Geology topics

Brett J. Valentine

Publications and source records attributed to Brett J. Valentine.

At least 37 records · Page 2Linked to original sources

USGS2020

Characterization of the unconventional Tuscaloosa marine shale reservoir in southwestern Mississippi, USA: Insights from optical and SEM petrography

This study presents new optical petrography and electron microscopy data, interpreted in the context of previously published petrophysical, geochemical, and mineralogical data, to further characterize the Tuscaloosa marine shale (TMS) as an unconventional reservoir in southwestern Mississippi. The basal high resistivity zone has a higher proportion of Type II sedimentary organic matter than the overlying TMS, indicating it is more prone to oil generation. Optical petrography and electron microscopy reveal a heterogeneous clay matrix with ubiquitous pyrite grains, quartz, feldspar, glaucony, foraminifera, shell fragments, and rarer occurrences of apatite and crinoid fragments as well as liptinite, alginite, inertinite, and vitrinite. Our petrographic observations suggest that higher abundances of detrital quartz grains coupled with minimal authigenic cements result in higher porosity and permeability. However, the TMS is also more clay-rich than other unconventional shale oil and gas plays, which can impair the effectiveness of hydraulic fracture stimulation. Thin section observations reveal alternating clay and calcium carbonate laminae that are interpreted to reflect changes in sediment flux. Planktonic foraminifera indicate an overlying oxygenated water column while benthic inoceramid fragments and pervasive authigenic pyrite suggest anoxic or dysoxic bottom water conditions. Apatite fragments in thin section suggest mixing events and an influx of nutrient-rich sediments. Overall, these observations suggest that a variety of paleodepositional environments occurred in the TMS and the lithofacies diversity resulting from these small-scale depositional cycles makes it difficult to determinatively identify areas conducive to enhanced economic hydrocarbon recovery.

Mississippi, Lousianna↗

USGS2020

Applications of correlative light and electron microscopy (CLEM) to organic matter in the North American shale petroleum systems

Scanning electron microscopy (SEM) has revolutionized our understanding of shale petroleum systems through microstructural characterization of dispersed organic matter (OM). However, due to the low atomic weight of carbon, all OM appears black in SEM (BSE image) regardless of differences in thermal maturity or OM type (kerogen types or solid bitumen). Traditional petrographic identification of OM uses optical microscopy, where reflectance (%Ro), form, relief and fluorescence can be used to discern OM types and thermal maturation stage. Unfortunately, most SEM studies of shale OM do not employ correlative optical techniques, leading to misidentifications or to the conclusion that all OM (i.e., kerogen and solid bitumen) is the same. To improve the accuracy of SEM identifications of dispersed OM in shale, this study used correlative light and electron microscopy (CLEM) to create optical and SEM images of OM in the same fields of view (500x magnification) under white light, blue light, secondary electron, and backscatter electron conditions. Samples (n=8) of varying thermal maturities and typical of the North American shale petroleum systems were used, including the Green River Mahogany Zone, Bakken Formation, Ohio Shale, Eagle Ford Formation, Barnett Formation, Haynesville Formation and Woodford Shale. The CLEM image sets demonstrate the importance of correlative microscopy by showing how easily OM can be misidentified when viewed by SEM alone. Without CLEM techniques, petrographic data from SEM such as observations of organic nano-porosity may be misinterpreted, resulting in false or ambiguous results and impairing an improved understanding of organic diagenesis and catagenesis.

Book chapter↗

USGS2019

Reflectance increase from broad beam ion milling of coals and organic-rich shales due to increased surface flatness

