Search USGSSearch

Geology topics

C. F. Waythomas

Publications and source records attributed to C. F. Waythomas.

17 recordsLinked to original sources

Introduction - The impacts of the 2008 eruption of Kasatochi Volcano on terrestrial and marine ecosystems in the Aleutian Islands, Alaska

The Aleutian Islands are situated on the northern edge of the so-called “Pacific Ring of Fire,” a 40,000-km-long horseshoe-shaped assemblage of continental landmasses and islands bordering the Pacific Ocean basin that contains many of the world's active and dormant volcanoes. Schaefer et al. (2009) listed 27 historically active volcanoes in the Aleutian Islands, of which nine have had at least one major eruptive event since 1990. Volcanic eruptions are often significant natural disturbances, and ecosystem responses to volcanic eruptions may vary markedly with eruption style (effusive versus explosive), frequency, and magnitude of the eruption as well as isolation of the disturbed sites from potential colonizing organisms (del Moral and Grishin, 1999). Despite the relatively high frequency of volcanic activity in the Aleutians, the response of island ecosystems to volcanic disturbances is largely unstudied because of the region's isolation. The only ecological studies in the region that address the effects of volcanic activity were done on Bogoslof Island, a remote, highly active volcanic island in the eastern Aleutians, which grew from a submarine eruption in 1796 (Merriam, 1910; Byrd et al., 1980; Byrd and Williams, 1994). Nevertheless, in the 214 years of Bogoslof's existence, the island has been visited only intermittently. Kasatochi Island is a small (2.9 km by 2.6 km, 314 m high) volcano in the central Aleutian Islands of Alaska (52.17°N latitude, 175.51°W longitude; Fig. 1) that erupted violently on 7-8 August 2008 after a brief, but intense period of precursory seismic activity (Scott et al., 2010 [this issue]; Waythomas et al., in review). The island is part of the Aleutian arc volcanic front, and is an isolated singular island. Although the immediate offshore areas are relatively shallow (20–50 m water depth), the island is about 10 km south of the 2000 m isobath, north of which, ocean depths increase markedly. Kasatochi is located between the deepwater basin of the Bering Sea to the north and shallower areas of intense upwelling in Atka and Fenimore Passes in the North Pacific Ocean to the south. This area apparently produces high marine productivity based on concentrations of feeding marine birds and mammals (see Drew et al., 2010 [this issue]). Kasatochi is about 85 km northeast of Adak, the nearest community and a regional transportation hub, and about 19 km northwest of the western end of Atka Island. The nearest historically active volcanoes are Great Sitkin volcano, about 35 km to the west, and Korovin volcano on Atka Island, about 94 km to the east. Koniuji Island, another small volcanic island, is located about 25 km east of Kasatochi (Fig. 1).

Alaska

The geomorphology of an Aleutian volcano following a major eruption: The 7-8 August 2008 eruption of Kasatochi Volcano, Alaska, and its aftermath

Analysis of satellite images of Kasatochi volcano and field studies in 2008 and 2009 have shown that within about one year of the 78 August 2008 eruption, significant geomorphic changes associated with surface and coastal erosion have occurred. Gully erosion has removed 300,000 to 600,000 m3 of mostly fine-grained volcanic sediment from the flanks of the volcano and much of this has reached the ocean. Sediment yield estimates from two representative drainage basins on the south and west flanks of the volcano, with drainage areas of 0.7 and 0.5 km2, are about 104 m3 km-2 yr-1 and are comparable to sediment yields documented at other volcanoes affected by recent eruptive activity. Estimates of the retreat of coastal cliffs also made from analysis of satellite images indicate average annual erosion rates of 80 to 140 m yr-1. If such rates persist it could take 35 years for wave erosion to reach the pre-eruption coastline, which was extended seaward about 400 m by the accumulation of erupted volcanic material. As of 13 September 2009, the date of the most recent satellite image of the island, the total volume of material eroded by wave action was about 106 m3. We did not investigate the distribution of volcanic sediment in the near shore ocean around Kasatochi Island, but it appears that erosion and sediment dispersal in the nearshore environment will be greatest during large storms when the combination of high waves and rainfall runoff are most likely to coincide. ?? 2010 Regents of the University of Colorado.

