Geology topics

Brian D. Rodriguez

Publications and source records attributed to Brian D. Rodriguez.

At least 19 recordsLinked to original sources

USGS2025

Aeromagnetic and magnetotelluric imaging of west-central Idaho and the Stibnite-Yellow Pine mining district: A regional to district perspective

Aeromagnetic and magnetotelluric (MT) data are used to better understand the geology and mineral resources near the Stibnite-Yellow Pine mining district in central Idaho. The reduced-to-pole (RTP) transformation of regional-scale aeromagnetic data shows that allochthonous island-arc rocks west of the Salmon River suture are significantly more magnetic than the Laurentian continental rocks east of the suture and that the granitoids of the Idaho batholith have moderate to low magnetization in both early, metaluminous, and late, peraluminous phases. Application of tilt derivative to aeromagnetic data highlights major crustal-scale structures. The 5-km upward continued magnetic data indicate island-arc rocks have deep magnetic sources. The 110-km-long MT profile images resistivity structure to depths around 30 km. At shallow depths, resistivity corresponds to mapped geologic units, with moderate resistivities underlying volcanic and roof-pendant metasedimentary rocks and moderate to high resistivities occurring beneath the Idaho batholith. Crustal-scale moderate resistivities beneath the suture image the results of tectonomagmatic processes that accompanied suturing and translating allochthonous terranes. Low resistivity values beneath and fringing the batholith are derived from metasedimentary rocks that may have served as a melt source and reductant during melt generation and provided metals during later ore formation. In the Stibnite-Yellow Pine mining district, a high-resolution aeromagnetic compilation is shown to correlate with mapped lithologies and mineral deposit-related structures. The RTP transform distinguishes magnetic and nonmagnetic granitoid phases of the Idaho batholith. The tilt derivative highlights metasedimentary rocks, some of which are favorable ore hosts. The Meadow Creek fault hosts the Stibnite and Hangar Flats deposits and is imaged as a magnetic low due to hydrothermal alteration. Reconstructions of magnetic anomaly offsets and orebodies indicate around 3 km of post-95 Ma dextral separation, with some or all of the offset inferred to postdate the main Au mineralization episode (61–66 Ma).

Idaho↗

USGS2024

Deep resistivity geophysics of the San Juan–Silverton caldera complex, San Juan County, Colorado (USA)

Magnetotelluric (MT) and audiomagnetotelluric (AMT) data are used to better understand the subsurface geology and mineral resources in the San Juan–Silverton caldera complex located near Silverton, Colorado, western United States, as part of the extensive southern Rocky Mountains volcanic field that covers much of southwestern Colorado and northern New Mexico. Seven MT and AMT profiles of varying lengths image resistivity structure to depths of ~5 km. The AMT inversion models characterize geophysical responses of near-surface lithologies, structures, and mineralized systems and also help corroborate airborne electromagnetic data at shallow levels. The MT inversion models extend our depth of investigation from near the surface to great depths (~5 km) and help to form hypotheses about roots of the hydrothermal plumbing that fed shallower mineralized systems. Subsurface high resistivities occur beneath intermediate-composition lava flows and Proterozoic units. Subsurface moderate- to low-resistivity values may reflect hydrothermal plumbing that served as flow paths for mineralizing fluids and metallic ore formation. The model interpretations presented in this study could be utilized in remediation planning or mineral resource applications. The methods used could be applied to other watersheds with similar volcanic environments containing acid-generating historical mines or hydrothermally altered and mineralized source rocks.

Colorado↗

USGS2023

Geophysical data provide three dimensional insights into porphyry copper systems in the Silverton caldera, Colorado, USA

The Silverton caldera in southwest Colorado, USA hosts polymetallic veins and pervasively altered rocks indicative of porphyry copper systems. Nearly a kilometer of erosion has exposed multiple levels of the hydrothermal systems from shallow lithocaps down to quartz-sericite-pyrite veins. New airborne electromagnetic and magnetic survey data are integrated with previous alteration mapping and porphyry models to show the subsurface geophysical response of shallow to deep levels of the porphyry system. Qualitative map views show lateral changes in the magnetization and resistivity of the hydrothermally altered rocks. The volcanic terrain exhibits high magnetization and high amplitude anomalies map near-surface plutonic rocks associated with porphyry systems. Magnetic susceptibility measurements on outcrops of hydrothermally altered rocks indicate magnetite content decreases upward and outward from the source intrusions where magnetic anomaly lows are observed over the lithocaps. The resistivity maps highlight hydrothermal alteration as resistivity lows with exception being rocks having propylitic alteration. Quantitative resistivity models show low resistivity zones with an apparent thickness around 50–150 m beneath quartz-sericite-pyrite veins interpreted to be the result of supergene processes that may continue today, and the calculated magnetic source depths occur near the top of this zone. The resistivity models also show rocks having propylitic, silicic, and quartz-alunite-pyrophyllite assemblages exhibit high resistivity with depth, and argillic alteration assemblages had high resistivity due to high quartz content. This integrated approach presented in a three-dimensional environment provides guidance when exploring for porphyry copper systems in less exposed terrains.