Broad ion beam (BIB) milling is useful in organic petrology because it can yield flat sample surfaces and avert the ‘smearing’ of organic matter (OM) that results from traditional mechanical polishing. This potentially makes BIB especially useful in the study of nano-porosity, where even minor mechanical disruption of the sample surface distorts the sample characteristic of interest—the pore structure. However, several studies have observed an OM reflectance increase after BIB milling, concluding that ion milling may cause thermal alteration to OM surfaces. To better understand ion milling effects on organic matter, coal (subbituminous, high volatile bituminous, medium volatile bituminous, anthracite) and shale [Bakken Formation, Ohio Shale-Huron Member (5), Kimmeridge Clay Formation, Alum Shale, New Albany Shale] samples were prepared using traditional mechanical polishing methods. Reflectance measurements (% Ro) were gathered on all maceral types present before BIB milling, followed by re-measurement of OM reflectance at the same locations after milling. Most OM increased in reflectance after BIB milling, with some exceptions in high maturity samples. Liptinite macerals in both coal and shale samples showed the greatest percent reflectance increase on average (+133%; n=338), followed by solid bitumen (+49%; n=313), vitrinite (+26%; n=413), and inertinite (+9%; n=220). Despite the increases to OM reflectance caused by BIB milling, no evidence was found for kerogen conversion (e.g., change in maceral abundances), or for migration of newly generated petroleum (e.g., pseudomorphic replacement of kerogen by solid bitumen). Such changes occur when samples are thermally altered from immature conditions into the oil window (e.g., by hydrous pyrolysis), and, if the increases in OM reflectance were thermally driven (by BIB milling), they should have been observed in the above experiments. Herein, we also used atomic force microscopy to document a decrease in surface roughness of correlative locations of OM on pre- and post-ion milled samples. This improved surface polish caused by BIB milling appears to be the root cause of increased OM reflectance, as no other supporting evidence of thermal alteration could be found. That is, the fraction of light formerly lost to oblique scatter in diffuse reflectance from a mechanically polished surface is converted to specular reflectance after BIB ion milling. Thus the light leaves the surface at a near normal angle and returns to the detector, resulting in increased OM reflectance.

International Journal of Coal Geology↗

USGS2019

Application of electron microscopy TEM and SEM for analysis of coals, organic-rich shales and carbonaceous matter

This paper provides a brief summary of the history, development and variety of applications of electron microscopy techniques to analyze coals, organic-rich shales, and carbonaceous materials. General construction and principles of operation of transmitted (TEM) and scanning electron microscope (SEM) are outlined, along with guidance on specimen preparation, and a brief overview of published TEM and SEM applications related to coal, shales, and carbonaceous materials. This work was accepted as the chapter 18.2 of International Committee for Coal and Organic Petrology Methods Handbook at the ICCP Plenary Session on September 27, 2018 in Brisbane (Australia).

International Journal of Coal Geology↗

USGS2018

Assessment of undiscovered continuous oil and gas resources in the Upper Cretaceous Tuscaloosa marine shale of the U.S. Gulf Coast, 2018

Using a geology-based assessment methodology, the U.S. Geological Survey assessed mean undiscovered, technically recoverable continuous resources of 1.5 billion barrels of oil and 4.6 trillion cubic feet of gas in the Upper Cretaceous Tuscaloosa marine shale in onshore and State waters of Louisiana, Mississippi, Alabama, and Florida in the U.S. Gulf Coast region.

Upper Cretaceous Tuscaloosa Marine Shale↗

USGS2018

On the petrographic distinction of bituminite from solid bitumen in immature to early mature source rocks

The oil-prone maceral bituminite (and its equivalents: ‘amorphous organic matter’, ‘sapropelinite’, ‘amorphinite’, etc.) converts to petroleum during thermal maturation of source rocks, resulting in formation of a mobile saturate-rich hydrocarbon and a polar-rich residue of solid bitumen. Evidence of this transition is preserved in immature to early mature source rocks (e.g., Alum, Bakken, Kimmeridge, New Albany, Ohio shales, among many others), where organic petrography reveals a continuum of textures, reflectance, and fluorescence intensity occurring between bituminite and solid bitumen. Bituminite generally is characterized by high(er) intensity fluorescence, low contrast to the inorganic matrix, lower reflectance (compared to solid bitumen), and heterogeneous wispy or ‘schlieren’ textures. In comparison, solid bitumen generally shows lower intensity or no fluorescence compared to bituminite, a distinct contrast to the mineral matrix which usually includes a gray homogeneous surface of low to moderate reflectance, and may possess void-filling, embayment or groundmass textures suggesting evidence of migration or its in situ exsolution. However, these properties may manifest across a continuous spectrum in a sample or in a single microscope field, often making identification inconclusive. Unambiguous identification is further hampered by sample preparation, e.g., mechanical polish may improve homogeneity of larger accumulations, whereas smaller accumulations, or those sheltered by hard minerals, may appear more heterogeneous, leading to identification of the same organic matter as solid bitumen or bituminite, respectively. The disruptive innovation of ion milling in shale sample preparation leads to increased organic reflectance and surface homogeneity, causing bituminite and other oil-prone macerals, e.g., alginite, to develop a gray reflecting surface which is easy to confuse with solid bitumen, especially when obvious void-filling or embayment textures of the latter are absent. Herein we review distinction of solid bitumen from bituminite and alginite in immature to early mature source rocks, providing examples from nine samples illustrated by typical organic petrography images, including samples from hydrous pyrolysis experiments. Based on a review of the literature, we observe an arbitrary reflectance limit of 0.30% in mechanically polished samples seems to differentiate bituminite (<0.30%) from confident identifications of homogeneous solid bitumen (which otherwise lacks obvious void-filling or identifying embayment textures) as individual macerals on a continuous spectrum in immature and early mature source rocks. Future work conducted by governing bodies such as the International Committee for Coal and Organic Petrology (ICCP) should consider interlaboratory studies conducted on multiple immature source rock samples to develop consensus guidelines for bituminite and solid bitumen discrimination.

