Search USGS⌕ Search

Geology topics

Benjamin J. Drenth

Publications and source records attributed to Benjamin J. Drenth.

At least 19 recordsLinked to original sources
USGS2026

Geophysical architecture and geochronology of the Neoarchean Mentor anorthosite intrusive complex, northwestern Minnesota: Largest anorthosite complex of the Superior Province?

The Neoarchean Mentor anorthosite intrusive complex (MAIC) lies within the Wawa subprovince in northwestern Minnesota, in a region where the Wawa, Quetico, and Wabigoon subprovinces are juxtaposed in close proximity. Archean rocks are entirely concealed, and interpretations are developed from aeromagnetic, gravity, and borehole samples. The MAIC includes both anorthosite (dense, weakly magnetized) and oxide-rich gabbro (strongly magnetized) lithologies. Anorthosite is coarse-grained to megacrystic, intensely altered, and locally brecciated. Pervasive epidote alteration enhanced the density of the anorthosite via introduction of higher-density mineral assemblages, explaining why the MAIC produces a significant gravity high. Oxide-rich gabbro forms a border phase of the MAIC and has potential for vanadium, chromium, and titanium mineralization, and produces a strong aeromagnetic high. The MAIC is interpreted to extend over an area of 640 km 2 , making it the largest known anorthosite complex of the Superior Province, as measured by preserved areal extent. Modeling indicates the MAIC extends more than 6 km into the subsurface. A new Pb–Pb zircon age of 2737.2 ± 4.5 Ma is interpretated as the crystallization age of anorthosite within the MAIC, showing that the MAIC formed well before the ca. 2690 Ma Shebandowanian orogeny, and raising new questions about correlations with other parts of the Wawa subprovince. A low-density batholith, here informally called the Fertile batholith, is interpreted to intrude the southern part of the MAIC. A new Pb–Pb zircon age of 2701.1 ± 6 Ma is interpreted as the magmatic age of the Fertile batholith.

Minnesota↗
USGS2025

New constraints on location and timing of the Great Lakes tectonic zone, central Upper Peninsula, Michigan, USA

The Great Lakes tectonic zone (GLTZ) forms the boundary between the Wawa–Abitibi and Minnesota River Valley subprovinces within the Archean Superior Province. The GLTZ is concealed for all of its 1100 km length, except for a segment in the central Upper Peninsula of Michigan. There, it is exposed as a northwest-striking mylonite zone along a 11 km segment, extending to the onlap of Paleozoic rocks to the east. Farther east, its location has been unknown. Here, we use aeromagnetic and gravity data to develop interpretations of the expression of the GLTZ and to define its extent under cover. Aeromagnetic gradients over the mylonite zone are interpreted to be produced by structurally juxtaposed rocks with varying magnetizations. Gravity data show a regional gradient along the GLTZ, produced by the juxtaposition of a dense greenstone belt on the north against lower-density gneisses and granites on the south. The GLTZ is interpreted to extend ∼55 km under cover to the east. The GLTZ is terminated on the east by the buried eastern arm of the ca. 1100 Ma Midcontinent Rift. An undeformed granitic dike that cuts the mylonitic foliation produces a U–Pb apatite age of 2523 ± 33 Ma, implying no major post-Archean shearing occurred, and is at odds with previous interpretations of major Proterozoic reactivation. A granite intrusion in the Minnesota River Valley subprovince produces a Pb–Pb zircon age of 2606.9 ± 3.6/7.4 Ma. This suggests that magmatism related to the Sacred Heart orogeny, previously known in Minnesota, extended to Michigan.

