Search USGS⌕ Search

Geology topics

Alfred S. McEwen

Publications and source records attributed to Alfred S. McEwen.

At least 73 records · Page 4Linked to original sources

High Resolution Imaging Science Experiment (HiRISE) observations of glacial and periglacial morphologies in the circum-Argyre Planitia highlands, Mars

The landscape of the Argyre Planitia and adjoining Charitum and Nereidum Montes in the southern hemisphere of Mars has been heavily modified since formation of the Argyre impact basin. This study examines morphologies in the Argyre region revealed in images acquired by the High Resolution Imaging Science Experiment (HiRISE) camera and discusses the implications for glacial and periglacial processes. Distinctive features such as large grooves, semicircular embayments in high topography, and streamlined hills are interpreted as glacially eroded grooves, cirques, and whalebacks or roche moutonnée, respectively. Large boulders scattered across the floor of a valley may be ground moraine deposited by ice ablation. Glacial interpretations are supported by the association of these features with other landforms typical of glaciated landscapes such as broad valleys with parabolic cross sections and stepped longitudinal profiles, lobate debris aprons interpreted as remnant debris covered glaciers or rock glaciers, and possible hanging valleys. Aligned boulders observed on slopes may also indicate glacial processes such as fluting. Alternatively, boulders aligned on slopes and organized in clumps and polygonal patterns on flatter surfaces may indicate periglacial processes, perhaps postglaciation, that form patterned ground. At least portions of the Argyre region appear to have been modified by processes of ice accumulation, glacial flow, erosion, sediment deposition, ice stagnation and ablation, and perhaps subsequent periglacial processes. The type of bedrock erosion apparent in images suggests that glaciers were, at times, wet based. The number of superposed craters is consistent with geologically recent glacial activity, but may be due to subsequent modification.

Journal of Geophysical Research E: Planets↗

Seasonally active frost-dust avalanches on a north polar scarp of Mars captured by HiRISE

North-polar temporal monitoring by the High Resolution Imaging Science Experiment (HiRISE) orbiting Mars has discovered new, dramatic examples that Mars1 CO2-dominated seasonal volatile cycle is not limited to quiet deposition and sublimation of frost. In early northern martian spring, 2008, HiRISE captured several cases of CO2 frost and dust cascading down a steep, polar scarp in discrete clouds. Analysis of morphology and process reveals these events to be similar to terrestrial powder avalanches, sluffs, and falls of loose, dry snow. Potential material sources and initiating mechanisms are discussed in the context of the Martian polar spring environment and of additional, active, aeolian processes observed on the plateau above the scarp. The scarp events are identified as a trigger for mass wasting of bright, fractured layers within the basal unit, and may indirectly influence the retreat rate of steep polar scarps in competing ways.

Geophysical Research Letters↗

Relative age of interior layered deposits in southwest Candor Chasma based on high-resolution structural mapping

High‐resolution topography generated from stereo HiRISE (High‐Resolution Imaging Science Experiment) imagery reveals the meter‐scale structure of interior layered deposits (ILD) in southwest Candor Chasma. This study seeks to determine the age of the local ILD relative to any normal faults that can be attributed to chasma formation. The study area is located near the contact of these ILD and the wall rock and is in an area where chasma‐forming normal faults have been proposed. We find that while normal faults are found in the study area, these faults are not sufficiently large nor appropriately located or oriented to accommodate the roughly northeast‐southwest extension that is required for normal faults that can be attributed to chasma formation. Additionally, bedding exposed in the local ILD generally dips toward the center of Candor Chasma, consistent with sediment deposition in a preexisting basin. Further, pit craters of Tithonia Catena, presumed to predate or be contemporaneous with the formation of west Candor Chasma, do not cut into the ILD within the study area. These independent lines of evidence support a postchasma age for the ILD exposed within the study area. Chasma‐related normal faults may exist within these ILD at depth but are not exposed at the surface. Approximately 2 km of conformable stratigraphy is exposed in the study area, and therefore at least several kilometers of the local ILD were deposited subsequent to any chasma‐related normal faulting that may have occurred in this part of Candor Chasma.

