Search USGS⌕ Search

Geology topics

Anne E. McCafferty

Publications and source records attributed to Anne E. McCafferty.

At least 19 recordsLinked to original sources
USGS2025

Airborne geophysics for geologic mapping of critical mineral systems in the United States southern midcontinent

The increased demand for clean energy technology and a significant reliance on foreign supply chains have given impetus to understanding critical mineral systems and locating potential resources within the United States. At least thirteen critical mineral-bearing systems have been identified throughout the U.S. southern Midcontinent (Hofstra and Kreiner, 2020) but much of the region’s geologic framework is concealed by vegetation and sedimentary cover that hinder traditional geologic mapping efforts. Airborne geophysical data provide an effective way to overcome these obstacles and to provide additional insight into the deeper structures that underlie shallow mineralization. However, legacy airborne magnetic and radiometric data were collected using now-outdated instruments and methods, inconsistent survey parameters, and large flight-line spacings resulting in low-resolution data that present challenges to regional-scale study and interpretation. Over the last decade, the U.S. Geological Survey Earth Mapping Resources Initiative (EMRI) and National Cooperative Geologic Mapping Program have conducted a series of high-resolution airborne magnetic and radiometric surveys across the southern Midcontinent (Fig. 1) as part of an effort to improve understanding of the geophysical framework and natural resource potential in the region. These surveys are designed using modern survey methods and instruments with consistent parameters for flight-line spacing and flight height relative to magnetic sources. The EMRI airborne surveys are planned in collaboration with State geological surveys based on focus areas (Dicken et al., 2022) according to the presence of or potential for critical mineral deposits. High-resolution airborne magnetic and radiometric data cover focus areas such as the southeast Missouri iron metallogenic province and South-Central iron-oxide-apatite (IOA) – iron-oxide-copper-gold (IOCG) province, the Magnet Cove alkaline-carbonatite complex, the Midwest Permian ultramafic dike district, the Illinois-Kentucky fluorspar district, and several Mississippi Valley-type lead-zinc deposits and districts (Fig. 1). These focus areas represent known deposits or prospective host systems of critical minerals including rare earth elements (REEs), platinum-group elements (PGEs), cobalt, lithium, fluorspar, niobium, titanium, vanadium, lead, zinc, gallium, germanium, and many more. Other significant geologic and geophysical features covered include the Reelfoot rift, the New Madrid seismic zone, the Illinois basin, the Arkoma basin, the South-Central magnetic lineament, and the Kentucky-Tennessee magnetic anomaly (Fig. 1). This presentation focuses on new airborne magnetic and radiometric data with continuous coverage across parts of six states, preliminary interpretations, examples of geologic mapping applications, and discussion of newly discovered magnetic anomalies and follow-up investigations.

Conference Paper↗
USGS2025

Airborne geophysical efforts for critical mineral systems mapping in the southern Midcontinent, USA

The increasing global demand for critical minerals to support energy and technological advancement has accelerated exploration and research efforts for these essential resources. Since 2019, the United States Geological Survey (USGS) Earth Mapping Resources Initiative (EMRI) has worked to modernize geologic mapping of the Nation to better understand its critical mineral resources. To further this initiative, the USGS has flown a series of high-resolution airborne magnetic and radiometric surveys over large areas of the southern Midcontinent. The surveys cover known critical mineral deposits and areas with the potential to host additional critical minerals based on the presence of one or more overlapping mineral systems. One aspect of EMRI emphasizes close collaboration between the USGS and the Association of American State Geologists, as well as other government and industry partners to leverage geophysical, geological, and geochemical expertise on both regional and local scales. The EMRI high-resolution airborne survey data provide new insights into the geophysical framework of the southern Midcontinent and its critical mineral endowment. Additionally, discoveries made from the data have directed new studies for critical mineral exploration.

southern Midcontinent↗
USGS2024

Influence of inherited structure on flexural extension in foreland basin systems: Evidence from the northern Arkoma basin and southern Ozark dome, USA