Michigan↗
USGS2025

The feasibility of using lidar-derived digital elevation models for gravity data reduction

Gravity data require submeter elevation accuracy for data processing, and differential global navigation satellite system (dGNSS) equipment is commonly used to acquire three-dimensional positional data to achieve such accuracy. However, lidar (light detection and ranging) data are commonly used to develop digital elevation models (DEMs) of Earth’s surface. Therefore, using elevations from lidar-derived DEMs for gravity-data acquisition and reduction may improve field efficiency and reduce cost. This study examines the feasibility of using DEMs for gravity-data reduction by comparing dGNSS elevation data from 435 gravity stations in Michigan, Wyoming, and Colorado with their respective DEM elevations. The results show that the average difference between DEM and dGNSS elevations is 13 centimeters (cm) and that 93 percent of those differences are less than 50 cm, even in areas with steep terrain. Because an elevation discrepancy of 50 cm corresponds to an error of roughly 0.1 milligals (mGal) in the simple Bouguer gravity anomaly, the results suggest that lidar-derived DEMs are a viable source for acquiring the elevation data needed to process gravity data, thus improving both the cost and efficiency of data collection for regional surveys where an accuracy of less than 1.0 mGal is desired.

Open-File Report↗
USGS2023

Aeromagnetic expression of the central Nagssugtoqidian Orogen, South-East Greenland

The Paleoproterozoic Nagssugtoqidian Orogen is one of the principal tectonic features related to the assembly of Nuna, extending across Greenland from east to west and forming an orogenic belt separating the North Atlantic Craton on the south from the Rae Craton on the north. In South-East Greenland, the Ammassalik Intrusive Complex (AIC) (∼1910 to 1870 Ma) occupies the central part of the orogenic belt, was formed by subduction- and magmatic arc-related processes, and has significant potential for undiscovered deposits of critical minerals. Previous interpretations of aeromagnetic data have been hindered by terrain effects, and we use a novel mix of geophysical analysis tools to develop new tectonomagmatic interpretations of the central Nagssugtoqidian Orogen in South-East Greenland. These interpretations extend into areas covered by ocean and ice. Results show that Archean rocks of the juxtaposed North Atlantic (Isertoq Terrane) and Rae (Kuummiut Terrane) Cratons are relatively weakly magnetized (with the exception of rocks of the Schweizerland Terrane) and have a NW-striking structural fabric that likely formed or was enhanced during the Nagssugtoqidian Orogeny. The AIC is structurally complex, with weakly magnetized metasedimentary rocks, and both weakly and strongly magnetized intrusions, arrayed in a NW-striking tectonic fabric. The strongly magnetized intrusions are largely concealed and distributed in a broader and more spatially complex fashion than previously known, suggesting that additional areas may be considered for mineral exploration. Strongly magnetized NW-striking dikes are imaged within the AIC, where they are spatially closely related to the strongly magnetized intrusions, and extend southward into the North Atlantic Craton (Isertoq Terrane). This spatial pattern of arc magmatism is consistent with previously developed models of SW-directed subduction that preceded collision during the Nagssugtoqidian Orogeny. The strongly magnetized Ammassalik Batholith (∼1670 Ma) and related intrusions form a cluster of plutons within ∼ 50 km of the Nagssugtoqidian suture. Their tectonomagmatic setting is unknown, although are speculatively related to delamination of a lithospheric keel formed during the Nagssugtoqidian Orogeny ∼ 200 m.y. prior. Numerous strongly magnetized NNE-striking Paleogene dikes, related to the opening of the Atlantic Ocean, are imaged cutting most other geologic units.

Greenland↗
USGS2023

Geophysical mapping of the Great Lakes Tectonic Zone and surrounding Precambrian geology in the central Upper Peninsula, Michigan

The Great Lakes Tectonic Zone (GLTZ) forms the boundary between the Wawa-Abitibi subprovince (north side) and Minnesota River Valley subprovince (south side) within the Archean Superior Province. The GLTZ is concealed for all of its 1100 km length, except south of Marquette in the central Upper Peninsula of Michigan (Sims, 1991; Sims and Day, 1993). Near KI Sawyer, it is exposed as a NW-striking, 2.3 km wide mylonite zone along a strike length of about 11 km, with a mylonitic foliation that dips steeply to the SW (Sims, 1993). The location extent of the GLTZ is unknown to the east where it is concealed beneath Paleozoic sedimentary rocks. We use legacy aeromagnetic data (Daniels et al., 2009) in combination with modern aeromagnetic data (Drenth and Brown, 2020) and ground gravity data to geophysically characterize the GLTZ and map its eastward extent under cover and map additional nearby covered Precambrian tectonic elements.