Arctic, Antarctic, and Alpine Research

Stratigraphic Context of Old Crow Tephra, Holitna Lowland, Interior Southwest Alaska

A thick deposit of Old Crow tephra was discovered in a bluff exposure along the middle Holitna River near the Kulukbuk Hills (61??20???N latitude, 157??10???W longitude) in interior southwest Alaska. This locality is the southwesternmost-known deposit of Old Crow tephra in Alaska. Thickness and grain-size data from this site support a source volcano in the eastern Aleutian arc. Pleistocene stratigraphic sequences in the lowland are dominated by upward-fining eolian sand-sheet deposits and loess separated by organic silt. These deposits record at least two episodes of regional glaciation and an intervening nonglacial period (marine oxygen isotope stage 3, stage 5, or both). Old Crow tephra crops out near the top of the lower upward-fining eolian unit, indicating that the ash erupted near the end of an interval of periglacial eolian sedimentation. The sequence of eolian deposits that contain Old Crow tephra probably accumulated during the latter part of marine oxygen isotope stage 6, whereas the overlying eolian sequence formed during the last glaciation (stage 2). This stratigraphic position is consistent with other stratigraphic contexts for the tephra and with fission-track and thermoluminescence ages of ca. 140,000 ?? 10,000 yr B.P.

Quaternary Research

Numerical simulation of tsunami generation by cold volcanic mass flows at Augustine Volcano, Alaska

Many of the world's active volcanoes are situated on or near coastlines. During eruptions, diverse geophysical mass flows, including pyroclastic flows, debris avalanches, and lahars, can deliver large volumes of unconsolidated debris to the ocean in a short period of time and thereby generate tsunamis. Deposits of both hot and cold volcanic mass flows produced by eruptions of Aleutian arc volcanoes are exposed at many locations along the coastlines of the Bering Sea, North Pacific Ocean, and Cook Inlet, indicating that the flows entered the sea and in some cases may have initiated tsunamis. We evaluate the process of tsunami generation by cold granular subaerial volcanic mass flows using examples from Augustine Volcano in southern Cook Inlet. Augustine Volcano is the most historically active volcano in the Cook Inlet region, and future eruptions, should they lead to debris-avalanche formation and tsunami generation, could be hazardous to some coastal areas. Geological investigations at Augustine Volcano suggest that as many as 12-14 debris avalanches have reached the sea in the last 2000 years, and a debris avalanche emplaced during an A.D. 1883 eruption may have initiated a tsunami that was observed about 80 km east of the volcano at the village of English Bay (Nanwalek) on the coast of the southern Kenai Peninsula. Numerical simulation of mass-flow motion, tsunami generation, propagation, and inundation for Augustine Volcano indicate only modest wave generation by volcanic mass flows and localized wave effects. However, for east-directed mass flows entering Cook Inlet, tsunamis are capable of reaching the more populated coastlines of the southwestern Kenai Peninsula, where maximum water amplitudes of several meters are possible.