International Journal of Coal Geology↗

USGS2018

High microscale variability in Raman thermal maturity estimates from shale organic matter

Raman spectroscopy has recently received attention as a means to estimate thermal maturity of organic matter in petroleum generating source rocks to complement more traditional approaches such as vitrinite reflectance and programmed pyrolysis. While many studies have observed positive correlations between source rock thermal maturity and Raman spectral parameters, little attention has been given to the degree of variation in the Raman response across individual organic grains, especially for shales or mudrocks with highly dispersed organic matter. Here the spatial variation in Raman estimates of thermal maturity within individual organic grains is assessed from shales from the Boquillas, Marcellus, Niobrara, and Woodford Formations. The thermal maturity parameters extracted from Raman spectra can vary widely across distances of ≤5 μm within the same organic grain. These results illustrate the high degree of chemical heterogeneity inherent to the organic matter within these source rocks. Additionally, the spatial pattern of the Raman parameters, as revealed by 2D Raman mapping, imply that organic matter structure is influenced by associations with mineral surfaces within the surrounding rock matrix. Chemical heterogeneity and matrix effects directly impact the Raman response from these types of materials and thus the extracted thermal maturity estimate. These findings highlight the care which must be adopted when making Raman measurements of organic matter within source rock matrices, especially for samples which feature highly dispersed, heterogeneous organic matter as found in petroliferous mudrocks.

International Journal of Coal Geology↗

USGS2017

Utilization of integrated correlative light and electron microscopy (iCLEM) for imaging sedimentary organic matter

We report here a new microscopic technique for imaging and identifying sedimentary organic matter in geologic materials that combines inverted fluorescence microscopy with scanning electron microscopy and allows for sequential imaging of the same region of interest without transferring the sample between instruments. This integrated correlative light and electron microscopy technique is demonstrated with observations from an immature lacustrine oil shale from the Eocene Green River Mahogany Zone and mid‐oil window paralic shale from the Upper Cretaceous Tuscaloosa Group. This technique has the potential to allow for identification and characterization of organic matter in shale hydrocarbon reservoirs that is not possible using either light or electron microscopy alone, and may be applied to understanding the organic matter type and thermal regime in which organic nanoporosity forms, thereby reducing uncertainty in the estimation of undiscovered hydrocarbon resources.

Journal of Microscopy↗

USGS2017

Geologic assessment of undiscovered oil and gas resources—Lower Cretaceous Albian to Upper Cretaceous Cenomanian carbonate rocks of the Fredericksburg and Washita Groups, United States Gulf of Mexico Coastal Plain and State Waters

