Geology topics

C. A. Gent

Publications and source records attributed to C. A. Gent.

18 recordsLinked to original sources

USGS2004

Using the geologic setting of talc deposits as an indicator of amphibole asbestos content

This study examined commercial talc deposits in the U.S. and their amphibole-asbestos content. The study found that the talc-forming environment directly influenced the amphibole and amphibole-asbestos content of the talc deposit. Large talc districts in the U.S. have mined hydrothermal talcs that replaced dolostone. Hydrothermal talcs, created by siliceous fluids heated by magmas at depth, consistently lack amphiboles as accessory minerals. In contrast, mineable talc deposits that formed by contact or regional metamorphism consistently contain amphiboles, locally as asbestiform varieties. Examples of contact metamorphic deposits occur in Death Valley, California; these talc-tremolite deposits contain accessory amphibole-asbestos. Talc bodies formed by regional metamorphism always contain amphiboles, which display a variety of compositions and habits, including asbestiform. Some industrial mineral deposits are under scrutiny as potential sources of accessory asbestos minerals. Recognizing consistent relations between the talc-forming environment and amphibole-asbestos content may be used in prioritizing remediation or monitoring of abandoned and active talc mines.

Environmental Geology↗

USGS2002

Biogeochemical and biochemical pathway investigations of cadmium in subarctic ecosystems using a cadmium accumulator species (willow)

This study focuses on a portion of the Fortymile River and Goodpaster River watersheds (fig. 1) in the Eagle and Big Delta 1:250,000-scale quadrangles, respectively.

Alaska↗

USGS1996

Paragenetic and minor- and trace-element studies of Mississippi Valley-type ore deposits of the Silesian-Cracow district, Poland

Paragenetic and minor- and trace-element studies were conducted on samples of epigenetic ore and gangue minerals collected from mines and drill core in the Silesian-Cracow (S-C) district of southern Poland. Four discrete mineral suites representing four mineralizing stages can be identified throughout the district. The earliest epigenetic minerals deposited during stage 1 consist of a late dolomite cement together with minor pyrite and marcasite. Stage 2 was the first ore-forming stage and included repetitive deposition of sphalerite and galena in a variety of morphologies. Stage 3 abruptly followed the first ore stage and deposited marcasite and pyrite with variable amounts of late sphalerite and galena. In the samples studied, minerals deposited during stage 3 are predominately marcasite-pyrite with minor sphalerite and galena in the Pomorzany and Olkusz mines, whereas, at the Trzebionka mine, stage 3 mineralization deposited mostly galena and sphalerite with little marcasite or pyrite. Stage 4 minerals include contains barite, followed by calcite, with very minor pyrite and a rare, late granular sphalerite. Compared to other major Mississippi Valley-type (MVT) districts of the world, the Silesian-Cracow district contains sphalerite with the second largest range in Ag concentrations and the largest range in Fe and Cd concentrations of any district. Unlike in other districts, very wide ranges in minor- and trace-element concentrations are also observed in paragenetically equivalent samples collected throughout the district. This wide range indicates that the minor- and trace-element content of the ore-forming environment was highly variable, both spatially and temporally, and suggests that the hydrologic system that the ore fluids traversed from their basinal source was very complex. Throughout the district, a significant increase in Tl, Ge, and As concentrations is accompanied by a lightening of sulfur isotopes between stage 2 and stage 3 minerals. This change appears to record a major district-scale hydrologic event that probably reflects the introduction of fluids with significantly different geochemistry than that of earlier ore-forming fluids.

Prace - Panstwowego Instytutu Geologicznego↗

USGS1996

Lead-isotopic, sulphur-isotopic, and trace-element studies of galena from the Silesian-Cracow Zn-Pb ores, polymetallic veins from the Gory Swietokrzyskie MTS, and the Myszkow porphyry copper deposit, Poland

Lead-isotopic data on galena samples collected from a paragenetically constrained suite of samples from the Silesian-Cracow ore district show no regional or paragenetically controlled lead-isotopic trends within the analytical reproducibility of the measurements. Furthermore, the new lead-isotopic data agree with previously reported lead-isotopic results (R. E. Zartman et al., 1979). Sulfur-isotopic analyses of ores from the Silesian-Cracow district as well as from vein ore from the Gory Swietokrzyskie Mts. and the Myszkow porphyry copper deposit, when coupled with trace-element data from the galena samples, clearly discriminate different hydrothermal ore-forming events. Lead-isotopic data from the Permian and Miocene evaporite deposits in Poland indicate that neither of these evaporite deposits were a source of metals for the Silesian-Cracow district ores. Furthermore, lead-isotopic data from these evaporite deposits and the shale residues from the Miocene halite samples indicate that the crustal evolution of lead in the central and western European platform in southern Poland followed normal crustal lead-isotopic growth, and that the isotopic composition of crustal lead had progressed beyond the lead-isotopic composition of lead in the Silesian-Cracow ores by Permian time. Thus, Mesozoic and Tertiary sedimentary flysch rocks can be eliminated as viable source rocks for the metals in the Silesian-Cracow Mississippi Valley-type (MVT) deposits. The uniformity of the isotopic composition of lead in the Silesian-Cracow ores, when coupled with the geologic evidence that mineralization must post-date Late Jurassic faulting (E. Gorecka, 1991), constrains the geochemical nature of the source region. The source of the metals is probably a well-mixed, multi-cycle molasse sequence of sedimentary rocks that contains little if any Precambrian metamorphic or granitic clasts (S. E. Church, R. B. Vaughn, 1992). If ore deposition was post Late Jurassic (about 150 m. y.) or later as indicated by the geologic evidence, the source rocks probably contained elevated concentrations of Zn and Pb (75-100 ppm), and relatively low concentrations of U and Th (2 and 8 ppm or less, respectively). The Carboniferous coal-bearing molasse rocks of the Upper Silesian Coal Basin are a prime candidate for such a source region. The presence of ammonia and acetate in the fluid inclusions (Viets et al., 1996a) also indicate that the Carboniferous coal-bearing molasse sequence in the Upper Silesian Coal Basin may have been a suitable pathway for the MVT ore fluids. The lead-isotopic homogeneity, when coupled with the sulfur-isotopic heterogeneity of the ores suggests that mixing of a single metal-bearing fluid with waters from separate aquifers containing variable sulfur-isotopic compositions in karsts in the Muschelkalk Formation of Middle Triassic age may have been responsible for the precipitation of the ores of the Silesian-Cracow district.