Colorado↗

USGS2019

Geological and geophysical data for a three-dimensional view—Inside the San Juan and Silverton Calderas, Southern Rocky Mountains Volcanic Field, Silverton, Colorado

Introduction The San Juan-Silverton caldera complex located near Silverton, Colorado, in the Southern Rocky Mountains volcanic field is an ideal natural laboratory for furthering the understanding of shallow-to-deep volcanic-related mineral systems. Recent advances in geophysical data processing and three-dimensional (3D) model construction will help to characterize shallow properties important for understanding surface water and groundwater quality issues and will also improve knowledge of deep geological structures that may have been conduits for hydrothermal fluids that formed mineral deposits. The study has general applications to mineral resource assessments in other areas of the world and to identifying possible groundwater flow paths and associated geochemistry important in abandoned mine lands cleanup. Silverton, Colorado, is the site of a spectacular succession of igneous rocks that formed beginning about 35 million years ago (Ma). Base metals (copper, lead, and zinc) and precious metals (silver and gold) mined from the late 1870s to 1991 owe their existence to a 25-million-year cycle of igneous activity. The presence of economic, base, and precious metal deposits within a complex geological setting were largely responsible for stimulating studies by the U.S. Geological Survey (USGS) conducted during the early 20th century. The focus of investigations in the late 20th and 21st centuries have broadened in scope to include abandoned mine lands (AML) investigations. The legacy of hard rock mining in headwater catchment areas caused environmental challenges for local communities and downstream water resource users. The Gold King Mine, located a few kilometers north of Silverton, illustrates the potential environmental effects of abandoned mines. On August 5, 2015, during reclamation efforts at the Gold King Mine, a breach of collapsed workings sent approximately 3 million gallons of acidic and metal-rich mine water into the upper Animas River, a tributary to the Colorado River Basin. Mining-related sources of metals and acidity add to geological sources of metals in surface water and groundwater. Weathering processes of altered and mineralized rock have been a source of acid rock drainage that have been ongoing for millennia.

Colorado↗

USGS2019

A shallow rift basin segmented in space and time: The southern San Luis Basin, Rio Grande rift, northern New Mexico, U.S.A.

Interpretation of gravity, magnetotelluric, and aeromagnetic data in conjunction with geologic constraints reveals details of basin geometry, thickness, and spatiotemporal evolution of the southern San Luis Basin, one of the major basins of the northern Rio Grande rift. Spatial variations of low-density basin-fill thickness are estimated primarily using a 3D gravity inversion method that improves on previous modeling efforts by separating the effects of the low-density basin fill from the effects of pre-rift rocks. The basin is found to be significantly narrower—and more complex in the subsurface—than indicated or implied by previous modeling efforts. The basin is also estimated to be significantly shallower than previously estimated. Five distinct subbasins are recognized within the broader southern San Luis Basin. The oldest and shallowest subbasin is the Las Mesitas graben along the northwestern basin margin, formed during the Oligocene transition from Southern Rocky Mountain volcanic field magmatism to rifting. In this subbasin, sediments are estimated to reach a maximum thickness of ~400 m within a north–south elongated structural depression. Other subbasins that likely initially developed during the Miocene are the dominant tectonic features in the southern San Luis Basin. This includes the Tres Orejas subbasin, which formed in the southwestern portion of the basin by the Embudo fault zone and a hypothesized fault zone along its western margin. This subbasin reaches a maximum thickness of ~2 km, as indicated by magnetotelluric and gravity modeling. The Sunshine Valley, Questa, and Taos subbasins occupy the eastern part of the southern San Luis Basin. The southern Sangre de Cristo fault zone is the dominant tectonic feature that controlled their development after ~20 Ma. The east-down Gorge fault zone controlled the western margins of significant parts of these eastern subbasins, although much of the Taos subbasin may be superimposed on the Tres Orejas subbasin. Maximum low-density basin-fill thicknesses are estimated to be 1.2 km for the Sunshine Valley subbasin, 800 m for the Questa subbasin, and 1.8 km for the Taos subbasin. Subbasin-forming tectonic activity along the Gorge fault zone and within the Tres Orejas subbasin ceased by the end of the development of the largely Pliocene Taos Plateau volcanic field. After that, rift-related subsidence became more narrowly centered on the eastern margin of the basin, controlled mainly by the linked Embudo and southern Sangre de Cristo fault zones.