Natural Hazards and Earth System Sciences

Preliminary geologic map of Kanaga Volcano, Alaska

Kanaga Volcano is a 1,300 m (4,287-foot) high, historically active cone-shaped stratovolcano located on the north end of Kanaga Island in the Andreanof Islands Group of the Aleutian Islands. The volcano is undissected, symmetrical in profile, and is characterized by blocky andesitic lava flows, with well-developed levees and steep flow fronts, that emanate radially from, or near, the 200-m-wide summit crater. The lack of dissection of the cone suggests the entire edifice was constructed in post-glacial Holocene time. Historical eruptions were reported in 1791, 1827, 1829, 1904-1906, and 1993-95 (Miller and others, 1998); questionable eruptions occurred in 1763, 1768, 1786, 1790, and 1933. The upper flanks of the cone are very steep (>30°) and flows moving down these steep flows commonly fragment into breccias and lahars. A non-vegetated lahar, or group of lahars, extends from high on the southeast flank of the cone down to the northeast shore of the intracaldera lake. This lahar deposit was observed in 1999 but does not appear to be present on aerial photos taken in 1974 and is assumed to be part of the 1994-95 eruption. Most recent eruptions of Kanag a, including the 1994-95 eruption, were primarily effusive in character with a subordinate explosive component. Lava was extruded from, or near, the summit vent and moved down the flank of the cone in some cases reaching the ocean. In 1994, lava flows going down the very steep north and west flanks broke up into incandescent avalanches tumbling over steep truncated sea cliffs into the Bering Sea. A common feature of Kanaga central vent eruptions is the occurrence of widespread ballistics and accompanying craters. Steam and fine ash plumes rose to 7.5 km ASL and drifted a few tens of kilometers downwind. Plumes such as these are unlikely to deposit significant (i.e., sufficiently thick to leave a permanent record) tephras on other islands downwind.

Alaska

Theoretical analysis of tsunami generation by pyroclastic flows

Pyroclastic flows are a common product of explosive volcanism and have the potential to initiate tsunamis whenever thick, dense flows encounter bodies of water. We evaluate the process of tsunami generation by pyroclastic flow by decomposing the pyroclastic flow into two components, the dense underflow portion, which we term the pyroclastic debris flow, and the plume, which includes the surge and coignimbrite ash cloud parts of the flow. We consider five possible wave generation mechanisms. These mechanisms consist of steam explosion, pyroclastic debris flow, plume pressure, plume shear, and pressure impulse wave generation. Our theoretical analysis of tsunami generation by these mechanisms provides an estimate of tsunami features such as a characteristic wave amplitude and wavelength. We find that in most situations, tsunami generation is dominated by the pyroclastic debris flow component of a pyroclastic flow. This work presents information sufficient to construct tsunami sources for an arbitrary pyroclastic flow interacting with most bodies of water. Copyright 2003 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth

Numerical simulation of tsunami generation by pryoclastic flow at Aniakchak Volcano, Alaska

Pyroclastic flows entering the sea are plausible mechanisms for tsunami generation at volcanic island arcs worldwide. We evaluate tsunami generation by pyroclastic flow using an example from Aniakchak volcano in Alaska where evidence for tsunami inundation coincident with a major, caldera-forming eruption of the volcano ca. 3.5 ka has been described. Using a numerical model, we simulate the tsunami and compare the results to field estimates of tsunami run up.

Geophysical Research Letters

Flank collapse at Mount Wrangell, Alaska, recorded by volcanic mass-flow deposits in the Copper River lowland

An areally extensive volcanic mass-flow deposit of Pleistocene age, known as the Chetaslina volcanic mass-flow deposit, is a prominent and visually striking deposit in the southeastern Copper River lowland of south-central Alaska. The mass-flow deposit consists of a diverse mixture of colorful, variably altered volcanic rocks, lahar deposits, glaciolacustrine diamicton, and till that record a major flank collapse on the southwest flank of Mount Wrangell. The deposit is well exposed near its presumed source, and thick, continuous, stratigraphic exposures have permitted us to study its sedimentary characteristics as a means of better understanding the origin, significance, and evolution of the deposit. Deposits of the Chetaslina volcanic mass flow in the Chetaslina River drainage are primary debris-avalanche deposits and consist of two principal facies types, a near-source block facies and a distal mixed facies. The block facies is composed entirely of block-supported, shattered and fractured blocks with individual blocks up to 40 m in diameter. The mixed facies consists of block-sized particles in a matrix of poorly sorted rock rubble, sand, and silt generated by the comminution of larger blocks. Deposits of the Chetaslina volcanic mass flow exposed along the Copper, Tonsina, and Chitina rivers are debris-flow deposits that evolved from the debris-avalanche component of the flow and from erosion and entrainment of local glacial and glaciolacustrine diamicton in the Copper River lowland. The debris-flow deposits were probably generated through mixing of the distal debris avalanche with the ancestral Copper River, or through breaching of a debris-avalanche dam across the ancestral river. The distribution of facies types and major-element chemistry of clasts in the deposit indicate that its source was an ancestral volcanic edifice, informally known as the Chetaslina vent, on the southwest side of Mount Wrangell. A major sector collapse of the Chetaslina vent initiated the Chetaslina volcanic mass flow forming a debris avalanche of about 4 km3 that subsequently transformed to a debris flow of unknown volume.