Journal of Geophysical Research E: Planets↗

Ultrahigh resolution topographic mapping of Mars with MRO HiRISE stereo images: Meter-scale slopes of candidate Phoenix landing sites

The objectives of this paper are twofold: first, to report our estimates of the meter‐to‐decameter‐scale topography and slopes of candidate landing sites for the Phoenix mission, based on analysis of Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) images with a typical pixel scale of 3 m and Mars Reconnaissance Orbiter (MRO) High Resolution Imaging Science Experiment (HiRISE) images at 0.3 m pixel −1 and, second, to document in detail the geometric calibration, software, and procedures on which the photogrammetric analysis of HiRISE data is based. A combination of optical design modeling, laboratory observations, star images, and Mars images form the basis for software in the U.S. Geological Survey Integrated Software for Imagers and Spectrometers (ISIS) 3 system that corrects the images for a variety of distortions with single‐pixel or subpixel accuracy. Corrected images are analyzed in the commercial photogrammetric software SOCET SET (® BAE Systems), yielding digital topographic models (DTMs) with a grid spacing of 1 m (3–4 pixels) that require minimal interactive editing. Photoclinometry yields DTMs with single‐pixel grid spacing. Slopes from MOC and HiRISE are comparable throughout the latitude zone of interest and compare favorably with those where past missions have landed successfully; only the Mars Exploration Rover (MER) B site in Meridiani Planum is smoother. MOC results at multiple locations have root‐mean‐square (RMS) bidirectional slopes of 0.8–4.5° at baselines of 3–10 m. HiRISE stereopairs (one per final candidate site and one in the former site) yield 1.8–2.8° slopes at 1‐m baseline. Slopes at 1 m from photoclinometry are also in the range 2–3° after correction for image blur. Slopes exceeding the 16° Phoenix safety limit are extremely rare.

Journal of Geophysical Research E: Planets↗

Mars Exploration Program 2007 Phoenix landing site selection and characteristics

To ensure a successful touchdown and subsequent surface operations, the Mars Exploration Program 2007 Phoenix Lander must land within 65° to 72° north latitude, at an elevation less than −3.5 km. The landing site must have relatively low wind velocities and rock and slope distributions similar to or more benign than those found at the Viking Lander 2 site. Also, the site must have a soil cover of at least several centimeters over ice or icy soil to meet science objectives of evaluating the environmental and habitability implications of past and current near‐polar environments. The most challenging aspects of site selection were the extensive rock fields associated with crater rims and ejecta deposits and the centers of polygons associated with patterned ground. An extensive acquisition campaign of Odyssey Thermal Emission Imaging Spectrometer predawn thermal IR images, together with ∼0.31 m/pixel Mars Reconnaissance Orbiter High Resolution Imaging Science Experiment images was implemented to find regions with acceptable rock populations and to support Monte Carlo landing simulations. The chosen site is located at 68.16° north latitude, 233.35° east longitude (areocentric), within a ∼50 km wide (N‐S) by ∼300 km long (E‐W) valley of relatively rock‐free plains. Surfaces within the eastern portion of the valley are differentially eroded ejecta deposits from the relatively recent ∼10‐km‐wide Heimdall crater and have fewer rocks than plains on the western portion of the valley. All surfaces exhibit polygonal ground, which is associated with fracture of icy soils, and are predicted to have only several centimeters of poorly sorted basaltic sand and dust over icy soil deposits.

Journal of Geophysical Research E: Planets↗

High resolution imaging science experiment (HiRISE) images of volcanic terrains from the first 6 months of the Mars reconnaissance orbiter primary science phase

In the first 6 months of the Mars Reconnaissance Orbiter's Primary Science Phase, the High Resolution Imaging Science Experiment (HiRISE) camera has returned images sampling the diversity of volcanic terrains on Mars. While many of these features were noted in earlier imaging, they are now seen with unprecedented clarity. We find that some volcanic vents produced predominantly effusive products while others generated mostly pyroclastics. Flood lavas were emplaced in both turbulent and gentle eruptions, producing roofed channels and inflation features. However, many areas on Mars are too heavily mantled to allow meter-scale volcanic features to be discerned. In particular, the major volcanic edifices are extensively mantled, though it is possible that some of the mantle is pyroclastic material rather than atmospheric dust. Support imaging by the Context Imager (CTX) and topographic information derived from stereo imaging are both invaluable in interpreting the HiRISE data.