New Mexico↗

USGS2017

Semiautomatic approaches to account for 3-D distortion of the electric field from local, near-surface structures in 3-D resistivity inversions of 3-D regional magnetotelluric data

This report summarizes the results of three-dimensional (3-D) resistivity inversion simulations that were performed to account for local 3-D distortion of the electric field in the presence of 3-D regional structure, without any a priori information on the actual 3-D distribution of the known subsurface geology. The methodology used a 3-D geologic model to create a 3-D resistivity forward (“known”) model that depicted the subsurface resistivity structure expected for the input geologic configuration. The calculated magnetotelluric response of the modeled resistivity structure was assumed to represent observed magnetotelluric data and was subsequently used as input into a 3-D resistivity inverse model that used an iterative 3-D algorithm to estimate 3-D distortions without any a priori geologic information. A publicly available inversion code, WSINV3DMT, was used for all of the simulated inversions, initially using the default parameters, and subsequently using adjusted inversion parameters. A semiautomatic approach of accounting for the static shift using various selections of the highest frequencies and initial models was also tested. The resulting 3-D resistivity inversion simulation was compared to the “known” model and the results evaluated. The inversion approach that produced the lowest misfit to the various local 3-D distortions was an inversion that employed an initial model volume resistivity that was nearest to the maximum resistivities in the near-surface layer.

Open-File Report↗

USGS2015

Magnetotelluric data collected to characterize aquifers in the San Luis Basin, New Mexico

The U.S. Geological Survey is conducting a series of multidisciplinary studies of the San Luis Basin as part of the Geologic Framework of Rio Grande Basins project. Detailed geologic mapping, high-resolution airborne magnetic surveys, gravity surveys, magnetotelluric surveys, and hydrologic and lithologic data are being used to better understand the aquifers in the San Luis Basin. This report describes one north-south and two east-west regional magnetotelluric sounding profiles, acquired in June of 2010 and July and August of 2011, across the San Luis Basin in northern New Mexico. No interpretation of the data is included.

New Mexico↗

USGS2015

Obtaining valid geologic models from 3-D resistivity inversion of magnetotelluric data at Pahute Mesa, Nevada

We summarize the results of a three-dimensional (3-D) resistivity inversion simulation that we conducted with the intent of characterizing the subsurface 3-D distribution of volcanic composite units of Pahute Mesa, Nevada, without any a priori information on the actual 3-D distribution of the known subsurface geology. The 3-D methodology involved using a 3-D geologic model based on drillhole data and average electrical resistivities of the key hydrostratigraphic units at Pahute Mesa to create a 3-D resistivity forward (“known”) model that depicted the subsurface resistivity structure expected for the input geologic configuration. The calculated magnetotelluric response of the modeled resistivity structure was then assumed to represent observed magnetotelluric data and was used as input into a 3-D resistivity inverse model that was allowed to iteratively estimate in 3-D without any a priori geologic information, in particular, the thickness and resistivity of the volcanic composite units. The resulting 3-D resistivity inversion simulation was compared to the “known” model and the results evaluated. The 3-D inversion was generally able to reproduce the gross resistivity structure of the “known” model, but the simulated conductive volcanic composite unit horizons were often too shallow when compared to the “known” model. Additionally, the chosen computation parameters such as station spacing appear to have resulted in computational artifacts that are difficult to interpret but could potentially be removed with further refinements of the 3-D resistivity inversion modeling technique.