Extensional faults are key components of foreland basin systems. They form within the upper crust in response to flexure of the lithosphere and accommodate subsidence within the foredeep and forebulge depozones. Such faults are excellent proxies for orogenic system evolution and control the distribution of natural resources and hazards. However, the spatiotemporal evolution of flexural extension has not been documented previously at a regional scale, thereby limiting our understanding of underlying geodynamic controls. Here, we resolve late Paleozoic flexural extension in the northern Arkoma basin and southern Ozark dome, USA. We synthesize a large database of previous mapping, existing research, subsurface data, and geophysical data into 3D geologic and 2D kinematic models. Mesh surfaces representing several key horizons from the Carboniferous Period (ca. 335-306 Ma) were constructed. These surfaces were built from oil and gas well tops (n = ∼10,000) and surface geologic map contacts using an advanced kriging method. The mesh surfaces are offset by a complex 3D fault network, allowing detailed analysis of along-strike and down-dip variations in fault displacement. Analysis of the 3D model reveals a regular and repeated fault segmentation pattern wherein E -W striking, left- and foreland-stepping en échelon normal faults are segmented by inherited NE striking basement faults. Maximum vertical separation along the E -W normal faults is generally focused between the inherited NE-trending faults. This suggests that the inherited basement faults delocalized extensional strain during late Paleozoic normal faulting. Maximum vertical separation and fault localization may correlate to areas with high-amplitude positive magnetic anomalies interpreted as Mesoproterozoic granitic rocks. Speculative covariance of magnetic anomalies and fault displacements implies that the relatively strong basement granite concentrated stress, leading to localized faulting within the relatively thin sedimentary cover. Lastly, we show that flexural extension migrated southeast to northwest from the Chesterian-Morrowan (ca. 335-319 Ma) to the Desmoinesian (ca. 306 Ma). The migratory flexural extension may be explained by diachronous loading during Pangean assembly, or by synchronous loading but variable load compensation due to inherent factors.

Arkansas, Oklahoma↗
USGS2023

National- to continental-scale governmental geophysical efforts for critical mineral mapping, USA

The U.S. Geological Survey (USGS) has established robust collaborations with domestic state and international geological surveys to provide geophysical and other types of earth science data that act to underpin critical mineral research efforts across the United States, Canada, and Australia. The Earth Mapping Resource Initiative (EMRI) is a national-scale collaborative effort with state geological surveys to improve geophysical and geological data to advance our understanding of the United States’ critical mineral endowment. The Critical Mineral Mapping Initiative (CMMI) is a tri-national collaboration with the federal geological surveys of Canada and Australia to conduct research that will aid in identifying new areas with potential for critical mineral deposits across all three countries. This study describes the important interplay between the EMRI and CMMI and how each act in a complementary fashion to advance critical mineral research. We present examples that illustrate how magnetic anomaly data are used to define critical mineral prospectivity for Mississippi Valley-type (MVT) Zn-Pb mineral systems and illustrate how CMMI magnetic derivative maps were considered into USGS’ EMRI efforts to acquire modern high-resolution airborne geophysical data over a large area within the US Midcontinent.

Conference Paper↗
USGS2022

Zinc on the edge—Isotopic and geophysical evidence that cratonic edges control world-class shale-hosted zinc-lead deposits

The North Australian Zinc Belt is the largest zinc-lead province in the world, containing three of the ten largest known individual deposits (HYC, Hilton-George Fisher, and Mount Isa). The Northern Cordillera in North America is the second largest zinc-lead province, containing a further two of the world’s top ten deposits (Red Dog and Howards Pass). Despite this world-class endowment, exploration in both mineral provinces during the past 2 decades has not been particularly successful, yielding only two significant discoveries (Teena, Australia, and Boundary, Canada). One of the most important aspects of exploration is to choose mineral provinces and districts within geological belts that have the greatest potential for discovery. Here, we present results from these two zinc belts that highlight previously unused datasets for area selection and targeting. Lead isotope mapping using analyses of mineralized material has identified gradients in μ ( 238 U/ 204 Pb) that coincide closely with many major deposits. Locations of these deposits also coincide with a gradient in the depth of the lithosphere-asthenosphere boundary determined from calibrated surface wave tomography models converted to temperature. Furthermore, gradients in upward-continued gravity anomalies and a step in Moho depth correspond to a pre-existing major crustal boundary in both zinc belts. A spatial association of deposits with a linear mid- to lower-crustal resistivity anomaly from magnetotelluric data is also observed in the North Australian Zinc Belt. The change from thicker to thinner lithosphere is interpreted to localize prospective basins for zinc-lead mineralization and to control the gradient in lead isotope and geophysical data. These data, when combined with data indicative of paleoenvironment and changes in plate motion at the time of mineralization, provide new exploration criteria that can be used to identify prospective mineralized basins and define the most favorable parts of these basins.