Michigan↗
USGS2023

Geophysical architecture of the Neoarchean Mentor anorthosite intrusive complex, northwestern Minnesota

The ca. 2737 Ma (Souders, 2023) Mentor anorthosite intrusive complex (MAIC) lies near the northern margin of the Wawa subprovince of the Archean Superior Province, in an area of northwestern Minnesota where the Wawa, Quetico, and Wabigoon subprovinces are juxtaposed in close proximity (Fig. 1). The rocks of interest are entirely concealed by 10s to >100 m of unconsolidated Quaternary sediments and localized Cretaceous strata and saprolite. The MAIC comprises a large volume of megacrystic anorthosite, with a lesser volume of oxide-rich gabbros. The gabbros are known, from a single borehole intersection at ~70 m depth, to be enriched in vanadium (see http://minarchive.dnr.state.mn.us), and have further potential for chromium and titanium mineralization. New interpretations are based on data from an Earth Mapping Resources Initiative (MRI)-sponsored aeromagnetic survey flown in 2021 and pre-existing ground gravity data, constrained by approximately ten boreholes in the area.

Minnesota↗
USGS2022

Focus areas for data acquisition for potential domestic resources of 13 critical minerals in the conterminous United States and Puerto Rico — Antimony, barite, beryllium, chromium, fluorspar, hafnium, helium, magnesium, manganese, potash, uranium, vanadium, and zirconium

The Earth Mapping Resources Initiative (Earth MRI) is conducted in phases to identify areas for acquiring new geologic framework data to identify potential domestic resources of the 35 mineral materials designated as critical minerals for the United States. This report describes the data sources and summary results for 13 critical minerals evaluated in the conterminous United States and Puerto Rico during phase 3 of the study (antimony, barite, beryllium, chromium, fluorspar, hafnium, helium, magnesium, manganese, potash, uranium, vanadium, and zirconium). Phases 1 and 2 of the Earth MRI addressed aluminum, cobalt, graphite, lithium, niobium, platinum-group elements (PGEs), rare earth elements (REEs), tantalum, tin, titanium, and tungsten. Critical minerals in Alaska are covered in a separate report. No focus areas for phase 3 critical minerals are delineated for Hawaii. The geologic, geochemical, topographic, and geophysical mapping provided by the Earth MRI documents geologic features that reflect the extent of individual mineral systems and provides information about critical mineral deposits that may not have been previously considered. The mineral-systems approach links critical mineral commodities to deposit types that represent the manifestations of large mineral systems. Each of the 13 critical mineral commodities for phase 3 of the Earth MRI is discussed in terms of its importance to the Nation’s economy, modes of occurrence, mineral systems, and deposit types, and is accompanied by maps and tables listing examples of focus areas in the conterminous United States and Puerto Rico. Examples of important mineral systems for this group of 13 critical minerals include basin brine path systems for barite and fluorspar, Carlin-type systems and Coeur d’Alene systems for antimony, chemical weathering and volcanogenic seafloor systems for manganese, Climax-type systems for beryllium, mafic magmatic systems for chromium, marine evaporite systems for potash and magnesium, meteoric recharge systems for uranium, petroleum systems for helium, and placer systems for zirconium and hafnium.