Canadian Journal of Earth Sciences

Formation and failure of volcanic debris dams in the Chakachatna River valley associated with eruptions of the Spurr volcanic complex, Alaska

The formation of lahars and a debris avalanche during Holocene eruptions of the Spurr volcanic complex in south-central Alaska have led to the development of volcanic debris dams in the Chakachatna River valley. Debris dams composed of lahar and debris-avalanche deposits formed at least five times in the last 8000-10,000 years and most recently during eruptions of Crater Peak vent in 1953 and 1992. Water impounded by a large debris avalanche of early Holocene (?) age may have destabilized an upstream glacier-dammed lake causing a catastrophic flood on the Chakachatna River. A large alluvial fan just downstream of the debris-avalanche deposit is strewn with boulders and blocks and is probably the deposit generated by this flood. Application of a physically based dam-break model yields estimates of peak discharge (Qp) attained during failure of the debris-avalanche dam in the range 104 < Qp < 106 m3 s-1 for plausible breach erosion rates of 10-100 m h-1. Smaller, short-lived, lahar dams that formed during historical eruptions in 1953, and 1992, impounded smaller lakes in the upper Chakachatna River valley and peak flows attained during failure of these volcanic debris dams were in the range 103 < Qp < 104 m3 s-1 for plausible breach erosion rates. Volcanic debris dams have formed at other volcanoes in the Cook Inlet region, Aleutian arc, and Wrangell Mountains but apparently did not fail rapidly or result in large or catastrophic outflows. Steep valley topography and frequent eruptions at volcanoes in this region make for significant hazards associated with the formation and failure of volcanic debris dams. Published by Elsevier Science B.V.

Geomorphology

Record of late holocene debris avalanches and lahars at Iliamna Volcano, Alaska

Iliamna Volcano is a 3053-meter high, glaciated stratovolcano in the southern Cook Inlet region of Alaska and is one of seven volcanoes in this region that have erupted multiple times during the past 10,000 yr. Prior to our studies of Iliamna Volcano, little was known about the frequency, magnitude, and character of Holocene volcanic activity. Here we present geologic evidence of the most recent eruptive activity of the volcano and provide the first outline of Late Holocene debris-avalanche and lahar formation. Iliamna has had no documented historical eruptions but our recent field investigations indicate that the volcano has erupted at least twice in the last 300 yr. Clay-rich lahar deposits dated by radiocarbon to ???1300 and ???90 yr BP are present in two major valleys that head on the volcano. These deposits indicate that at least two large, possibly deep-seated, flank failures of the volcanic edifice have occurred in the last 1300 yr. Noncohesive lahar deposits likely associated with explosive pyroclastic eruptions date to 2400-1300,>1500,???300, and <305 yr BP. Debris-avalanche deposits from recent and historical small-volume slope failures of the hydrothermally altered volcanic edifice cover most of the major glaciers on the volcano. Although these deposits consist almost entirely of hydrothermally altered rock debris and snow and ice, none of the recently generated debris avalanches evolved to lahars. A clay-rich lahar deposit that formed <90??60 radiocarbon yr BP and entered the Johnson River Valley southeast of the volcano cannot be confidently related to an eruption of Iliamna Volcano, which has had no known historical eruptions. This deposit may record an unheralded debris avalanche and lahar. ?? 2000 Elsevier Science B.V. All rights reserved.