Mineralium Deposita↗
USGS2022

Focus areas for data acquisition for potential domestic resources of 13 critical minerals in the conterminous United States and Puerto Rico — Antimony, barite, beryllium, chromium, fluorspar, hafnium, helium, magnesium, manganese, potash, uranium, vanadium, and zirconium

The Earth Mapping Resources Initiative (Earth MRI) is conducted in phases to identify areas for acquiring new geologic framework data to identify potential domestic resources of the 35 mineral materials designated as critical minerals for the United States. This report describes the data sources and summary results for 13 critical minerals evaluated in the conterminous United States and Puerto Rico during phase 3 of the study (antimony, barite, beryllium, chromium, fluorspar, hafnium, helium, magnesium, manganese, potash, uranium, vanadium, and zirconium). Phases 1 and 2 of the Earth MRI addressed aluminum, cobalt, graphite, lithium, niobium, platinum-group elements (PGEs), rare earth elements (REEs), tantalum, tin, titanium, and tungsten. Critical minerals in Alaska are covered in a separate report. No focus areas for phase 3 critical minerals are delineated for Hawaii. The geologic, geochemical, topographic, and geophysical mapping provided by the Earth MRI documents geologic features that reflect the extent of individual mineral systems and provides information about critical mineral deposits that may not have been previously considered. The mineral-systems approach links critical mineral commodities to deposit types that represent the manifestations of large mineral systems. Each of the 13 critical mineral commodities for phase 3 of the Earth MRI is discussed in terms of its importance to the Nation’s economy, modes of occurrence, mineral systems, and deposit types, and is accompanied by maps and tables listing examples of focus areas in the conterminous United States and Puerto Rico. Examples of important mineral systems for this group of 13 critical minerals include basin brine path systems for barite and fluorspar, Carlin-type systems and Coeur d’Alene systems for antimony, chemical weathering and volcanogenic seafloor systems for manganese, Climax-type systems for beryllium, mafic magmatic systems for chromium, marine evaporite systems for potash and magnesium, meteoric recharge systems for uranium, petroleum systems for helium, and placer systems for zirconium and hafnium.

Open-File Report↗
USGS2022

Data-driven prospectivity modelling of sediment-hosted Zn-Pb mineral systems and their critical raw materials

Demand for critical raw materials is expected to accelerate over the next few decades due to continued population growth and the shifting consumption patterns of the global economy. Sedimentary basins are important sources for critical raw materials and new discoveries of sediment–hosted Mississippi Valley–type (MVT) and/or clastic–dominated (CD) Zn–Pb deposits are likely required to mitigate future supply chain disruptions for Zn, Pb, Ag, Cd, Ga, Ge, Sb, and In. Herein we integrate public geoscience datasets using a discrete global grid to system to model the mineral potential for MVT and CD deposits across Canada, the United States of America, and Australia. Statistical analysis of the model results demonstrates that surface–wave tomography and derivative products from satellite gravity datasets can be used to map the most favourable paleo–tectonic settings of MVT and CD deposits inboard of orogenic belts and at the rifted edges of cratonic lithosphere, respectively. Basin development at pre–existing crustal boundaries was likely important for maintaining the low geothermal–gradients that are favourable for metal transport and generating the crustal fluid pathways that were reactivated during ore–formation, as suggested by the statistical association of both sediment–hosted mineral deposit types with the edges of upward–continued gravity and long–wavelength magnetic anomalies. Multivariate statistical analysis demonstrates that the most prospective combination of these geophysical datasets varies for each geological region and deposit type. We further demonstrate that maximum and minimum geological ages, coupled with Phanerozoic paleogeographic reconstructions, represent mappable proxies for the availability of oxidized, brine–generating regions that are the most likely source of ore–forming fluids (e.g., low– to mid–latitude carbonate platforms and evaporites). Ore deposition was likely controlled by interaction between oxidized, low–temperature brines and sulfidic and/or carbonaceous rocks, which, in some cases, can be mapped at the exposed surface or identified using the available rock descriptions. Baseline weights–of–evidence models are based on regional geophysics and are the least impacted by missing surface information but yield relatively poor results, as demonstrated by the low area–under–the–curve (AUC) for the spatially independent test set on the success–rate plot (AUC = 0.787 for MVT and AUC = 0.870 for CD). Model performance can be improved by: (1) using advanced methods that were trained and validated during a series of semi–automated machine learning competitions; and/or (2) incorporating geological and geophysical datasets that are proxies for each component of the mineral system. The best–performing gradient boosting machine models yield higher AUC for the test set (AUC = 0.983 for MVT and AUC = 0.991 for CD) and reduce the search space by >94%. The model results highlight the potential benefits of mapping sediment–hosted mineral systems at continental scale to improve mineral exploration targeting for critical raw materials.