Open-File Report↗
USGS2021

Geophysical insights into Paleoproterozoic tectonics along the southern margin of the Superior Province, central Upper Peninsula, Michigan, USA

The southern margin of the Archean Superior Province in the central Upper Peninsula of Michigan was a nexus for key Paleoproterozoic tectonic events involved in the ~2.1 Ga rifting of proposed Archean supercraton Superia and subsequent assembly of Laurentia. Interpretations of the region’s tectonic history have historically been hampered by extensive Pleistocene glacial and Paleozoic sedimentary cover and a lack of appropriate geophysical data. These rifting and orogenic events formed geologic effects that are readily mappable with modern geophysical methods. New aeromagnetic and gravity data provide a critical means of mapping and interpreting the complex geological framework through cover, allowing development of significantly richer geographical and process-based perspectives on all these tectonic events. Interpretations of Precambrian contacts and structure are here, for the first time, carried >30 km eastward under Paleozoic cover. Effects of ~2.1 Ga rifting are strongly expressed geophysically, including the Dickinson Group, perhaps a unique record of the progression of rift-related sedimentation and magmatism, shown here to be a geographically extensive and largely concealed tectonic feature of the southern Superior Province. The geophysical evidence for plausible ~2.1 Ga rift-related intrusive magmatism includes a previously unrecognized swarm of northeast-striking mafic dikes cutting Archean rocks and gravity lows produced by granites. Effects of the ~1.87–1.83 Ga Penokean orogeny include gravity and magnetic gradients and pattern breaks along the Niagara fault zone suture, abundant evidence for thin-skinned thrusting and folding in the Menominee iron district, and speculative emplacement of an allochthonous sedimentary sequence in the Calumet trough. Numerous east–west trending structures imaged geophysically likely originated, or were significantly reactivated by, post-Penokean deformation. Metamorphic events at ~1.76 Ga and ~1.65 Ga may correspond to orogenies involving younger, outboard Paleoproterozoic crustal provinces recognized in southern Laurentia. For example, the previously unrecognized West Branch fault, separating the Dickinson Group from Archean rocks, is shown to be a major structure in the region, and is a proposed expression of ~1.76 Ga thick-skinned deformation. Oblique disruptions of crudely east–west striking structures have robust geophysical expressions and are speculatively connected to transpressive deformation at ~1.65 Ga. These new geophysical observations and interpretations collectively help illuminate a critical period in the tectonic evolution of Laurentia, as it transitioned from a disparate array of Archean cratons to a more coherent, growing continent.

Minnesota, Wisconsin, Michigan↗
USGS2020

Focus areas for data acquisition for potential domestic resources of 11 critical minerals in the conterminous United States, Hawaii, and Puerto Rico—Aluminum, cobalt, graphite, lithium, niobium, platinum-group elements, rare earth elements, tantalum, tin, titanium, and tungsten

In response to a need for information on potential domestic sources of critical minerals, the Earth Mapping Resources Initiative (Earth MRI) was established to identify and prioritize areas for acquisition of new geologic mapping, geophysical data, and elevation data to improve our knowledge of the geologic framework of the United States. Phase 1 of Earth MRI concentrated on those geologic terranes favorable for hosting the rare earth elements (REEs). Phase 2 continued to address the REEs and also identified focus areas for potential domestic sources of 10 more of the 35 critical minerals on the U.S. critical minerals list (aluminum, cobalt, graphite, lithium, niobium, platinum-group elements, tantalum, tin, titanium, tungsten). This report describes the methodology, data sources, and summary results for mineral systems that host these 11 critical minerals in the conterminous United States, Hawaii, and Puerto Rico; Alaska is covered in a separate report. The mineral systems framework adopted for this study links critical mineral commodities to families of genetically related mineral deposit types. The mineral systems approach is an efficient approach, providing a simultaneous evaluation of geologic terranes through aggregation of genetically related mineral deposit types that are much larger than individual ore deposits. Geologic, geochemical, topographic, and geophysical mapping provided by Earth MRI will document geologic features that reflect the extent of individual mineral systems and provide information about critical mineral deposits that may not have been recognized previously. Each critical mineral commodity is discussed in terms of importance to the Nation’s economy, modes of occurrence, mineral systems, and deposit types along with maps and tables listing examples of focus areas for each critical mineral. Important mineral systems for these critical minerals include chemical weathering systems for aluminum (bauxite); placer systems for titanium and REEs; metamorphic systems for graphite; mafic magmatic systems for platinum-group elements and cobalt; lacustrine evaporite and porphyry tin systems for lithium; and copper-molybdenum-gold (Cu-Mo-Au) systems for tungsten. REEs occur in many different mineral systems. Focus areas were developed by scientists from the U.S. Geological Survey in collaboration with scientists from State geological surveys and other institutions. This first national-scale compilation of focus areas represents an initial step in addressing the Nation’s critical mineral needs by screening areas for acquisition of new data to provide the geologic framework necessary for identifying domestic sources of critical minerals.