Journal of Volcanology and Geothermal Research

Reevaluation of tsunami formation by debris avalanche at Augustine Volcano, Alaska

Debris avalanches entering the sea at Augustine Volcano, Alaska have been proposed as a mechanism for generating tsunamis. Historical accounts of the 1883 eruption of the volcano describe 6- to 9-meter-high waves that struck the coastline at English Bay (Nanwalek), Alaska about 80 kilometers east of Augustine Island. These accounts are often cited as proof that volcanigenic tsunamis from Augustine Volcano are significant hazards to the coastal zone of lower Cook Inlet. This claim is disputed because deposits of unequivocal tsunami origin are not evident at more than 50 sites along the lower Cook Inlet coastline where they might be preserved. Shallow water (<25 m) around Augustine Island, in the run-out zone for debris avalanches, limits the size of an avalanche-caused wave. If the two most recent debris avalanches, Burr Point (A.D. 1883) and West Island (<500 yr. B.P.) were traveling at velocities in the range of 50 to 100 meters per second, the kinetic energy of the avalanches at the point of impact with the ocean would have been between 1014 and 1015 joules. Although some of this energy would be dissipated through boundary interactions and momentum transfer between the avalanche and the sea, the initial wave should have possessed sufficient kinetic energy to do geomorphic work (erosion, sediment transport, formation of wave-cut features) on the coastline of lowwer Cook Inlet. Because widespread evidence of the effects of large waves cannot be found, it appears that the debris avalanches could not have been traveling very fast when they entered the sea, or they happened during low tide and displaced only small volumes of water. In light of these results, the hazard from volcanigenic tsunamis from Augustine Volcano appears minor, unless a very large debris avalanche occurs at high tide.

Pure and Applied Geophysics

Stratigraphic framework of Holocene volcaniclastic deposits, Akutan Volcano, east-central Aleutian Islands, Alaska

Akutan Volcano is one of the most active volcanoes in the Aleutian arc, but until recently little was known about its history and eruptive character. Following a brief but sustained period of intense seismic activity in March 1996, the Alaska Volcano Observatory began investigating the geology of the volcano and evaluating potential volcanic hazards that could affect residents of Akutan Island. During these studies new information was obtained about the Holocene eruptive history of the volcano on the basis of stratigraphic studies of volcaniclastic deposits and radiocarbon dating of associated buried soils and peat. A black, scoria-bearing, lapilli tephra, informally named the 'Akutan tephra,' is up to 2 m thick and is found over most of the island, primarily east of the volcano summit. Six radiocarbon ages on the humic fraction of soil A-horizons beneath the tephra indicate that the Akutan tephra was erupted approximately 1611 years B.P. At several locations the Akutan tephra is within a conformable stratigraphic sequence of pyroclastic-flow and lahar deposits that are all part of the same eruptive sequence. The thickness, widespread distribution, and conformable stratigraphic association with overlying pyroclastic-flow and lahar deposits indicate that the Akutan tephra likely records a major eruption of Akutan Volcano that may have formed the present summit caldera. Noncohesive lahar and pyroclastic-flow deposits that predate the Akutan tephra occur in the major valleys that head on the volcano and are evidence for six to eight earlier Holocene eruptions. These eruptions were strombolian to subplinian events that generated limited amounts of tephra and small pyroclastic flows that extended only a few kilometers from the vent. The pyroclastic flows melted snow and ice on the volcano flanks and formed lahars that traveled several kilometers down broad, formerly glaciated valleys, reaching the coast as thin, watery, hyperconcentrated flows or water floods. Slightly cohesive lahars in Hot Springs valley and Long valley could have formed from minor flank collapses of hydrothermally altered volcanic bedrock. These lahars may be unrelated to eruptive activity.