Ore Geology Reviews↗
USGS2021

Data-driven prospectivity modelling of sediment-hosted mineral systems

Mississippi Valley-type (MVT) and clastic-dominated (CD) deposits are important sources for Zn, Pb, Ag, and Cd as well as the critical elements Ga, Ge, In, and Sb. However, mapping the drivers, sources, pathways, and traps of MVT and CD deposits within the much larger and mostly unmineralized sedimentary basins remain some of the least understood aspects of these mineral systems. Herein we address those knowledge gaps by integrating public geoscience datasets from Canada, the United States of America, and Australia using a discrete global grid system to map the continent-scale footprints of MVT and CD deposits.

Conference Paper↗
USGS2020

Focus areas for data acquisition for potential domestic resources of 11 critical minerals in the conterminous United States, Hawaii, and Puerto Rico—Aluminum, cobalt, graphite, lithium, niobium, platinum-group elements, rare earth elements, tantalum, tin, titanium, and tungsten

In response to a need for information on potential domestic sources of critical minerals, the Earth Mapping Resources Initiative (Earth MRI) was established to identify and prioritize areas for acquisition of new geologic mapping, geophysical data, and elevation data to improve our knowledge of the geologic framework of the United States. Phase 1 of Earth MRI concentrated on those geologic terranes favorable for hosting the rare earth elements (REEs). Phase 2 continued to address the REEs and also identified focus areas for potential domestic sources of 10 more of the 35 critical minerals on the U.S. critical minerals list (aluminum, cobalt, graphite, lithium, niobium, platinum-group elements, tantalum, tin, titanium, tungsten). This report describes the methodology, data sources, and summary results for mineral systems that host these 11 critical minerals in the conterminous United States, Hawaii, and Puerto Rico; Alaska is covered in a separate report. The mineral systems framework adopted for this study links critical mineral commodities to families of genetically related mineral deposit types. The mineral systems approach is an efficient approach, providing a simultaneous evaluation of geologic terranes through aggregation of genetically related mineral deposit types that are much larger than individual ore deposits. Geologic, geochemical, topographic, and geophysical mapping provided by Earth MRI will document geologic features that reflect the extent of individual mineral systems and provide information about critical mineral deposits that may not have been recognized previously. Each critical mineral commodity is discussed in terms of importance to the Nation’s economy, modes of occurrence, mineral systems, and deposit types along with maps and tables listing examples of focus areas for each critical mineral. Important mineral systems for these critical minerals include chemical weathering systems for aluminum (bauxite); placer systems for titanium and REEs; metamorphic systems for graphite; mafic magmatic systems for platinum-group elements and cobalt; lacustrine evaporite and porphyry tin systems for lithium; and copper-molybdenum-gold (Cu-Mo-Au) systems for tungsten. REEs occur in many different mineral systems. Focus areas were developed by scientists from the U.S. Geological Survey in collaboration with scientists from State geological surveys and other institutions. This first national-scale compilation of focus areas represents an initial step in addressing the Nation’s critical mineral needs by screening areas for acquisition of new data to provide the geologic framework necessary for identifying domestic sources of critical minerals.

Open-File Report↗
USGS2019

Crustal architecture beneath the southern Midcontinent (USA) and controls on Mesoproterozoic iron-oxide mineralization from 3D geophysical models