Journal of Geophysical Research E: Planets↗

HiRISE observations of fractured mounds: Possible Martian pingos

Early images from the High Resolution Imaging Science Experiment (HiRISE) camera have revealed small fractured mounds in the Martian mid‐latitudes. HiRISE resolves fractures on the mound surfaces, indicating uplift, and shows that the mound surface material resembles that of the surrounding landscape. Analysis of Mars Orbiter Camera (MOC) images shows that in Utopia Planitia the mounds lie almost exclusively between 35–45°N. This range coincides with the peak‐abundance latitudes of several landforms attributed to ground water or ice, including gullies, and suggests a ground ice‐related origin. The best terrestrial analogues for the observed mound morphology are pingos, although some differences are noted. The presence of uncollapsed pingos would indicate the presence of near‐surface ground ice in the Martian mid‐latitudes, at depths greater than the ∼1 meter sampled by orbital spectrometers. Pingo formation may require near‐surface liquid water, which is consistent with a shallow groundwater model for the origin of gullies.

Geophysical Research Letters↗

Quasi-periodic bedding in the sedimentary rock record of mars

Widespread sedimentary rocks on Mars preserve evidence of surface conditions different from the modern cold and dry environment, although it is unknown how long conditions favorable to deposition persisted. We used 1-meter stereo topographic maps to demonstrate the presence of rhythmic bedding at several outcrops in the Arabia Terra region. Repeating beds are ∼10 meters thick, and one site contains hundreds of meters of strata bundled into larger units at a ∼10:1 thickness ratio. This repetition likely points to cyclicity in environmental conditions, possibly as a result of astronomical forcing. If deposition were forced by orbital variation, the rocks may have been deposited over tens of millions of years.

Science↗

Recent bright gully deposits on Mars: Wet or dry flow?

Bright gully sediments attributed to liquid water flow have been deposited on Mars within the past several years. To test the liquid water flow hypothesis, we constructed a high-resolution (1 m/pixel) photogrammetric digital elevation model of a crater in the Centauri Montes region, where a bright gully deposit formed between 2001 and 2005. We conducted one-dimensional (1-D) and 2-D numerical flow modeling to test whether the deposit morphology is most consistent with liquid water or dry granular How. Liquid water flow models that incorporate freezing can match the runout distance of the flow for certain freezing rates but fail to reconstruct the distributary lobe morphology of the distal end of the deposit. Dry granular flow models can match both the observed runout distance and the distal morphology. Wet debris flows with high sediment concentrations are also consistent with the observed morphology because their rheologies are often similar to that of dry granular flows. As such, the presence of liquid water in this flow event cannot be ruled out, but the available evidence is consistent with dry landsliding.

Geology↗

Windy Mars: A dynamic planet as seen by the HiRISE camera

With a dynamic atmosphere and a large supply of particulate material, the surface of Mars is heavily influenced by wind-driven, or aeolian, processes. The High Resolution Imaging Science Experiment (HiRISE) camera on the Mars Reconnaissance Orbiter (MRO) provides a new view of Martian geology, with the ability to see decimeter-size features. Current sand movement, and evidence for recent bedform development, is observed. Dunes and ripples generally exhibit complex surfaces down to the limits of resolution. Yardangs have diverse textures, with some being massive at HiRISE scale, others having horizontal and cross-cutting layers of variable character, and some exhibiting blocky and polygonal morphologies. "Reticulate" (fine polygonal texture) bedforms are ubiquitus in the thick mantle at the highest elevations.