In 2010, the U.S. Geological Survey (USGS) assessed Lower Cretaceous Albian to Upper Cretaceous Cenomanian carbonate rocks of the Fredericksburg and Washita Groups and their equivalent units for technically recoverable, undiscovered hydrocarbon resources underlying onshore lands and State Waters of the Gulf Coast region of the United States. This assessment was based on a geologic model that incorporates the Upper Jurassic-Cretaceous-Tertiary Composite Total Petroleum System (TPS) of the Gulf of Mexico basin; the TPS was defined previously by the USGS assessment team in the assessment of undiscovered hydrocarbon resources in Tertiary strata of the Gulf Coast region in 2007. One conventional assessment unit (AU), which extends from south Texas to the Florida panhandle, was defined: the Fredericksburg-Buda Carbonate Platform-Reef Gas and Oil AU. The assessed stratigraphic interval includes the Edwards Limestone of the Fredericksburg Group and the Georgetown and Buda Limestones of the Washita Group. The following factors were evaluated to define the AU and estimate oil and gas resources: potential source rocks, hydrocarbon migration, reservoir porosity and permeability, traps and seals, structural features, paleoenvironments (back-reef lagoon, reef, and fore-reef environments), and the potential for water washing of hydrocarbons near outcrop areas. In Texas and Louisiana, the downdip boundary of the AU was defined as a line that extends 10 miles downdip of the Lower Cretaceous shelf margin to include potential reef-talus hydrocarbon reservoirs. In Mississippi, Alabama, and the panhandle area of Florida, where the Lower Cretaceous shelf margin extends offshore, the downdip boundary was defined by the offshore boundary of State Waters. Updip boundaries of the AU were drawn based on the updip extent of carbonate rocks within the assessed interval, the presence of basin-margin fault zones, and the presence of producing wells. Other factors evaluated were the middle Cenomanian sea-level fall and erosion that removed large portions of platform and platform-margin carbonate sediments in the Washita Group of central Louisiana. The production history of discovered reservoirs and well data within the AU were examined to estimate the number and size of undiscovered oil and gas reservoirs within the AU. Using the USGS National Oil and Gas Assessment resource assessment methodology, mean volumes of 40 million barrels of oil, 622 billion cubic feet of gas, and 14 million barrels of natural gas liquids are the estimated technically recoverable undiscovered resources for the Fredericksburg-Buda Carbonate Platform-Reef Gas and Oil AU.

Alabama, Arkansas, Florida, Louisiana, Mississippi↗

USGS2017

Geologic characterization of the hydrocarbon resource potential of the Upper Cretaceous Tuscaloosa marine shale in Mississippi and Louisiana, U.S.A.

Recent oil production from the Upper Cretaceous Tuscaloosa marine shale (TMS) has elevated the formation, previously assessed by the USGS in 2011 as part of the Eagle Ford Group, to its own distinct assessment unit for an upcoming assessment. Geologic characterization in preparation for the 2017 assessment has included the analysis of rock samples and produced oils, and the interpretation of well logs and biostratigraphic data. Results include new mapped extents of the reservoir, which reaches a maximum thickness of almost 500 feet in southern Mississippi and central Louisiana, and geochemical interpretations which support a self-sourced origin for high gravity (36-48 API) low sulfur oil. Programmed pyrolysis and petrography indicate the TMS contains dominantly Type III gas-prone kerogen with some Type II oil-prone kerogen present in the most organic-rich samples. TMS samples contain an average of 47 weight percent total clays, had organic carbon content which ranged from 0.14 to 4.0 weight percent, and had a thermal maturity of 0.57 to 0.99 percent vitrinite reflectance in the productive area. These characteristics were the same for the TMS within an area defined as a “high resistivity zone” and outside of it. These results will be integral to the planned USGS assessment of the TMS.

Conference Paper↗

USGS2016

Aptian ‘Shale Gas’ Prospectivity in the Downdip Mississippi Interior Salt Basin, Gulf Coast, USA

This study evaluates regional ‘shale gas’ prospectivity of the Aptian section (primarily Pine Island Shale) in the downdip Mississippi Salt Basin (MSB). Previous work by the U.S. Geological Survey estimated a mean undiscovered gas resource of 8.8 trillion cubic feet (TCF) in the chronostratigraphic-equivalent Pearsall Formation in the Maverick Basin of south Texas, where industry has established a moderately successful horizontal gas and liquids play. Wells penetrating the downdip MSB Aptian section at depths of 12,000-15,000 ft were used to correlate formation tops in a 15-well cross-section extending about 200 miles (mi) east-southeastward from Adams Co. to Jackson Co. Legacy cuttings from these wells were analyzed for thermal maturity and source rock quality. Bitumen reflectance (n=53) increases with increasing present-day burial depth in the east-central study area from 1.0% to 1.7%. As the Aptian section shallows in Adams Co. to the west, bitumen Ro values are higher (1.7-2.0%), either from relatively greater heat flux or greater mid-Cenomanian uplift and erosion in this area. Total organic carbon (TOC) content ranges 0.01-1.21 and averages 0.5 wt.% (n=51); pyrolysis output (S2; n=51) averages 0.40 mg HC/g rock, indicating little present-day hydrocarbon-generative potential. Bitumen reflectance is preferred as a thermal maturity parameter as Tmax values are unreliable. Normalized X-ray diffraction (XRD) mineral analyses (n=26) indicate high average clay abundance (53 wt.%) relative to quartz (29%) and carbonate (18%). Mineral content shows a spatial relationship to an Appalachian orogen clastic sediment source, with proximal high clay and quartz and distal high carbonate content. Clastic influx from the Appalachian orogen is confirmed by detrital zircon U-Pb ages with dominant Grenville and Paleozoic components [105 ages from a Rodessa sandstone and 112 ages from a Paluxy (Albian) sandstone]. Preliminary information from fluid inclusion microthermometry (41 aqueous measurements from calcite cements in one argillaceous James Limestone sample) indicates homogenization temperatures (Th) of 120-135°C, consistent with present-day bottom-hole conditions and measured bitumen Ro values towards the western end of the MSB. Downdip in the central MSB, microthermometry (26 aqueous measurements from quartz dust rims in one Paluxy sandstone sample) and measured bitumen Ro values indicate maximum temperatures may have been significantly higher (~25°C) than present-day conditions. High inclusion salinities (15-25 wt.% salt) at both locations suggest interaction of pore fluids with evaporites. Mercury injection capillary pressure (MICP) analyses (n=3) indicate porosity ranges 1.3-2.1% and permeability 0.006-0.02 µD for Pine Island and Rodessa shales. Overall, results from this work indicate generally poor ‘shale gas’ prospectivity compared to other shale reservoirs based primarily on depth, low organic content, low porosity, and high clay content. However, thickness and thermal maturity are appropriate, moderate reservoir pressures are present, and petroleum systems modelling by others has indicated high undiscovered gas potential for the basin as a whole.