Nevada↗

USGS2013

Geophysical constraints on Rio Grande rift structure in the central San Luis Basin, Colorado and New Mexico

Interpretation of gravity, aeromagnetic, and magnetotelluric (MT) data reveals patterns of rifting, rift-sediment thicknesses, distribution of pre-rift volcanic and sedimentary rocks, and distribution of syn-rift volcanic rocks in the central San Luis Basin, one of the northernmost major basins that make up the Rio Grande rift. Rift-sediment thicknesses for the central San Luis Basin determined from a three-dimensional gravity inversion indicate that syn-rift Santa Fe Group sediments have a maximum thickness of ~2 km in the Sanchez graben near the eastern margin of the basin along the central Sangre de Cristo fault zone, and reach nearly 1 km within the Monte Vista graben near the western basin margin along the San Juan Mountains. In between, Santa Fe Group thickness is negligible under the San Luis Hills and estimated to reach ~1.1 km under the Costilla Plains (although no independent thickness constraints exist, and a range of thicknesses of 600 m to 2 km is geophysically reasonable). From combined geophysical and geologic considerations, pre-rift, dominantly sedimentary rocks appear to increase in thickness from none in the Sanchez graben on the east to perhaps 800 m under the San Luis Hills on the west. The pre-rift rocks are most likely early Tertiary in age, but the presence of Mesozoic and Paleozoic sedimentary rocks cannot be ruled out. Geophysical data provide new evidence that an isolated exposure of Proterozoic rocks on San Pedro Mesa is rooted in the Precambrian basement. This narrow, north-south–trending basement high has ~2 km of positive relief with respect to the base of the Sanchez graben, and separates the graben from the structural depression beneath the Costilla Plains. A structural high composed of pre-rift rocks, long inferred to extend from under the San Luis Hills to the Taos Plateau, is confirmed and found to be denser than previously believed, with little or no overlying Santa Fe Group sediments. Major faults in the study area are delineated by geophysical data and models; these faults include significant vertical offsets (≥1 km) of Precambrian rocks along the central and southern zones of the Sangre de Cristo fault system. Other faults with similarly large offsets of the Santa Fe Group include a fault bounding the western margin of San Pedro Mesa, and other faults that bound the Monte Vista graben in an area previously assumed to be a simple hinge zone at the western edge of the San Luis Basin. A major north-south–trending structure with expression in gravity and MT data occurs at the boundary between the Costilla Plains and the San Luis Hills structural high. Although it has been interpreted as a down-to-the-east normal fault or fault zone, our modeling suggests that it also is likely related to pre-rift tectonics. Aeromagnetic anomalies over much of the area are interpreted to mainly reflect variations of remanent magnetic polarity and burial depth of the 5.3–3.7 Ma Servilleta Basalt of the Taos Plateau volcanic field. Magnetic-source depth estimates are interpreted to indicate patterns of subsidence following eruption of the basalt, with maximum subsidence in the Sanchez graben.

Colorado, New Mexico↗

USGS2013

Geophysical constraints on Rio Grande rift structure and stratigraphy from magnetotelluric models and borehole resistivity logs, northern New Mexico

Two- and three-dimensional electrical resistivity models derived from the magnetotelluric method were interpreted to provide more accurate hydrogeologic parameters for the Albuquerque and Española Basins. Analysis and interpretation of the resistivity models are aided by regional borehole resistivity data. Examination of the magnetotelluric response of hypothetical stratigraphic cases using resistivity characterizations from the borehole data elucidates two scenarios where the magnetotelluric method provides the strongest constraints. In the first scenario, the magnetotelluric method constrains the thickness of extensive volcanic cover, the underlying thickness of coarser-grained facies of buried Santa Fe Group sediments, and the depth to Precambrian basement or overlying Pennsylvanian limestones. In the second scenario, in the absence of volcanic cover, the magnetotelluric method constrains the thickness of coarser-grained facies of buried Santa Fe Group sediments and the depth to Precambrian basement or overlying Pennsylvanian limestones. Magnetotelluric surveys provide additional constraints on the relative positions of basement rocks and the thicknesses of Paleozoic, Mesozoic, and Tertiary sedimentary rocks in the region of the Albuquerque and Española Basins. The northern extent of a basement high beneath the Cerros del Rio volcanic field is delineated. Our results also reveal that the largest offset of the Hubbell Spring fault zone is located 5 km west of the exposed scarp. By correlating our resistivity models with surface geology and the deeper stratigraphic horizons using deep well log data, we are able to identify which of the resistivity variations in the upper 2 km belong to the upper Santa Fe Group sediment

New Mexico↗

USGS2013

Magnetotelluric survey to locate the Archean-Proterozoic suture zone in the northeastern Great Basin, Nevada, Utah, and Idaho