Open-File Report↗
USGS2020

Evidence for a concealed Midcontinent Rift-related northeast Iowa intrusive complex

Large amplitude aeromagnetic and gravity anomalies over a ~9500 km 2 area of northeast Iowa and southeast Minnesota have been interpreted to reflect the northeast Iowa intrusive complex (NEIIC), a buried intrusive igneous complex composed of mafic/ultramafic rocks in the Yavapai Province (1.8–1.7 Ga). Hundreds of meters of Paleozoic sedimentary cover and a paucity of basement drilling have prevented detailed studies of the NEIIC. Long considered, but not proven, to be related to the ~1.1 Ga Midcontinent Rift System (MRS), the NEIIC is comparable in areal extent to the richly mineralized Duluth Complex and is similarly located near the margin of the MRS. New geochronological and geophysical data together support an MRS affinity for the NEIIC. A dike swarm imaged in aeromagnetic data is cut by intrusions of the NEIIC, and a new apatite U-Pb date of ~1170 Ma on one of the dikes thus represents a maximum age for the NEIIC. A minimum age constraint is suggested by (1) large-volume magmatism associated with the MRS that was the last such event to affect the region; and (2) the presence of reversely magnetized dikes, similar in character to MRS-related dikes elsewhere, that cut several intrusions of the NEIIC. The NEIIC is largely characterized by the presence of multiple zoned intrusions, many of which contain large volumes of mafic-ultramafic rocks and have strong geophysical similarities to alkaline intrusive complexes elsewhere, including the MRS-related Coldwell Complex of Ontario. The largest of the zoned intrusions are ~40 km in diameter and are interpreted to have thicknesses of many kilometers. Suspected faults, alignments of intrusions, and intrusive margins tend to be aligned along northwest and northeast trends that match the trends of the Belle Plaine fault zone and Fayette structural zone, both previously interpreted as pre-MRS, possibly lithospheric-scale discontinuities that may have controlled NEIIC emplacement. These interpretations collectively imply notable potential for the NEIIC to host several different types of undiscovered base metal and critical mineral deposits.

Iowa, Minnesota↗
USGS2019

A shallow rift basin segmented in space and time: The southern San Luis Basin, Rio Grande rift, northern New Mexico, U.S.A.

Interpretation of gravity, magnetotelluric, and aeromagnetic data in conjunction with geologic constraints reveals details of basin geometry, thickness, and spatiotemporal evolution of the southern San Luis Basin, one of the major basins of the northern Rio Grande rift. Spatial variations of low-density basin-fill thickness are estimated primarily using a 3D gravity inversion method that improves on previous modeling efforts by separating the effects of the low-density basin fill from the effects of pre-rift rocks. The basin is found to be significantly narrower—and more complex in the subsurface—than indicated or implied by previous modeling efforts. The basin is also estimated to be significantly shallower than previously estimated. Five distinct subbasins are recognized within the broader southern San Luis Basin. The oldest and shallowest subbasin is the Las Mesitas graben along the northwestern basin margin, formed during the Oligocene transition from Southern Rocky Mountain volcanic field magmatism to rifting. In this subbasin, sediments are estimated to reach a maximum thickness of ~400 m within a north–south elongated structural depression. Other subbasins that likely initially developed during the Miocene are the dominant tectonic features in the southern San Luis Basin. This includes the Tres Orejas subbasin, which formed in the southwestern portion of the basin by the Embudo fault zone and a hypothesized fault zone along its western margin. This subbasin reaches a maximum thickness of ~2 km, as indicated by magnetotelluric and gravity modeling. The Sunshine Valley, Questa, and Taos subbasins occupy the eastern part of the southern San Luis Basin. The southern Sangre de Cristo fault zone is the dominant tectonic feature that controlled their development after ~20 Ma. The east-down Gorge fault zone controlled the western margins of significant parts of these eastern subbasins, although much of the Taos subbasin may be superimposed on the Tres Orejas subbasin. Maximum low-density basin-fill thicknesses are estimated to be 1.2 km for the Sunshine Valley subbasin, 800 m for the Questa subbasin, and 1.8 km for the Taos subbasin. Subbasin-forming tectonic activity along the Gorge fault zone and within the Tres Orejas subbasin ceased by the end of the development of the largely Pliocene Taos Plateau volcanic field. After that, rift-related subsidence became more narrowly centered on the eastern margin of the basin, controlled mainly by the linked Embudo and southern Sangre de Cristo fault zones.