Conference Paper↗

USGS2015

Pore characteristics of Wilcox Group Coal, U.S. Gulf Coast Region: Implications for the occurrence of coalbed gas

Pore characteristics of 27 subbituminous coal samples (16 mesh splits) from the Paleocene–Eocene Wilcox Group of north Louisiana (Ouachita and Caldwell Parishes) and south Texas (Zavala County) were examined in relation to desorbed gas content. Coal gas of the Wilcox Group is primarily biogenic in origin; thermogenic gas also may be present in some areas. On an as-received basis, desorbed gas contents range from 0.59 to 1.28 m 3 /t for Ouachita Parish samples, 0.37 to 5.19 m 3 /t for the Caldwell Parish samples, and 0.02 to 0.06 m 3 /t for the Zavala County samples. For Louisiana coal samples, micropore surface area and volume are correlated to the desorbed gas content of the Wilcox Group coal (correlations: r = 0.50 and 0.47, respectively), suggesting that micropore surface area and volume are important in terms of gas-holding capacity. Adsorption by micropores appears to be the primary form of gas storage for the Louisiana coal samples. Micropore surface area and volumes also are strongly correlated with the carbon/ash yield ratio (r = 0.97 and 0.94, respectively), indicating that gas sorption occurs primarily on organic matter. Mineral matter appears to reduce the sorption capacity of the coal. Micropore width decreases with depth (r = − 0.63), probably as the result of increasing pressure and coal rank with depth. For the Louisiana coal samples, mesopore surface area is negatively correlated with the carbon/ash yield ratio (r = − 0.70), suggesting that mesopores are preferentially associated with mineral matter. Average mesopore size is correlated with desorbed gas (r = 0.80) for the relatively shallow Ouachita Parish samples (average depth = 441 m, 1446 ft); these results suggest that the permeability of the Wilcox coal is greater in the shallow stratigraphic intervals compared to deeper intervals. Additionally, mesopore size decreases with depth (r = − 0.80). For Ouachita Parish coal samples, negative correlations of gas with mesopore surface area (r = − 0.74) and mesopore volume (r = − 0.56) strongly suggest that gas is not adsorbed in mesopores, and that free gas may be present in larger mesopores, macropores, or fractures of the Wilcox coal. Results also suggest that moisture in Ouachita Parish samples is present in mesopores; moisture in mesopores may have blocked gas adsorption. The low-gas south Texas samples (average depth = 313 m, 1026 ft) are markedly different from the Louisiana samples. Specifically, micropore surface area and micropore volume are negatively correlated with desorbed gas for the Texas samples (r =− 0.21 and − 0.36, respectively). Geologic or environmental conditions probably were not conducive to the generation or storage of microbial gas in the Zavala County coals. The geologic settings (i.e., salinity of formation water, groundwater recharge, permeability of coal) of each study area are important factors that need to be considered in relation to the potential for generation or storage of microbial gas. In south Texas, tectonic stress may have led to a reduction in permeability in the Wilcox Group coal, creating an unfavorable environment for the generation or preservation of microbial gas. The subbituminous rank of the Zavala coals is also too low for significant thermogenic gas generation to have occurred.