North-central Nevada contains a large amount of gold in linear belts, the origin of which is not fully understood. During July 2008, September 2009, and August 2010, the U.S. Geological Survey, as part of the Assessment Techniques for Concealed Mineral Resources project, collected twenty-three magnetotelluric soundings along two profiles in Box Elder County, Utah; Elko County, Nevada; and Cassia, Minidoka, and Blaine Counties, Idaho. The main twenty-sounding north-south magnetotelluric profile begins south of Wendover, Nev., but north of the Deep Creek Range. It continues north of Wendover and crosses into Utah, with the north profile terminus in the Snake River Plain, Idaho. A short, three-sounding east-west segment crosses the main north-south profile near the northern terminus of the profile. The magnetotelluric data collected in this study will be used to better constrain the location and strike of the concealed suture zone between the Archean crust and the Paleoproterozoic Mojave province. This report releases the magnetotelluric sounding data that was collected. No interpretation of the data is included.

Idaho;Nevada;Utah↗

USGS2012

Preliminary velocity and resistivity models of the Loma Prieta Earthquake region

A preliminary three-dimensional velocity model of the Loma Prieta epicentral region in the Santa Cruz Mountains of California has been derived using raypaths from aftershocks recorded by the U.S.G.S. seismic network. In addition, a magnetotelluric sounding profile was completed prior to the earthquake and a two-dimensional resistivity model computed. The velocity and resistivity models include a low-resistivity (3–10 ohm-m), low-velocity (3.3–5.8 km/s) wedge of material between the Zayante and San Andreas faults that extends to depths of over 8 km and is interpreted to be largely Tertiary marine sedimentary rocks. A high-resistivity (>1000 ohm-m), high-velocity (6.4–6.7 km/s) zone between the San Andreas and Sargent faults may represent largely mafic intrusive rocks.

California↗

USGS2012

Surface seismic and electrical methods to detect fluids related to faulting

In the absence of drilling, surface-based geophysical methods are necessary to observe fault zones and fault zone physical properties at seismogenic depths. These in situ physical properties can then be used to infer the presence and distribution of fluids along faults, although such observations are by nature indirect and become less exact with greater depth. Multiple observations of a range of such geophysical properties as compressional and shear seismic velocity ( V p and V s ), V p /V5 ratio (related to Poisson's ratio), resistivity and attenuation in and adjacent to fault zones offer the greatest hope of making inferences of the fault zone geometry, fluids in the fault zone, and fluid reservoirs in the surrounding crust. For simple geometries, fault zone guided waves can provide information on fault zone width and velocities for faults of the order of 200 m wide. To address the question of whether a narrow fault zone can be imaged well enough at depths of seismic rupture to infer the presence of anomalously high fluid/rock ratios, we present synthetic seismic tomography and magnetotelluric examples for an ideal case of a narrow fault zone with a simple geometry, large changes in material properties, and numerous earthquakes within the fault zone. A synthetic 0.5-km wide fault zone with 20% velocity reduction is well imaged using local earthquake tomography. When sequential velocity inversions are done, the true fault width is found, even to 9 km depth, although the calculated amplitude of the velocity reduction is lower than the actual amplitude. V p / V s is as well determined as V p . Magnetotelluric imaging of a synthetic fault zone shows that a conductive fault zone can be well imaged within the upper 10 km. Further, a narrow (1 km) very low resistivity (3 ohm m) fault core can be imaged within a broad (5 km) low resistivity (10 ohm m) fault zone, illustrating that regions of a fault containing large quantities of interconnected fluids within a broader, conductive fault zone should be detectable. Thus variations in fluid content and fluid pressure can be inferred from electrical and seismic methods but there will always be uncertainty in these inferences due to the trade-off with other factors, such as intrinsic variations in porosity, mineralogy, and pore geometry. The best approach is combined modeling of varied seismic and electrical data.