New Mexico↗
USGS2019

The US Geological Survey’s Earth Mapping Resources Initiative (Earth MRI)—Providing framework geologic, geophysical, and elevation data to the nation’s critical mineral-bearing regions

New detailed mapping of the geologic resources of the Nation has the potential to significantly close the gap in the essential data needed to fuel a modern era of economic development and technological innovation, while at the same time dramatically enhancing our understanding of the fundamental way geology impacts everyday life, from the domestic critical mineral resources that are necessary for modern technology and the economy, to domestic energy and water resources, geologic hazards, agriculture, and other pressing needs. The U.S. Geological Survey established the Earth Resources Mapping Initiative (Earth MRI) to address the shortfall in geologic, geophysical, and elevation data with sufficient detail to support evaluation of regions in the United States that have potential to host critical mineral resources. The new effort is a collaboration with the Association of American State Geologists, who are providing new detailed geologic maps and making available online archived data and information related to critical mineral resources. The geophysical and lidar surveys are being contracted through industry specialists to assure that high-quality data are available to the public. This article provides an overview of the Earth MRI effort with discussions on the initial geophysical surveys funded for areas that have known potential for rare earth element resources. Subsequent projects are being designed to address areas that may host other critical mineral resources.

Fast Times↗
USGS2017

Geophysical expression of buried range-front embayment structure: Great Sand Dunes National Park, Rio Grande rift, Colorado

Great Sand Dunes National Park and Preserve (GRSA, Colorado) lies along the eastern margin of the San Luis Basin and the tectonically active Sangre de Cristo fault system that are part of the northern Rio Grande rift. GRSA lies within a prominent embayment in the range front where two separate sections of the Sangre de Cristo fault system intersect. Fault scarps are observed along both intersecting fault zones within older basin-fill alluvium, but have been obscured by the actively migrating dunefield. The dune sand is also strongly magnetic, locally limiting the usefulness of aeromagnetic methods for mapping concealed structure. This study uses airborne geophysical methods, primarily airborne gravity gradient data, along with constraints from geologic mapping and limited subsurface data and groundwater modeling, to interpret the subsurface basin geometry and range-front structure of the embayment. Using forward modeling of the gravity gradient data and locations of faults inferred from gravity gradient and aeromagnetic lineaments, several previously unrecognized tectonic elements are interpreted adjacent to the range front. Some of the largest rift-related fault offsets are demonstrated to be basinward of the normal fault zones mapped at the surface along the range front of the Sangre de Cristo Mountains, along faults concealed under the dunefield and subparallel to the two fault sections. A fault-bounded structural bench, likely composed of Proterozoic rocks, underlies most of the high dunefield at depths of 500 m to 1 km. The bench is truncated on its southwest margin by a northwest-trending, southwest-dipping normal fault. A northeast-trending, northwest-dipping normal fault with ∼600 m of estimated relief lies under the southern margin of the dunefield and bounds a structurally higher bench of Proterozoic rocks concealed at <400 m depth near the range front. The northwest- and northeast-trending geophysical lineaments generally correspond well with the trends of faults mapped at the surface, and with both pre- and syn-rift structures in the Sangre de Cristo Mountains. Aeromagnetic anomalies are explained by variations in the magnetization of pre-rift rocks, and the strongly magnetic dune sand.