Arkansas, Louisiana, Mississippi, Texas↗

USGS2015

Standardization of reflectance measurements in dispersed organic matter: results of an exercise to improve interlaboratory agreement

Vitrinite reflectance generally is considered the most robust thermal maturity parameter available for application to hydrocarbon exploration and petroleum system evaluation. However, until 2011 there was no standardized methodology available to provide guidelines for vitrinite reflectance measurements in shale. Efforts to correct this deficiency resulted in publication of ASTM D7708: Standard test method for microscopical determination of the reflectance of vitrinite dispersed in sedimentary rocks . In 2012-2013, an interlaboratory exercise was conducted to establish precision limits for the D7708 measurement technique. Six samples, representing a wide variety of shale, were tested in duplicate by 28 analysts in 22 laboratories from 14 countries. Samples ranged from immature to overmature (0.31-1.53% R o ), from organic-lean to organic-rich (1-22 wt.% total organic carbon), and contained Type I (lacustrine), Type II (marine), and Type III (terrestrial) kerogens. Repeatability limits (maximum difference between valid repetitive results from same operator, same conditions) ranged from 0.03-0.11% absolute reflectance, whereas reproducibility limits (maximum difference between valid results obtained on same test material by different operators, different laboratories) ranged from 0.12-0.54% absolute reflectance. Repeatability and reproducibility limits degraded consistently with increasing maturity and decreasing organic content. However, samples with terrestrial kerogens (Type III) fell off this trend, showing improved levels of reproducibility due to higher vitrinite content and improved ease of identification. Operators did not consistently meet the reporting requirements of the test method, indicating that a common reporting template is required to improve data quality. The most difficult problem encountered was the petrographic distinction of solid bitumens and low-reflecting inert macerals from vitrinite when vitrinite occurred with reflectance ranges overlapping the other components. Discussion among participants suggested this problem could not be easily corrected via kerogen concentration or solvent extraction and is related to operator training and background. No statistical difference in mean reflectance was identified between participants reporting bitumen reflectance vs. vitrinite reflectance vs. a mixture of bitumen and vitrinite reflectance values, suggesting empirical conversion schemes should be treated with caution. Analysis of reproducibility limits obtained during this exercise in comparison to reproducibility limits from historical interlaboratory exercises suggests use of a common methodology (D7708) improves interlaboratory precision. Future work will investigate opportunities to improve reproducibility in high maturity, organic-lean shale varieties.

Marine and Petroleum Geology↗

USGS2014

Organic petrology of the Aptian-age section in the downdip Mississippi Interior Salt Basin, Mississippi, USA: Observations and preliminary implications for thermal maturation history

This study identifies a thermal maturity anomaly within the downdip Mississippi Interior Salt Basin (MISB) of southern Mississippi, USA, through examination of bitumen reflectance data from Aptian-age strata (Sligo Formation, Pine Island Shale, James Limestone, and Rodessa Formation). U.S. Geological Survey (USGS) reconnaissance investigations conducted in 2011–2012 examined Aptian-age thermal maturity trends across the onshore northern Gulf of Mexico region and indicated that the section in the downdip MISB is approaching the wet gas/condensate window (R o ~1.2%). A focused study in 2012–2013 used 6 whole core, one sidewall core, and 49 high-graded cutting samples (depth range of 13,000–16,500 ft [3962.4–5029.2 m] below surface) collected from 15 downdip MISB wells for mineralogy, fluid inclusion, organic geochemistry, and organic petrographic analysis. Based on native solid bitumen reflectance (R o generally > 0.8%; interpreted to be post-oil indigenous bitumens matured in situ), R o values increase regionally across the MISB from the southeast to the northwest. Thermal maturity in the eastern half of the basin (R o range 1.0 to 1.25%) appears to be related to present-day burial depth and shows a gradual increase with respect to depth. To the west, thermal maturity continues to increase even as the Aptian section shallows structurally on the Adams County High (R o range 1.4 to > 1.8%). After evaluating the possible thermal agents responsible for increasing maturity at shallower depths (i.e., igneous activity, proximity to salt, variations in regional heat flux, and uplift), we tentatively propose that either greater paleoheat flow or deeper burial coupled with uplift in the western part of the MISB could be responsible for the thermal maturity anomaly. Further research and additional data are needed to determine the cause(s) of the thermal anomaly.