Several types of critical mineral-bearing ore deposits in the southern Midcontinent region of the U.S. are hosted in Mesoproterozoic igneous rocks largely concealed beneath Paleozoic cover. Discerning the architecture of igneous intrusions and volcanic centers in the crust is fundamental to understanding the geologic evolution of this vast region and its mineral resources. To advance the understanding of the geologic framework beneath the Southeast Missouri Iron Metallogenic Province, we invert continental-scale magnetic and gravity anomaly data to three-dimensional (3D) physical property models. The regional models image altered and mineralized igneous rocks near the Precambrian basement surface and underlying intrusive complexes that extend down to the Moho. At shallow crustal levels, our models confirm that iron oxide-apatite ± rare earth element (IOA±REE) deposits and iron oxide-copper-gold ± cobalt (IOCG) deposits occur within or near the edges of large low density/low susceptibility early Mesoproterozoic (ca 1.4 Ga) silicic calderas and (ca 1.3 Ga) granitic plutons. Previous isotopic and geochemical studies conclude that the iron deposits and their volcanic host rocks originated from mantle-derived and crustal melts that erupted during regional extension. Extension was associated with thermal event(s) that produced the large-scale silicic magmatism related to the ca 1.45 Ga Eastern Granite Rhyolite Province (EGRP) and the 1.35 Ga Southern Granite Rhyolite Province (SGRP). We postulate that early in the evolution of the EGRP, several trans-crustal magmatic plumbing systems developed that are evident in the 3D models. The Southeast Missouri Metallogenic Province is underlain by one such magmatic system that is expressed as a northwest-trending ~ 50 km-wide by 200 km-long elongate track of high susceptibility at deep crustal levels. The high susceptibility corridor splays upward through the crust to the Precambrian surface where the iron deposits are the epigenetic manifestation of this magmatic event. Our findings confirm that the iron deposits, with no distinct connection at the surface, are connected to one large magmatic system at depth. We propose that other similar susceptibility tracks, which are present along the top of the mantle, mark additional feeder zones that allowed magma to ascend to the main eruptive centers that produced the Granite Rhyolite Provinces. The early Mesoproterozoic extensional tectonic framework established crustal-scale pathways that controlled the distribution of subsequent magmatic activity, including the ca 1.4 Ga calderas and underlying intrusions, ca 1.3 Ga silicic plutons and Phanerozoic alkaline intrusions. If these interpretations are correct, our study has identified large areas that are prospective for critical mineral-bearing ore deposits and, importantly, suggests that the Mesoproterozoic architecture may have influenced subsequent magmatism and hydrothermal activity in the southern Midcontinent of the U.S.

Ore Geology Reviews↗
USGS2019

The US Geological Survey’s Earth Mapping Resources Initiative (Earth MRI)—Providing framework geologic, geophysical, and elevation data to the nation’s critical mineral-bearing regions

New detailed mapping of the geologic resources of the Nation has the potential to significantly close the gap in the essential data needed to fuel a modern era of economic development and technological innovation, while at the same time dramatically enhancing our understanding of the fundamental way geology impacts everyday life, from the domestic critical mineral resources that are necessary for modern technology and the economy, to domestic energy and water resources, geologic hazards, agriculture, and other pressing needs. The U.S. Geological Survey established the Earth Resources Mapping Initiative (Earth MRI) to address the shortfall in geologic, geophysical, and elevation data with sufficient detail to support evaluation of regions in the United States that have potential to host critical mineral resources. The new effort is a collaboration with the Association of American State Geologists, who are providing new detailed geologic maps and making available online archived data and information related to critical mineral resources. The geophysical and lidar surveys are being contracted through industry specialists to assure that high-quality data are available to the public. This article provides an overview of the Earth MRI effort with discussions on the initial geophysical surveys funded for areas that have known potential for rare earth element resources. Subsequent projects are being designed to address areas that may host other critical mineral resources.

Fast Times↗
USGS2016

Magnetic and gravity gradiometry framework for Mesoproterozoic iron oxide-apatite and iron oxide-copper-gold deposits, southeast Missouri, USA

High-resolution airborne magnetic and gravity gradiometry data provide the geophysical framework for evaluating the exploration potential of hidden iron oxide deposits in Mesoproterozoic basement rocks of southeast Missouri. The data are used to calculate mineral prospectivity for iron oxide-apatite (IOA) ± rare earth element (REE) and iron oxide-copper-gold (IOCG) deposits. Results delineate the geophysical footprints of all known iron oxide deposits and reveal several previously unrecognized prospective areas. The airborne data are also inverted to three-dimensional density and magnetic susceptibility models over four concealed deposits at Pea Ridge (IOA ± REE), Boss (IOCG), Kratz Spring (IOA), and Bourbon (IOCG). The Pea Ridge susceptibility model shows a magnetic source that is vertically extensive and traceable to a depth of greater than 2 km. A smaller density source, located within the shallow Precambrian basement, is partly coincident with the magnetic source at Pea Ridge. In contrast, the Boss models show a large (625-m-wide), vertically extensive, and coincident dense and magnetic stock with shallower adjacent lobes that extend more than 2,600 m across the shallow Precambrian paleosurface. The Kratz Spring deposit appears to be a smaller volume of iron oxides and is characterized by lower density and less magnetic rock compared to the other iron deposits. A prospective area identified south of the Kratz Spring deposit shows the largest volume of coincident dense and nonmagnetic rock in the subsurface, and is interpreted as prospective for a hematite-dominant lithology that extends from the top of the Precambrian to depths exceeding 2 km. The Bourbon deposit displays a large bowl-shaped volume of coincident high density and high-magnetic susceptibility rock, and a geometry that suggests the iron mineralization is vertically restricted to the upper parts of the Precambrian basement. In order to underpin the evaluation of the prospectivity and three-dimensional models, an extensive statistical summary of density and apparent magnetic susceptibility measurements is presented that includes data on several hundred samples taken from the deposits, altered wall rocks, and unaltered country rocks.