Colorado↗
USGS2017

A shifting rift—Geophysical insights into the evolution of Rio Grande rift margins and the Embudo transfer zone near Taos, New Mexico

We present a detailed example of how a subbasin develops adjacent to a transfer zone in the Rio Grande rift. The Embudo transfer zone in the Rio Grande rift is considered one of the classic examples and has been used as the inspiration for several theoretical models. Despite this attention, the history of its development into a major rift structure is poorly known along its northern extent near Taos, New Mexico. Geologic evidence for all but its young rift history is concealed under Quaternary cover. We focus on understanding the pre-Quaternary evidence that is in the subsurface by integrating diverse pieces of geologic and geophysical information. As a result, we present a substantively new understanding of the tectonic configuration and evolution of the northern extent of the Embudo fault and its adjacent subbasin. We integrate geophysical, borehole, and geologic information to interpret the subsurface configuration of the rift margins formed by the Embudo and Sangre de Cristo faults and the geometry of the subbasin within the Taos embayment. Key features interpreted include (1) an imperfect D-shaped subbasin that slopes to the east and southeast, with the deepest point ∼2 km below the valley floor located northwest of Taos at ∼36° 26′N latitude and 105° 37′W longitude; (2) a concealed Embudo fault system that extends as much as 7 km wider than is mapped at the surface, wherein fault strands disrupt or truncate flows of Pliocene Servilleta Basalt and step down into the subbasin with a minimum of 1.8 km of vertical displacement; and (3) a similar, wider than expected (5–7 km) zone of stepped, west-down normal faults associated with the Sangre de Cristo range front fault. From the geophysical interpretations and subsurface models, we infer relations between faulting and flows of Pliocene Servilleta Basalt and older, buried basaltic rocks that, combined with geologic mapping, suggest a revised rift history involving shifts in the locus of fault activity as the Taos subbasin developed. We speculate that faults related to north-striking grabens at the end of Laramide time formed the first west-down master faults. The Embudo fault may have initiated in early Miocene southwest of the Taos region. Normal-oblique slip on these early fault strands likely transitioned in space and time to dominantly left-lateral slip as the Embudo fault propagated to the northeast. During and shortly after eruption of Servilleta Basalt, proto-Embudo fault strands were active along and parallel to the modern, NE-aligned Rio Pueblo de Taos, ∼4–7 km basinward of the modern, mapped Embudo fault zone. Faults along the northeastern subbasin margin had northwest strikes for most of the period of subbasin formation and were located ∼5–7 km basinward of the modern Sangre de Cristo fault. The locus of fault activity shifted to more northerly striking faults within 2 km of the modern range front sometime after Servilleta volcanism had ceased. The northerly faults may have linked with the northeasterly proto-Embudo faults at this time, concurrent with the development of N-striking Los Cordovas normal faults within the interior of the subbasin. By middle Pleistocene(?) time, the Los Cordovas faults had become inactive, and the linked Embudo–Sangre de Cristo fault system migrated to the south, to the modern range front.

New Mexico↗
USGS2016

Geologic map and cross sections of the Embudo Fault Zone in the Southern Taos Valley, Taos County, New Mexico