Geophysical Research Letters↗

Mars reconnaissance orbiter's high resolution imaging science experiment (HiRISE)

The HiRISE camera features a 0.5 m diameter primary mirror, 12 m effective focal length, and a focal plane system that can acquire images containing up to 28 Gb (gigabits) of data in as little as 6 seconds. HiRISE will provide detailed images (0.25 to 1.3 m/pixel) covering ∼1% of the Martian surface during the 2‐year Primary Science Phase (PSP) beginning November 2006. Most images will include color data covering 20% of the potential field of view. A top priority is to acquire ∼1000 stereo pairs and apply precision geometric corrections to enable topographic measurements to better than 25 cm vertical precision. We expect to return more than 12 Tb of HiRISE data during the 2‐year PSP, and use pixel binning, conversion from 14 to 8 bit values, and a lossless compression system to increase coverage. HiRISE images are acquired via 14 CCD detectors, each with 2 output channels, and with multiple choices for pixel binning and number of Time Delay and Integration lines. HiRISE will support Mars exploration by locating and characterizing past, present, and future landing sites, unsuccessful landing sites, and past and potentially future rover traverses. We will investigate cratering, volcanism, tectonism, hydrology, sedimentary processes, stratigraphy, aeolian processes, mass wasting, landscape evolution, seasonal processes, climate change, spectrophotometry, glacial and periglacial processes, polar geology, and regolith properties. An Internet Web site (HiWeb) will enable anyone in the world to suggest HiRISE targets on Mars and to easily locate, view, and download HiRISE data products.

Journal of Geophysical Research E: Planets↗

Comparison of flood lavas on Earth and Mars

Flood lavas, by definition, cover vast areas in great sheets of lava, without the construction of major edifices (e.g., Geikie, 1880; Washington, 1922; Tyrrell, 1937; Self et al ., 1997). The flat terrain that flood lavas produce has led to the term “plateau volcanism” to be used as a synonym for flood volcanism. In addition, the classic erosion pattern of flood lavas leaves a series of topographic steps. Thus many flood basalt provinces are known as “traps” from the Scandinavian word for steps. Plateau volcanism transitions to “plains” volcanism when low shields become common (Greeley and King, 1977). It is not surprising that these large-volume eruptions are usually composed of the most common of volcanic rocks: basalt. Thus, the term “flood basalt” is often used interchangeably with “flood volcanism.” However, there can be interesting and significant compositional variability within flood “basalt” provinces. The most general term to describe all large-volume volcanism is “Large Igneous Province” (LIP) (e.g., Coffin and Eldholm, 1994). LIPs represent a major geologic event with significant repercussions on the interior of a planetary body. The extraction of such large volumes of magma can alter the thermal state of the mantle, indicate major changes in the convection patterns within the mantle, and lead to geochemical evolution of the mantle on a regional scale (e.g., Coffin and Eldholm, 1994 and references therein). Flood lavas also alter the face of a planet for geologically significant time.

Book chapter↗

Athabasca Valles, Mars: A lava-draped channel system

Athabasca Valles is a young outflow channel system on Mars that may have been carved by catastrophic water floods. However, images acquired by the High-Resolution Imaging Science Experiment camera onboard the Mars Reconnaissance Orbiter spacecraft reveal that Athabasca Valles is now entirely draped by a thin layer of solidified lava - the remnant of a once-swollen river of molten rock. The lava erupted from a fissure, inundated the channels, and drained downstream in geologically recent times. Purported ice features in Athabasca Valles and its distal basin, Cerberus Palus, are actually composed of this lava. Similar volcanic processes may have operated in other ostensibly fluvial channels, which could explain in part why the landers sent to investigate sites of ancient flooding on Mars have predominantly found lava at the surface instead.

Science↗

A closer look at water-related geologic activity on Mars

Water has supposedly marked the surface of Mars and produced characteristic landforms. To understand the history of water on Mars, we take a close look at key locations with the High-Resolution Imaging Science Experiment on board the Mars Reconnaissance Orbiter, reaching fine spatial scales of 25 to 32 centimeters per pixel. Boulders ranging up to ∼2 meters in diameter are ubiquitous in the middle to high latitudes, which include deposits previously interpreted as finegrained ocean sediments or dusty snow. Bright gully deposits identify six locations with very recent activity, but these lie on steep (20° to 35°) slopes where dry mass wasting could occur. Thus, we cannot confirm the reality of ancient oceans or water in active gullies but do see evidence of fluvial modification of geologically recent mid-latitude gullies and equatorial impact craters.