Missouri↗
USGS2016

Geochemistry, Nd-Pb Isotopes, and Pb-Pb Ages of the Mesoproterozoic Pea Ridge Iron Oxide-Apatite–Rare Earth Element Deposit, Southeast Missouri

Iron oxide-apatite and iron oxide-copper-gold deposits occur within ~1.48 to 1.47 Ga volcanic rocks of the St. Francois Mountains terrane near a regional boundary separating crustal blocks having contrasting depleted-mantle Sm-Nd model ages (T DM ). Major and trace element analyses and Nd and Pb isotope data were obtained to characterize the Pea Ridge deposit, improve identification of exploration targets, and better understand the regional distribution of mineralization with respect to crustal blocks. The Pea Ridge deposit is spatially associated with felsic volcanic rocks and plutons. Mafic to intermediate-composition rocks are volumetrically minor. Data for major element variations are commonly scattered and strongly suggest element mobility. Ratios of relatively immobile elements indicate that the felsic rocks are evolved subalkaline dacite and rhyolite; the mafic rocks are basalt to basaltic andesite. Granites and rhyolites display geochemical features typical of rocks produced by subduction. Rare earth element (REE) variations for the rhyolites are diagnostic of rocks affected by hydrothermal alteration and associated REE mineralization. The magnetite-rich rocks and REE-rich breccias show similar REE and mantle-normalized trace element patterns. Nd isotope compositions (age corrected) show that: (1) host rhyolites have ɛ Nd from 3.44 to 4.25 and T DM from 1.51 to 1.59 Ga; (2) magnetite ore and specular hematite rocks display ɛ Nd from 3.04 to 4.21 and T DM from 1.6 to 1.51 Ga, and ɛ Nd from 2.23 to 2.81, respectively; (3) REE-rich breccias have ɛ Nd from 3.04 to 4.11 and T DM from 1.6 to 1.51 Ga; and (4) mafic to intermediate-composition rocks range in ɛ Nd from 2.35 to 3.66 and in T DM from 1.66 to 1.56. The ɛ Nd values of the magnetite and specular hematite samples show that the REE mineralization is magmatic; no evidence exists for major overprinting by younger, crustal meteoric fluids, or by externally derived Nd. Host rocks, breccias, and magnetite ore shared a common origin from a similar source. Lead isotope ratios are diverse: (1) host rhyolite has 206 Pb/ 204 Pb from 24.261 to 50.091; (2) Pea Ridge and regional galenas have 206 Pb/ 204 Pb from 16.030 to 33.548; (3) REE-rich breccia, magnetite ore, and specular hematite rock are more radiogenic than galena; (4) REE-rich breccias have high 206 Pb/ 204 Pb (38.122–1277.61) compared to host rhyolites; and (5) REE-rich breccias are more radiogenic than magnetite ore and specular-hematite rock, having 206 Pb/ 204 Pb up to 230.65. Radiogenic 207 Pb/ 206 Pb age estimates suggest the following: (1) rhyolitic host rocks have ages of ~1.50 Ga, (2) magnetite ore is ~1.44 Ga, and (3) REE-rich breccias are ~1.48 Ga. These estimates are broadly consistent and genetically link the host rhyolite, REE-rich breccia, and magnetite ore as being contemporaneous. Alteration style and mineralogical or textural distinctions among the magnetite-rich rocks and REE-rich breccias do not correlate with different isotopic sources. In our model, magmatic fluids leached metals from the coeval felsic rocks (rhyolites), which provided the metal source reflected in the compositions of the REE-rich breccias and mineralized rocks. This model allows for the likelihood of contributions from other genetically related felsic and intermediate to more mafic rocks stored deeper in the crust. The deposit thus records an origin as a magmatic-hydrothermal system that was not affected by Nd and Pb remobilization processes, particularly if these processes also triggered mixing with externally sourced metal-bearing fluids. The Pea Ridge deposit was part of a single, widespread, homogeneous mixing system that produced a uniform isotopic composition, thus representing an excellent example of an igneous-dominated system that generated coeval magmatism and REE mineralization. Geochemical features suggest that components in the Pea Ridge deposit originated from sources in an orogenic margin. Basaltic magmatism produced by mantle decompression melting provided heat for extracting melts from the middle or lower crust. Continual addition of mafic magmas to the base of the subcontinental lithosphere, in a back-arc setting, remelted calc-alkaline rocks enriched in metals that were stored in the crust. The St. Francois Mountains terrane is adjacent to the regional T DM line (defined at a value of 1.55 Ga) that separates ~1600 Ma basement to the west, from younger basements to the east. Data for Pea Ridge straddle the T DM values proposed for the line. The Sm-Nd isotope system has been closed since formation of the deposit and the original igneous signatures have not been affected by cycles of alteration or superimposed mineralizing events. No evidence exists for externally derived Nd or Sm. The source region for metals within the Pea Ridge deposit had a moderate compositional variation and the REE-rich breccias and mineralized rocks are generally isotopically homogeneous. The Pea Ridge deposit thus constitutes a distinctive isotopic target for use as a model in identifying other mineralized systems that may share the same metal source in the St. Francois Mountains terrane and elsewhere in the eastern Granite-Rhyolite province.