The southern Taos Valley encompasses the physiographic and geologic transition zone between the Picuris Mountains and the San Luis Basin of the Rio Grande rift. The Embudo fault zone is the rift transfer structure that has accommodated the kinematic disparities between the San Luis Basin and the Española Basin during Neogene rift extension. The eastern terminus of the transfer zone coincides with the intersection of four major fault zones (Embudo, Sangre de Cristo, Los Cordovas, and Picuris-Pecos), resulting in an area of extreme geologic and hydrogeologic complexities in both the basin-fill deposits and the bedrock. Although sections of the Embudo fault zone are locally exposed in the bedrock of the Picuris Mountains and in the late Cenozoic sedimentary units along the top of the Picuris piedmont, the full proportions of the fault zone have remained elusive due to a pervasive cover of Quaternary surficial deposits. We combined insights derived from the latest geologic mapping of the area with deep borehole data and high-resolution aeromagnetic and gravity models to develop a detailed stratigraphic/structural model of the rift basin in the southern Taos Valley area. The four fault systems in the study area overlap in various ways in time and space. Our geologic model states that the Picuris-Pecos fault system exists in the basement rocks (Picuris formation and older units) of the rift, where it is progressively down dropped and offset to the west by each Embudo fault strand between the Picuris Mountains and the Rio Pueblo de Taos. In this model, the Miranda graben exists in the subsurface as a series of offset basement blocks between the Ponce de Leon neighborhood and the Rio Pueblo de Taos. In the study area, the Embudo faults are pervasive structures between the Picuris Mountains and the Rio Pueblo de Taos, affecting all geologic units that are older than the Quaternary surficial deposits. The Los Cordovas faults are thought to represent the late Tertiary to Quaternary reactivation of the old and deeply buried Picuris-Pecos faults. If so, then the Los Cordovas structures may extend southward under the Picuris piedmont, where they form growth faults as they merge downward into the Picuris-Pecos bedrock faults. The exceptionally high density of cross-cutting faults in the study area has severely disrupted the stratigraphy of the Picuris formation and the Santa Fe Group. The Picuris formation exists at the surface in the Miranda and Rio Grande del Rancho grabens, and locally along the top of the Picuris piedmont. In the subsurface, it deepens rapidly from the mountain front into the rift basin. In a similar manner, the Tesuque and Chamita Formations are shallowly exposed close to the mountain front, but are down dropped into the basin along the Embudo faults. The Ojo Caliente Sandstone Member of the Tesuque Formation appears to be thickest in the northwestern study area, and thins toward the south and the east. In the study area, the Lama formation thins westward and southward. The Servilleta Basalt is generally thickest to the north and northwest, thins under the Picuris piedmont, and terminates along a major, linear, buried strand of the Embudo fault zone, demonstrating that the Servilleta flows were spatially and temporally related to Embudo fault activity.

New Mexico↗
USGS2015

Preliminary geophysical interpretations of regional subsurface geology near the Questa Mine Tailing Facility and Guadalupe Mountain, Taos County, New Mexico

This report presents geophysical interpretations of regional subsurface geology in the vicinity of the Tailing Facility of the Questa Mine near Guadalupe Mountain, Taos County, New Mexico, in cooperation with the New Mexico Environment Department. The interpretations were developed from aeromagnetic data, regional gravity data, data from four ground magnetic traverses, geologic mapping, a digital elevation model, and information from a few shallow wells. The resolution of the geophysical data is only appropriate for a broad assessment of the regional setting. Aeromagnetic data provided the most comprehensive information for interpretation. Qualitative and semiquantitative interpretations indicate the nature and extent of volcanic rocks, their relative depths, and inferred contacts between them, as well as conjectured locations of faults. In particular, the aeromagnetic data indicate places where volcanic rocks extend at shallow depths under sedimentary cover. Trachydacites of Guadalupe Mountain are magnetic, but their associated aeromagnetic anomalies are opposite in sign over the northern versus the southern parts of the mountain. The difference indicates that lavas erupted during different magnetic-polarity events in the north (reverse polarity) versus the south (normal polarity) and therefore have different ages. We postulate a buried volcano with reverse-polarity magnetization lies under the northeast side of Guadalupe Mountain, which likely predated the exposed trachydacites. Faults interpreted for the study area generally align with known fault zones. We interpret a northern extension to one of these faults that crosses northwesterly underneath the Tailing Facility. Gravity data indicate that Guadalupe Mountain straddles the western margin of a subbasin of the Rio Grande rift and that significant (>400 meters) thicknesses of both volcanic and sedimentary rocks underlie the mountain.

New Mexico↗