplished using data acquired by intermediate spatial resolution sensor systems, including the Multi-Spectral Scanner (MSS), Thematic Mapper (TM) and the Enhanced Thematic Mapper Plus (ETM+) of Landsat, the High Resolution Visible (HRV) of the Systeme Pour l'Observation de la Terre (SPOT), and the Linear Image Self-Scanner (LISS) of the Indian Remote Sensing satellite. These sensor systems are more appropriate for regional applications because they can routinely produce spatially contiguous data over large areas at relatively low cost, and can be used to derive a host of forest attributes (e.g. Cohen et al. 1995; Kimes et al. 1999; Cohen et al. 2001; Huang et al. 2001; Sugumaran 2001). Of the above intermediate spatial resolution satellites, Landsat is perhaps the most widely used in various types of land remote sensing applications, in part because it has provided more extensive spatial and temporal coverage of the globe than any other intermediate resolution satellite. Spatially contiguous Landsat data have been developed for many regions of the globe (e.g. Lunetta and Sturdevant 1993; Fuller et al. 1994b; Skole et al. 1997), and a circa 1990 Landsat image data set covering the entire land area of the globe has also been developed recently (Jones and Smith 2001). An acquisition strategy aimed at acquiring at least one cloud free image per year for the entire land area of the globe has been initiated for Landsat-7 (Arvidson et al. 2001). This will probably ensure the continued dominance of Landsat in the near future.

Book chapter↗

USGS2003

Deriving annual integrated NDVI greenness at 30 m spatial resolution

Temporal greenness matrics have been found useful for characterizing vegetation phenology, and have been used to discriminate vegetation cover types and to estimate key vegetation attributes including percent cover and green biomass. So far, however, such matrics have been calculated only from coarse resolution satellite data. Intermediate spatial resolution satellites like Landsat cannot provide the temporal resolutions needed for directly calculating such greenness matrics. In this study, we developed a method to indirectly derive annual integrated NDVI at 30 m spatial resolution using 250 m MODIS data and 30 m Landsat ETM+ imagery. Results showed that more than 90% of the variance of the annual integrated NDVI calculated using one full year’s MODIS data could be explained using as few as 3 appropriately selected observations, demonstrating the feasibility of indirectly estimating the annual integrated NDVI at intermediate spatial resolutions, as normally only limited number of useful observations would be available within the life cycle of a typical project at such spatial resolutions. The developed method was applied to two ETM+ paths/rows, for each of which 3 ETM+ images were acquired in roughly spring, summer and fall/winter seasons around the year 2000. Of the total variance of the MODIS annual integrated NDVI, 81% was explained by the three ETM+ images for one path/row and 74% for the other.

Conference Paper↗