International Journal of Coal Geology↗

USGS2014

U.S. Geological Survey unconventional petroleum systems research in south Mississippi: Observations on burial history and thermal maturity in the Cretaceous

Shale hydrocarbon ‘resource’ plays have revolutionized the United States energy mix over the last 5 years. These plays are diverse in lithology and age but share the common feature of occurring in ‘tight’ formations which require hydraulic (hydro-) fracturing for economic flow rates. In general, economic success requires an organic-rich reservoir with a quartz- or carbonate-rich mineralogy that responds to artificial stimulation by fracturing. The U.S. Geological Survey (USGS) is tasked with estimating the quantity and quality of undiscovered hydrocarbons reservoired in shales. In support of that mission, we began an investigation of unconventional petroleum systems in the southern part of the Mississippi Salt Basin in 2012, building on earlier reconnaissance work that identified this area as potentially prospective for ‘shale’ gas (Enomoto et al., 2012). While our recent studies (Valentine et al., 2014a; Hackley et al., 2014) have suggested poor ‘shale’ gas prospectivity (due to low organic content, low porosity, high clay content, and significant depth), at least for the Aptian section, they also have generated a wealth of new information about thermal maturity in the Cretaceous of south Mississippi. In addition, our work to-date has set the stage for future USGS evaluation of unconventional hydrocarbons reservoired in the Upper Cretaceous Tuscaloosa Marine Shale (TMS). Here, we summarize recent USGS thermal maturity studies in the south Mississippi Salt Basin.

Mississippi↗

USGS2013

Development of web-based organic petrology photomicrograph atlases and internet resources for professionals and students

With advances in web applications, organic petrography and other related disciplines are in need of updated online resources and educational tools to aid professionals and students in the identification and interpretation of macerals. The U.S. Geological Survey (USGS) Organic Petrology Laboratory along with USGS Eastern Energy Resources Science Center Information Technology staff have developed five web atlases containing images of organic matter in geologic materials: 1. an American Society for Testing and Materials (ASTM) Atlas, 2. an Organic Petrology Taxonomy for International Classification (OPTIC) of Coal Macerals Atlas, 3. an Interactive Gulf Coast Photomicrograph Web Atlas (I-Map), 4. an Organic Material in Shales Atlas (Shale), and 5. an interactive Blue/White/Ultraviolet (UV) Light Atlas (Light). Each web atlas contains images of macerals with associated sample and petrographic data collected by the USGS. These webpages will provide means to preserve and circulate petrographic data collected by the USGS for coal and shale samples from all over the world.

International Journal of Coal Geology↗

USGS2013

Geologic assessment of undiscovered oil and gas resources: Oligocene Frio and Anahuac Formations, United States Gulf of Mexico coastal plain and State waters

