Geology topics

Atul K. Varma

Publications and source records attributed to Atul K. Varma.

3 recordsLinked to original sources

USGS2025

Component identification of solid biomass fuels using reflected light microscopy: Interlaboratory study 2

As nations transition toward sustainable energy systems , biomass has become a vital component of global energy portfolios. Derived from organic materials such as wood, agricultural residues, forestry byproducts, and organic waste, biomass is a renewable energy source with significant environmental and economic benefits. Responsible biomass energy production can improve waste management, reduce emissions of greenhouse gases, and mitigate environmental pollution. However, as the diversity of biomass-derived fuels increases, robust quality assessment methods are essential to ensure their efficiency, safety, and minimal environmental impact. Reflected light microscopy (RLM) is one such technique with the potential to complement conventional physico-chemical analyses by enabling a rapid identification of material constituents and impurities. To refine this methodology and evaluate the reproducibility of solid biomass component identification using RLM, an interlaboratory study (ILS) was conducted. The study involved the recognition of 58 components across 45 photomicrographs, with the participation of 65 scientists and students from 25 countries. The participants faced high difficulty identifying some of the marked components, and as a result, the percentage of correct answers ranged from 19.0 % to 98.3 %, with an average correct identification rate of 62.7 %. The most challenging aspects of the identification process included distinguishing between woody and non-woody (agro) biomass, accurately identifying petroleum-derived materials, and differentiating agro biomass from inorganic matter. The results suggest that while RLM is an important tool for characterizing solid biomass, further development of methodology guidelines and training are necessary to enhance its effectiveness. Future research should prioritize preparing detailed, image-rich, microscopic morphological descriptions of biomass fuel components, which could improve the accuracy and reliability of using RLM in biomass fuel characterization.

International Journal of Coal Geology↗

USGS2025

Reaction kinetics and accelerant effects of sulfides in early mature hydrocarbon generation using hydrous pyrolysis

Hydrocarbon generation in organic-rich sediments is influenced by the molecular organic composition and relative abundance of associated minerals. Certain mineral-derived elements act as catalysts and reaction intermediaries, facilitating early-stage hydrocarbon formation in potential source rocks. This study investigated the role of sulfur contributed from pyrite as an accelerant in thermal reaction, focusing on its effects on early maturation and consequent hydrocarbon generation from gilsonite (low-sulfur solid petroleum). Hydrous pyrolysis (HP) experiments were conducted on mixtures of gilsonite and pyrite in varying ratios (1:0.1, 1:0.5, 1:1, 1:2, and 1:10 w/w gilsonite:pyrite) at 320, 350, and 370 °C for 72 h. Untreated and thermally altered residues were analyzed using solid bitumen reflectance (BR o , %), total organic carbon (TOC) content, programmed temperature pyrolysis, scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), and X-ray diffraction (XRD) to evaluate the potential accelerant role of pyritic sulfur in hydrocarbon formation. The results show HP residues at 320 and 350 °C with greater pyrite concentrations had higher BR o , while reflectance values were similar in the 370 °C residues, regardless of pyrite concentration, suggesting enhanced reaction at lower thermal conditions. Increasing pyrite content systematically decreased hydrogen index (HI) values while increasing the transformation ratio (TR) and production index (PI), indicating enhanced conversion of organic matter to hydrocarbons with increasing pyrite concentrations. Gas yields increased with pyrite addition, particularly at 350 °C, confirming secondary cracking effects. However, gas production stabilized or declined at higher pyrite loadings (1:10), suggesting alternative reaction pathways such as coke formation. Our data indicate the presence of pyrite lowers the activation energy for thermal cracking, shifting peak experimental hydrocarbon generation temperatures downward by 20–30 °C, with the most pronounced accelerant effects observed at moderate pyrite concentrations (1:0.5 and 1:1). The thermodynamic framework reveals that pyrite stability is influenced by experimental conditions, with pyrrhotite formation favored in the presence of gilsonite due to reduced oxygen fugacity. Pyrite transformation to pyrrhotite, as observed through XRD, SEM-EDS, and predicted by thermodynamic data, further supports the accelerant role of S, as pyrrhotite exhibits a higher hydrogen transfer potential, promoting early oil generation. These findings highlight the importance of pyrite in modulating hydrocarbon generation pathways in organic-rich systems.

Journal of Analytical and Applied Pyrolysis↗

USGS2022

Maturation study of vitrinite in carbonaceous shales and coals: Insights from hydrous pyrolysis

The presence of vitrinite in sedimentary rocks of post-Silurian age allows its reflectance to be used to estimate the thermal maturation of organic matter in petroleum systems. Increasing reflectance of vitrinite, which is primarily driven by aromaticity, depends primarily on the time and temperature attributes of its evolutionary pathway. This study evaluated carbonaceous shales proximal to coal measures and coal samples via isothermal hydrous pyrolysis (HP) to compare differences in the maturation pathways of vitrinite. Sample residues were analysed via vitrinite reflectance (VRo), geochemical screening tests (organic carbon and programmed temperature pyrolysis), and infrared spectroscopy. The study included samples from Indian and North American basins, to observe differences in vitrinite evolution with respect to enclosing mineral matrix, starting degree of aromaticity, organic matter types, stratigraphic age, and depositional environment. The organic content of HP residues shows an intuitive response to the thermal stress of HP, e.g., a general depletion of total organic carbon (TOC) content, pyrolyzate (S2), and hydrogen index with increasing HP temperature. Infrared proxies including C-factor and CH2/CH3 generally decrease with increasing thermal maturity indicating loss of O via CO2 generation and the thermal cracking of aliphatic organic matter. Tmax, production index (PI), and VRo show intuitive increasing values with respect to HP temperature. The least mature sample (0.48 ± 0.05% VRo) generally experienced the maximum change in these parameters during maturation, whereas the most mature sample (0.99 ± 0.06% VRo) generally showed the least change. This observation is consistent with higher kinetic barriers to reaction in more aromatic vitrinite which contains higher bond dissociation energies. Devolatilization of vitrinite during HP causes formation of gas evacuation vacuoles and contraction cracks in the vitrinite grains of both coal and carbonaceous shale. Similarities in vitrinite response to HP between coal and carbonaceous shale suggest that thermal evolution of the vitrinite maceral is principally controlled by inherent rate-limiting kinetic parameters related to its molecular structure. Whereas, the stratigraphic age, sedimentary environment, surrounding organic matter, lithology, and catalysis by mineral composition have less effect. To further improve our understanding of vitrinite aromatization and kinetic parameters, future studies of vitrinite reflectance thermal evolution with temperature should include coal and carbonaceous shale from the same stratigraphic section and extant woody tissue from modern vascular plants.

International Journal of Coal Geology↗