Journal of Geophysical Research Solid Earth↗

USGS2012

Constraining the location of the Archean--Proterozoic suture in the Great Basin based on magnetotelluric soundings

It is important to understand whether major mining districts in north-central Nevada are underlain by Archean crust, known to contain major orogenic gold deposits, or, alternatively, by accreted crust of the Paleoproterozoic Mojave province. Determining the location and orientation of the Archean-Proterozoic suture zone between the Archean crust and Mojave province is also critical because it may influence subsequent patterns of sedimentation, deformation, magmatism, and hydrothermal activity. In the Great Basin, the attitude of the suture zone is unknown because it is concealed below cover. A regional magnetotelluric sounding profile along the Utah-Nevada State line reveals a deeply penetrating, broad electrical conductor that may be the Archean-Proterozoic suture zone in the northwest corner of Utah. This major crustal conductor's strike direction is northwest, where it broadens to about 80 km wide below about 3-km depth. These results suggest that the southwestern limit of intact Archean crust in this part of the Great Basin is farther north than previously reported. These results also suggest that the major gold belts in north-central Nevada are located over the Paleoproterozoic Mojave province, and the Archean terrain lies northeast in the northwest corner of Utah. Rifted Archean crust segments south and west of the suture suggest that future mineral exploration northeast of current mineral trends may yield additional gold deposits.

Open-File Report↗

USGS2011

Audiomagnetotelluric data to characterize the Revett-type copper-silver deposits at Rock Creek in the Cabinet Mountains Wilderness, Montana

The Revett-type deposits at Rock Creek are part of the concealed stratabound copper-silver deposits located in the Cabinet Mountains Wilderness of Montana. The U.S. Geological Survey is conducting a series of multidisciplinary studies as part of the Assessment Techniques for Concealed Mineral Resources project. Geologic, geochemical, geophysical, and mineral resources data are being evaluated with existing and new mineral deposit models to predict the possibility and probability of undiscovered deposits in covered terranes. To help characterize the size, resistivity, and depth of the mineral deposit concealed beneath thick overburden, a regional southwest-northeast audiomagnetotelluric sounding profile was acquired. Further studies will attempt to determine if induced polarization parameters can be extracted from the magnetotelluric data to determine the size of the mineralized area. The purpose of this report is to release the audiomagnetotelluric sounding data collected along that southwest-northeast profile. No interpretation of the data is included.

Montana↗

USGS2011

Audiomagnetotelluric data, Taos Plateau Volcanic Field, New Mexico

The U.S. Geological Survey is conducting a series of multidisciplinary studies of the San Luis Basin as part of the Geologic framework of the Rio Grande Basins project. Detailed geologic mapping, high-resolution airborne magnetic surveys, gravity surveys, audiomagnetotelluric surveys, and hydrologic and lithologic data are being used to better understand the aquifers. This report describes a regional east-west audiomagnetotelluric sounding profile acquired in late July 2009 across the Taos Plateau Volcanic Field. No interpretation of the data is included.

New Mexico↗

USGS2010

Magnetotelluric survey to characterize the Sunnyside porphyry copper system in the Patagonia Mountains, Arizona

The Sunnyside porphyry copper system is part of the concealed San Rafael Valley porphyry system located in the Patagonia Mountains of Arizona. The U.S. Geological Survey is conducting a series of multidisciplinary studies as part of the Assessment Techniques for Concealed Mineral Resources project. To help characterize the size and resistivity of the mineralized area beneath overburden, a regional east-west magnetotelluric sounding profile was acquired. This is a data release report of the magnetotelluric sounding data collected along the east-west profile; no interpretation of the data is included.

Open-File Report↗

USGS2010

Magnetotelluric data, Taos Plateau Volcanic Field, New Mexico

The population of the San Luis Basin region of northern New Mexico is growing. Water shortfalls could have serious consequences. Future growth and land management in the region depend on accurate assessment and protection of the region's groundwater resources. An important issue in managing the groundwater resources is a better understanding of the hydrogeology of the Santa Fe Group and the nature of the sedimentary deposits that fill the Rio Grande rift, which contain the principal groundwater aquifers. The shallow unconfined aquifer and the deeper confined Santa Fe Group aquifer in the San Luis Basin are the main sources of municipal water for the region. The U.S. Geological Survey (USGS) is conducting a series of multidisciplinary studies of the San Luis Basin. Detailed geologic mapping, high-resolution airborne magnetic surveys, gravity surveys, an electromagnetic survey called magnetotellurics (MT), and hydrologic and lithologic data are being used to better understand the aquifers. This report describes a regional east-west MT sounding profile acquired in late July 2009 across the Taos Plateau Volcanic Field where drillhole data are sparse. Resistivity modeling of the MT data can be used to help map changes in electrical resistivity with depths that are related to differences in rock types. These various rock types help control the properties of aquifers. The purpose of this report is to release the MT sounding data collected along the east-west profile. No interpretation of the data is included.

Open-File Report↗