Science↗

Ultrahigh resolution topographic mapping of Mars with HiRISE stereo images: Methods and first results

The Mars Reconnaissance Orbiter (MRO) arrived at Mars on 10 March 2006 and began its primary science phase in November. The High Resolution Imaging Science Experiment (HiRISE) on MRO is the largest, most complex camera ever flown to another planet. Plans call for this scanner to image roughly 1% of Mars by area at a pixel scale of 0.3 m during the next Mars year. Among the thousands of images will be hundreds of stereopairs that will provide an unprecedented three-dimensional view of the Martian surface at meter scale. These stereopairs will provide a tremendous amount of information for focused scientific studies, landing site selection and validation, and the operation of landers and rovers. In this paper, we describe our approach to generating geodetically controlled digital topographic models (DTMs) from such stereopairs, our early results, and plans for future DTM production. Our approach to the photogrammetric processing of HiRISE images follows that which we have previously described for the MOC and the Mars Express High Resolution Stereo Camera (HRSC). We use the USGS in-house digital cartographic software ISIS to do initial processing, including ingestion, decompression, and radiometric calibration of the images. "Three-dimensional" photogrammetric processing steps, including control and DTM creation and editing, are performed on a photogrammetric workstation running the commercial software SOCET SET (® BAE Systems). Noteworthy departures from past practice are the use of ISIS 3, the object-oriented successor to the older ISIS 2 system, and pre-processing in ISIS to correct geometric complications of the HiRISE images that cannot be modelled in the SOCET sensor model: multiple CCD detectors in the focal plane, optical distortion around an axis far from the detectors, and (ultimately) the small "jitter" motions of spacecraft pointing that distort the images and hence the DTMs. The first HiRISE stereopair analyzed covered the location of the Opportunity rover near the 750-m crater informally named Victoria in Meridiani Planum. This scene was extremely unfavorable for automated stereomatching, with extensive areas that are almost featureless, extremely steep, or both, but these problems were offset by the high quality of the HiRISE imagery, permitting us to obtain a 1 m/post DTM that required only limited interactive editing. Subsequent mapping of the Spirit rover site and a variety of scientifically interesting sites has proven that the greater surface texture found at most places on Mars leads to even better DTMs with even less editing required. We are currently working to refine and streamline our procedures in order to maximize the number of sites that can be mapped and studied in three dimensions with HiRISE.

Conference Paper↗

The rayed crater Zunil and interpretations of small impact craters on Mars

A 10-km diameter crater named Zunil in the Cerberus Plains of Mars created ∼ 10 7 "> ∼107 secondary craters 10 to 200 m in diameter. Many of these secondary craters are concentrated in radial streaks that extend up to 1600 km from the primary crater, identical to lunar rays. Most of the larger Zunil secondaries are distinctive in both visible and thermal infrared imaging. MOC images of the secondary craters show sharp rims and bright ejecta and rays, but the craters are shallow and often noncircular, as expected for relatively low-velocity impacts. About 80% of the impact craters superimposed over the youngest surfaces in the Cerberus Plains, such as Athabasca Valles, have the distinctive characteristics of Zunil secondaries. We have not identified any other large (⩾10 km diameter) impact crater on Mars with such distinctive rays of young secondary craters, so the age of the crater may be less than a few Ma. Zunil formed in the apparently youngest (least cratered) large-scale lava plains on Mars, and may be an excellent example of how spallation of a competent surface layer can produce high-velocity ejecta (Melosh, 1984, Impact ejection, spallation, and the origin of meteorites, Icarus 59, 234–260). It could be the source crater for some of the basaltic shergottites, consistent with their crystallization and ejection ages, composition, and the fact that Zunil produced abundant high-velocity ejecta fragments. A 3D hydrodynamic simulation of the impact event produced 10 10 rock fragments ⩾10 cm diameter, leading to up to 10 9 secondary craters ⩾10 m diameter. Nearly all of the simulated secondary craters larger than 50 m are within 800 km of the impact site but the more abundant smaller (10–50 m) craters extend out to 3500 km. If Zunil is representative of large impact events on Mars, then secondaries should be more abundant than primaries at diameters a factor of ∼1000 smaller than that of the largest primary crater that contributed secondaries. As a result, most small craters on Mars could be secondaries. Depth/diameter ratios of 1300 small craters (10–500 m diameter) in Isidis Planitia and Gusev crater have a mean value of 0.08; the freshest of these craters give a ratio of 0.11, identical to that of fresh secondary craters on the Moon (Pike and Wilhelms, 1978, Secondary-impact craters on the Moon: topographic form and geologic process, Lunar Planet. Sci. IX, 907–909) and significantly less than the value of ∼0.2 or more expected for fresh primary craters of this size range. Several observations suggest that the production functions of Hartmann and Neukum (2001, Cratering chronology and the evolution of Mars, Space Sci. Rev. 96, 165–194) predict too many primary craters smaller than a few hundred meters in diameter. Fewer small, high-velocity impacts may explain why there appears to be little impact regolith over Amazonian terrains. Martian terrains dated by small craters could be older than reported in recent publications.