Bulletin of Volcanology

A catastrophic flood caused by drainage of a caldera lake at Aniakchak Volcano, Alaska, and implications for volcanic hazards assessment

Aniakchak caldera, located on the Alaska Peninsula of southwest Alaska, formerly contained a large lake (estimated volume 3.7 × 10 9 m 3 ) that rapidly drained as a result of failure of the caldera rim sometime after ca. 3400 yr B.P. The peak discharge of the resulting flood was estimated using three methods: (1) flow-competence equations, (2) step-backwater modeling, and (3) a dam-break model. The results of the dam-break model indicate that the peak discharge at the breach in the caldera rim was at least 7.7 × 10 4 m 3 s −1 , and the maximum possible discharge was ≈1.1 × 10 6 m 3 s −1 . Flow-competence estimates of discharge, based on the largest boulders transported by the flood, indicate that the peak discharge values, which were a few kilometers downstream of the breach, ranged from 6.4 × 10 5 to 4.8 × 10 6 m 3 s −1 . Similar but less variable results were obtained by step-backwater modeling. Finally, discharge estimates based on regression equations relating peak discharge to the volume and depth of the impounded water, although limited by constraining assumptions, provide results within the range of values determined by the other methods. The discovery and documentation of a flood, caused by the failure of the caldera rim at Aniakchak caldera, underscore the significance and associated hydrologic hazards of potential large floods at other lake-filled calderas.

Geological Society of America Bulletin

Flood geomorphology of Arthurs Rock Gulch, Colorado: paleoflood history

Episodic late Quaternary flooding is recorded by bouldery deposits and slackwater sediments along Arthurs Rock Gulch, an ephemeral stream west of Fort Collins, Colorado. Flood deposits consist of individual granodiorite and pegmatite boulders, boulder bars, and coarse overbank sediment that rest on erosional terrace segments along the channel. We identified evidence for at least five flood in the lower two thirds of the 1.84 km 2 drainage basin. Flood deposits are differentiated by their position above the active channel, weathering characteristics, degree of boulder burial by colluvium, amount of lichen cover, and position with respect to terrace and colluvial deposits. Age estimates for the flood deposits are based on radiocarbon dating, tree-ring analyses, and relative-age criteria from four sites in the basin. At least two floods occurred in the last 300 years; a third flood is at least 5000 years old, but likely younger than 10,000 yr BP; and the two oldest floods occurred at least 40,000 years BP.

Geomorphology

Overview of environmental and hydrogeologic conditions at King Salmon, Alaska

The Federal Aviation Administration is conducting preliminary environmental assessments at most of its present or former facilities in Alaska. Information about environmental conditions at King Salmon, Alaska are presented in this report. This report gives an overview of the geology, hydro- logy, and climate of the King Salmon area and describes general geohydrologic conditions. A thick alluvial aquifer underlies King Salmon and both ground water and surface water are plentiful in the area.

Open-File Report

Sediment yield and spurious correlation-toward a better portrayal of the annual suspendend-sediment load of rivers

Bivariate relations between annual sediment yield (tons per year per unit drainage area) and drainage-basin area are spurious because drainage-basin area is common to both axes. Two alternative methods for portraying the annual suspended-sediment load of a river are suggested. One method consists of plotting suspended-sediment load (tons per year) against distance downstream. Such plots indicate that annual suspended-sediment load does not necessarily have a linear relationship with distance. The second method consists of plotting annual suspended-sediment load against drainage-basin area. Both methods more accurately portray fundamental relations between annual sediment load and drainage-basin characteristics than does the yield-area relation because spurious correlation is avoided. Plots were made of annual suspended-sediment load versus time for several stations along each of eight rivers for the 10–15 years of available data. The plots are in-phase with respect to relative magnitude of annual sediment loads.

Geomorphology