Missouri↗
USGS2014

Geophysical interpretation of U, Th, and rare earth element mineralization of the Bokan Mountain peralkaline granite complex, Prince of Wales Island, southeast Alaska

A prospectivity map for rare earth element (REE) mineralization at the Bokan Mountain peralkaline granite complex, Prince of Wales Island, southeastern Alaska, was calculated from high-resolution airborne gamma-ray data. The map displays areas with similar radioelement concentrations as those over the Dotson REE-vein-dike system, which is characterized by moderately high %K, eU, and eTh (%K, percent potassium; eU, equivalent parts per million uranium; and eTh, equivalent parts per million thorium). Gamma-ray concentrations of rocks that share a similar range as those over the Dotson zone are inferred to locate high concentrations of REE-bearing minerals. An approximately 1300-m-long prospective tract corresponds to shallowly exposed locations of the Dotson zone. Prospective areas of REE mineralization also occur in continuous swaths along the outer edge of the pluton, over known but undeveloped REE occurrences, and within discrete regions in the older Paleozoic country rocks. Detailed mineralogical examinations of samples from the Dotson zone provide a means to understand the possible causes of the airborne Th and U anomalies and their relation to REE minerals. Thorium is sited primarily in thorite. Uranium also occurs in thorite and in a complex suite of ± Ti ± Nb ± Y oxide minerals, which include fergusonite, polycrase, and aeschynite. These oxides, along with Y-silicates, are the chief heavy REE (HREE)-bearing minerals. Hence, the eU anomalies, in particular, may indicate other occurrences of similar HREE-enrichment. Uranium and Th chemistry along the Dotson zone showed elevated U and total REEs east of the Camp Creek fault, which suggested the potential for increased HREEs based on their association with U-oxide minerals. A uranium prospectivity map, based on signatures present over the Ross-Adams mine area, was characterized by extremely high radioelement values. Known uranium deposits were identified in the U-prospectivity map, but the largest tract occurs over a radioelement-rich granite phase within the pluton that is likely not related to mineralization. Neither mineralization type displays a well-defined airborne magnetic signature.

Alaska↗
USGS2014

A deposit model for carbonatite and peralkaline intrusion-related rare earth element deposits