Icarus↗

Volcanic activity at Tvashtar Catena, Io

Galileo 's Solid State Imager (SSI) observed Tvashtar Catena four times between November 1999 and October 2001, providing a unique look at a distinctive high latitude volcanic complex on Io. The first observation (orbit I25, November 1999) resolved, for the first time, an active extraterrestrial fissure eruption; the brightness temperature was at least 1300 K. The second observation (orbit I27, February 2000) showed a large ( ∼ 500 km 2 "> ∼500km2 ) region with many, small, hot, regions of active lava. The third observation was taken in conjunction with Cassini imaging in December 2000 and showed a Pele-like, annular plume deposit. The Cassini images revealed an ∼ 400 km "> ∼400km high Pele-type plume above Tvashtar Catena. The final Galileo SSI observation of Tvashtar (orbit I32, October 2001), revealed that obvious (to SSI) activity had ceased, although data from Galileo 's Near Infrared Mapping Spectrometer(NIMS) indicated that there was still significant thermal emission from the Tvashtar region. In this paper, we primarily analyze the style of eruption during orbit I27 (February 2000). Comparison with a lava flow cooling model indicates that the behavior of the Tvashtar eruption during I27 does not match that of simple advancing lava flows. Instead, it may be an active lava lake or a complex set of lava flows with episodic, overlapping eruptions. The highest reliable color temperature is ∼ 1300 K "> ∼1300K . Although higher temperatures cannot be ruled out, they do not need to be invoked to fit the observed data. The total power output from the active lavas in February 2000 was at least 10 11 W "> 1011W .

Icarus↗

The final Galileo SSI observations of Io: Orbits G28-I33

We present the observations of Io acquired by the Solid State Imaging (SSI) experiment during the Galileo Millennium Mission (GMM) and the strategy we used to plan the exploration of Io. Despite Galileo's tight restrictions on data volume and downlink capability and several spacecraft and camera anomalies due to the intense radiation close to Jupiter, there were many successful SSI observations during GMM. Four giant, high-latitude plumes, including the largest plume ever observed on Io, were documented over a period of eight months; only faint evidence of such plumes had been seen since the Voyager 2 encounter, despite monitoring by Galileo during the previous five years. Moreover, the source of one of the plumes was Tvashtar Catena, demonstrating that a single site can exhibit remarkably diverse eruption styles—from a curtain of lava fountains, to extensive surface flows, and finally a ∼400 km high plume—over a relatively short period of time (∼13 months between orbits I25 and G29). Despite this substantial activity, no evidence of any truly new volcanic center was seen during the six years of Galileo observations. The recent observations also revealed details of mass wasting processes acting on Io. Slumping and landsliding dominate and occur in close proximity to each other, demonstrating spatial variation in material properties over distances of several kilometers. However, despite the ubiquitous evidence for mass wasting, the rate of volcanic resurfacing seems to dominate; the floors of paterae in proximity to mountains are generally free of debris. Finally, the highest resolution observations obtained during Galileo's final encounters with Io provided further evidence for a wide diversity of surface processes at work on Io.

Icarus↗