Prace - Panstwowego Instytutu Geologicznego↗

USGS1996

Sulfur isotope geochemistry of ore and gangue minerals from the Silesian-Cracow Mississippi Valley-type ore district, Poland

Studies of the sulfur isotopic composition of ore and gangue minerals from the Silesian-Cracow Zn-Pb district were conducted to gain insights into processes that controlled the location and distribution of the ore deposits. Results of this study show that minerals from the Silesian-Cracow ore district have the largest range of sulfur isotope compositions in sulfides observed from any Mississippi Valley-type ore district in the world. The ??34S values for sulfide minerals range from +38 to -32 per mil for the entire paragenetic sequence but individual stages exhibit smaller ranges. There is a well developed correlation between the sulfur isotope composition and paragenetic stage of ore deposition. The first important ore stage contains mostly positive ??34S values, around 5 per mil. The second stage of ore formation are lower, with a median value of around -5 to -15 per mil, and with some values as low as -32 per mil. Late stage barite contains isotopically heavy sulfur around +32 per mil. The range in sulfur isotope compositions can be explained by contributions of sulfur from a variety of source rocks together with sulfur isotope fractionations produced by the reaction paths for sulfate reduction. Much of the variation in sulfur isotope compositions can be explained by bacterial reduction of sedimentary sulfate and disequilibrium reactions by intermediate-valency sulfur species, especially in the late-stage pyrite and sphalerite. Organic reduction of sulfate and thermal release of sulfur from coals in the Upper Silesian Coal Basin may have been important contributors to sulfur in the ore minerals. The sulfur isotopic data, ore mineral textures, and fluid inclusion data, are consistent with the hypothesis that fluid mixing was the dominant ore forming mechanism. The rather distinct lowering of ?? 34S values in sulfides from stage 2 to stage 3 is believed to reflect some fundamental change in the source of reduced sulfur and/or hydrology of the ore-forming environment. A change in the hydrology of the ore forming environment could be accomplished by extensional faulting that was coeval with ore formation. Late stage barite contains high values of ??34S which may reflect the final collapse of the hydrothermal system.

Prace - Panstwowego Instytutu Geologicznego↗

USGS1991

Oxygen, hydrogen, and sulfur isotope studies in the Juneau gold belt, southeastern Alaska: Constraints on the origin of hydrothermal fluids

The delta 18 O values of gold-bearing quartz from the Juneau gold belt range from 15.2 to 20.8 per mil, indicating that ore fluid values ranged from 7.2 to 12.8 per mil at an estimated temperature of 300 degrees C. Hydrothermal micas from many of the deposits are characterized by delta D values of -75 to -53 per mil, and ore fluids were calculated to have values of -35 to -15 per mil. In contrast, extracted fluid inclusion waters have a broad range of delta D values, from -48 in relatively undeformed quartz to about -110 per mil for some of the more deformed quartz veins. This range of more than 60 per mil reflects various mixtures from inclusions containing isotopically heavy, primary ore fluids and those containing low-temperature, isotopically light meteoric waters that were trapped in late fractures during uplift of the veins to shallow crustal levels. These results indicate a deep crustal source for the ore fluids, most likely of metamorphic origin. Values of delta D for muscovite, biotite, and hornblende from country rocks, as well as of delta 18 O for quartz-feldspar and quartz-plagioclase, provide little evidence of deep circulation of meteoric water along the length of the gold belt.The provinciality of delta 34 data suggests a regional metamorphic fluid of approximately -6 per mil that acquired much of its sulfur from lithologies near sites of ore deposition. Sulfur ratios of sulfide minerals from auriferous quartz range from -17.8 to -5.6 per mil in black phyllite hosts, from -6.0 to -1.3 per mil in less reduced metasedimentary rocks, and from -3.8 to +1.2 per mil in relatively oxidized igneous rocks. The regional fluid is interpreted to have driven desulfidation reactions in relatively 34 S-depleted sulfur reservoirs in the phyllites and 34 S-enriched reservoirs in the more oxidized lithologies.

Economic Geology↗

USGS1990