The Oligocene Frio and Anahuac Formations were assessed as part of the 2007 U.S. Geological Survey (USGS) assessment of Tertiary strata of the U.S. Gulf of Mexico Basin onshore and State waters. The Frio Formation, which consists of sand-rich fluvio-deltaic systems, has been one of the largest hydrocarbon producers from the Paleogene in the Gulf of Mexico. The Anahuac Formation, an extensive transgressive marine shale overlying the Frio Formation, contains deltaic and slope sandstones in Louisiana and Texas and carbonate rocks in the eastern Gulf of Mexico. In downdip areas of the Frio and Anahuac Formations, traps associated with faulted, rollover anticlines are common. Structural traps commonly occur in combination with stratigraphic traps. Faulted salt domes in the Frio and Anahuac Formations are present in the Houston embayment of Texas and in south Louisiana. In the Frio Formation, stratigraphic traps are found in fluvial, deltaic, barrier-bar, shelf, and strandplain systems. The USGS Tertiary Assessment Team defined a single, Upper Jurassic-Cretaceous-Tertiary Composite Total Petroleum System (TPS) for the Gulf Coast basin, based on previous studies and geochemical analysis of oils in the Gulf Coast basin. The primary source rocks for oil and gas within Cenozoic petroleum systems, including Frio Formation reservoirs, in the northern, onshore Gulf Coastal region consist of coal and shale rich in organic matter within the Wilcox Group (Paleocene–Eocene), with some contributions from the Sparta Sand of the Claiborne Group (Eocene). The Jurassic Smackover Formation and Cretaceous Eagle Ford Formation also may have contributed substantial petroleum to Cenozoic reservoirs. Modeling studies of thermal maturity by the USGS Tertiary Assessment Team indicate that downdip portions of the basal Wilcox Group reached sufficient thermal maturity to generate hydrocarbons by early Eocene; this early maturation is the result of rapid sediment accumulation in the early Tertiary, combined with the reaction kinetic parameters used in the models. A number of studies indicate that the migration of oil and gas in the Cenozoic Gulf of Mexico basin is primarily vertical, occurring along abundant growth faults associated with sediment deposition or along faults associated with salt domes. The USGS Tertiary assessment team developed a geologic model based on recurring regional-scale structural and depositional features in Paleogene strata to define assessment units (AUs). Three general areas, as described in the model, are found in each of the Paleogene stratigraphic intervals assessed: “Stable Shelf,” “Expanded Fault,” and “Slope and Basin Floor” zones. On the basis of this model, three AUs for the Frio Formation were defined: (1) the Frio Stable Shelf Oil and Gas AU, containing reservoirs with a mean depth of about 4,800 feet in normally pressured intervals; (2) the Frio Expanded Fault Zone Oil and Gas AU, containing reservoirs with a mean depth of about 9,000 feet in primarily overpressured intervals; and (3) the Frio Slope and Basin Floor Gas AU, which currently has no production but has potential for deep gas resources (>15,000 feet). AUs also were defined for the Hackberry trend, which consists of a slope facies stratigraphically in the middle part of the Frio Formation, and the Anahuac Formation. The Frio Basin Margin AU, an assessment unit extending to the outcrop of the Frio (or basal Miocene), was not quantitatively assessed because of its low potential for production. Two proprietary, commercially available databases containing field and well production information were used in the assessment. Estimates of undiscovered resources for the five AUs were based on a total of 1,734 reservoirs and 586,500 wells producing from the Frio and Anahuac Formations. Estimated total mean values of technically recoverable, undiscovered resources are 172 million barrels of oil (MMBO), 9.4 trillion cubic feet of natural gas (TCFG), and 542 million barrels of natural gas liquids for all of the Frio and Anahuac AUs. Of the five units assessed, the Frio Slope and Basin Floor Gas AU has the greatest potential for undiscovered gas resources, having an estimated mean of 5.6 TCFG. The Hackberry Oil and Gas AU shows the second highest potential for gas of the five units assessed, having an estimated mean of 1.8 TCFG. The largest undiscovered, conventional crude oil resource was estimated for the Frio Slope and Basin Floor Gas AU; the estimated mean for oil in this AU is 110 MMBO.

Louisiana;Texas↗

USGS2013

Geologic model for the assessment of undiscovered hydrocarbons in Lower to Upper Cretaceous carbonate rocks of the Fredericksburg and Washita groups, U.S. Gulf Coast Region

As part of the assessment of undiscovered oil and gas resources in Jurassic and Cretaceous strata of the U.S. Gulf Coast in 2010, the U.S. Geological Survey assessed carbonate rocks of the Fredericksburg and Washita groups and their equivalent units underlying onshore lands and State waters. One conventional assessment unit extending from south Texas to the Florida panhandle was defined: the Fredericksburg-Buda Carbonate Platform-Reef Gas and Oil assessment unit. Assessed strata range in age from Early Cretaceous Albian to Late Cretaceous Cenomanian. The assessment was based on a geologic model that incorporated the Upper Jurassic–Cretaceous–Tertiary Composite Total Petroleum System of the Gulf of Mexico Basin. The following factors were evaluated to define the assessment unit and estimate undiscovered oil and gas resources: potential source rocks, hydrocarbon migration, reservoir porosity and permeability, traps and seals, structural features, depositional framework, and potential for water washing of hydrocarbons near outcrop areas. Analysis of the production history of discovered reservoirs and well data within the assessment unit was also essential for estimating the numbers and sizes of undiscovered oil and gas reservoirs within the assessment unit. The downdip boundary of the assessment unit was drawn as an arbitrary line 10 miles downdip of the Lower Cretaceous shelf margin, to include potential reef-talus reservoirs, a facies described in the geologic model developed for the assessment. Updip boundaries of the assessment unit were drawn based on the updip extent of assessment unit carbonate reservoir rocks, basin margin fault zones, and (or) the presence of producing wells within the assessed interval. Using the U.S. Geological Survey methodology, mean undiscovered resources of 40 million barrels of oil, 622 billion cubic feet of gas, and 14 million barrels of natural gas liquids were estimated for the assessment unit.

U.S. Gulf Coast↗