Carbonatite and alkaline intrusive complexes, as well as their weathering products, are the primary sources of rare earth elements. A wide variety of other commodities have been exploited from carbonatites and alkaline igneous rocks including niobium, phosphate, titanium, vermiculite, barite, fluorite, copper, calcite, and zirconium. Other elements enriched in these deposits include manganese, strontium, tantalum, thorium, vanadium, and uranium. Carbonatite and peralkaline intrusion-related rare earth element deposits are presented together in this report because of the spatial, and potentially genetic, association between carbonatite and alkaline rocks. Although these rock types occur together at many locations, carbonatite and peralkaline intrusion-related rare earth element deposits are not generally found together. Carbonatite hosted rare earth element deposits are found throughout the world, but currently only five are being mined for rare earth elements: Bayan Obo, Daluxiang, Maoniuping, and Weishan deposits in China and the Mountain Pass deposit in California, United States. These deposits are enriched in light rare earth elements, including lanthanum, cerium, praseodynium, and neodynium. The principal rare earth element-minerals associated with carbonatites are fluocarbonates (bastnäsite, parisite, and synchysite), hydrated carbonates (ancylite), and phosphates (monazite) with bastnäsite being the primary ore mineral. Calcite and dolomite are the primary gangue minerals. At present, the only rare earth element production from a peralkaline intrusion-related deposit is as a byproduct commodity at the Lovozero deposit in Russia. Important rare earth element minerals found in various deposits include apatite, eudialyte, loparite, gittinsite, xenotime, gadolinite, monazite, bastnäsite, kainosite, mosandrite, britholite, allanite, fergusonite, and zircon, and these minerals tend to be enriched in heavy rare earth elements. Carbonatite and alkaline intrusive complexes are derived from partial melts of mantle material, and neodymium isotopic data are consistent with the rare earth elements being derived from the parental magma. Deposits and these associated rock types tend to occur within stable continental tectonic units, in areas defined as shields, cratons, and crystalline blocks; they are generally associated with intracontinental rift and fault systems. Protracted fractional crystallization of the magma leads to enrichment in rare earth elements and other incompatible elements. Rare earth element mineralization associated with carbonatites can occur as either primary mineral phases or as mineralization associated with late stage orthomagmatic fluids. Rare earth element mineralization associated with alkaline intrusive complexes may occur as primary phases in magmatic layered complexes or as late-stage dikes and veins. The greatest environmental challenges associated with carbonatite and peralkaline intrusion-related rare earth element deposits center on the associated uranium and thorium. Considerable uncertainty exists around the toxicity of rare earth elements and warrants further investigation. The acid-generating potential of carbonatites and peralkaline intrusion-related deposits is low due to the dominance of carbonate minerals in carbonatite deposits, the presence of feldspars and minor calcite within the alkaline intrusion deposits, and only minor quantities of potentially acid-generating sulfides. Therefore, acid-drainage issues are not likely to be a major concern associated with these deposits. Uranium has the potential to be recovered as a byproduct, which would mitigate some of its environmental effects. However, thorium will likely remain a waste-stream product that will require management since progress is not being made towards the development of thorium-based nuclear reactors in the United States or other large scale commercial uses. Because some deposits are rich in fluorine and beryllium, these elements may be of environmental concern in certain locations.

Scientific Investigations Report↗
USGS2009

Geophysical delineation of Mg-rich ultramafic rocks for mineral carbon sequestration

This presentation covers three general topics: (1) description of a new geologic compilation of the United States that shows the location of magnesium-rich ultramafic rocks in the conterminous United States; (2) conceptual illustration of the potential ways that ultramafic rocks could be used to sequester carbon dioxide; and (3) description of ways to use geophysical data to refine and extend the geologic mapping of ultramafic rocks and to better characterize their mineralogy. The geophysical focus of this research is twofold. First, we illustrate how airborne magnetic data can be used to map the shallow subsurface geometry of ultramafic rocks for the purpose of estimating the volume of rock material available for mineral CO 2 sequestration. Secondly, we explore, on a regional to outcrop scale, how magnetic mineralogy, as expressed in magnetic anomalies, may vary with magnesium minerals, which are the primary minerals of interest for CO 2 sequestration.

Open-File Report↗
USGS2006

Magnetic properties, acid neutralization capacity, and net acid production of rocks in the Animas River Watershed Silverton, Colorado

Federal land managers along with local stakeholders in the Upper Animas River watershed near Silverton, Colorado are actively designing and implementing mine waste remediation projects to mitigate the effects of acid mine drainage from several abandoned hard rock metal mines and mills. Local source rocks with high acid neutralization capacity (ANC) within the watershed are of interest to land managers for use in these remediation projects. A suite of representative samples was collected from propylitic to weakly sericitic-altered volcanic and plutonic rocks exposed in outcrops throughout the watershed. Acid-base accounting laboratory methods coupled with mineralogic and geochemical characterization provide insight into lithologies that have a range of ANC and net acid production (NAP). Petrophysical lab determinations of magnetic susceptibility converted to estimates for percent magnetite show correlation with the environmental properties of ANC and NAP for many of the lithologies. A goal of our study is to interpret watershed-scale airborne magnetic data for regional mapping of rocks that have varying degrees of ANC and NAP. Results of our preliminary work are presented here.

Conference Paper↗