Search USGS⌕ Search

Geology topics

A. J. Crone

Publications and source records attributed to A. J. Crone.

At least 19 recordsLinked to original sources
USGS2011

Integration of paleoseismic data from multiple sites to develop an objective earthquake chronology: Application to the Weber segment of the Wasatch fault zone, Utah

We present a method to evaluate and integrate paleoseismic data from multiple sites into a single, objective measure of earthquake timing and recurrence on discrete segments of active faults. We apply this method to the Weber segment (WS) of the Wasatch fault zone using data from four fault-trench studies completed between 1981 and 2009. After systematically reevaluating the stratigraphic and chronologic data from each trench site, we constructed time-stratigraphic OxCal models that yield site probability density functions (PDFs) of the times of individual earthquakes. We next qualitatively correlated the site PDFs into a segment-wide earthquake chronology, which is supported by overlapping site PDFs, large per-event displacements, and prominent segment boundaries. For each segment-wide earthquake, we computed the product of the site PDF probabilities in common time bins, which emphasizes the overlap in the site earthquake times, and gives more weight to the narrowest, best-defined PDFs. The product method yields smaller earthquake-timing uncertainties compared to taking the mean of the site PDFs, but is best suited to earthquakes constrained by broad, overlapping site PDFs. We calculated segment-wide earthquake recurrence intervals and uncertainties using a Monte Carlo model. Five surface-faulting earthquakes occurred on the WS at about 5.9, 4.5, 3.1, 1.1, and 0.6 ka. With the exception of the 1.1-ka event, we used the product method to define the earthquake times. The revised WS chronology yields a mean recurrence interval of 1.3 kyr (0.7–1.9-kyr estimated two-sigma [2δ] range based on interevent recurrence). These data help clarify the paleoearthquake history of the WS, including the important question of the timing and rupture extent of the most recent earthquake, and are essential to the improvement of earthquake-probability assessments for the Wasatch Front region.

Utah↗
USGS2010

Complex rupture during the 12 January 2010 Haiti earthquake

Initially, the devastating Mw 7.0, 12 January 2010 Haiti earthquake seemed to involve straightforward accommodation of oblique relative motion between the Caribbean and North American plates along the Enriquillog-Plantain Garden fault zone. Here, we combine seismological observations, geologic field data and space geodetic measurements to show that, instead, the rupture process may have involved slip on multiple faults. Primary surface deformation was driven by rupture on blind thrust faults with only minor, deep, lateral slip along or near the main Enriquillog-Plantain Garden fault zone; thus the event only partially relieved centuries of accumulated left-lateral strain on a small part of the plate-boundary system. Together with the predominance of shallow off-fault thrusting, the lack of surface deformation implies that remaining shallow shear strain will be released in future surface-rupturing earthquakes on the Enriquillog-Plantain Garden fault zone, as occurred in inferred Holocene and probable historic events. We suggest that the geological signature of this earthquakeg-broad warping and coastal deformation rather than surface rupture along the main fault zoneg-will not be easily recognized by standard palaeoseismic studies. We conclude that similarly complex earthquakes in tectonic environments that accommodate both translation and convergenceg-such as the San Andreas fault through the Transverse Ranges of Californiag-may be missing from the prehistoric earthquake record. ?? 2010 Macmillan Publishers Limited. All rights reserved.

Nature Geoscience↗
USGS2007

Map and Database of Probable and Possible Quaternary Faults in Afghanistan

The U.S. Geological Survey (USGS) with support from the U.S. Agency for International Development (USAID) mission in Afghanistan, has prepared a digital map showing the distribution of probable and suspected Quaternary faults in Afghanistan. This map is a key component of a broader effort to assess and map the country's seismic hazards. Our analyses of remote-sensing imagery reveal a complex array of tectonic features that we interpret to be probable and possible active faults within the country and in the surrounding border region. In our compilation, we have mapped previously recognized active faults in greater detail, and have categorized individual features based on their geomorphic expression. We assigned mapped features to eight newly defined domains, each of which contains features that appear to have similar styles of deformation. The styles of deformation associated with each domain provide insight into the kinematics of the modern tectonism, and define a tectonic framework that helps constrain deformational models of the Alpine-Himalayan orogenic belt. The modern fault movements, deformation, and earthquakes in Afghanistan are driven by the collision between the northward-moving Indian subcontinent and Eurasia. The patterns of probable and possible Quaternary faults generally show that much of the modern tectonic activity is related to transfer of plate-boundary deformation across the country. The left-lateral, strike-slip Chaman fault in southeastern Afghanistan probably has the highest slip rate of any fault in the country; to the north, this slip is distributed onto several fault systems. At the southern margin of the Kabul block, the style of faulting changes from mainly strike-slip motion associated with the boundary between the Indian and Eurasian plates, to transpressional and transtensional faulting. North and northeast of the Kabul block, we recognized a complex pattern of potentially active strike-slip, thrust, and normal faults that form a conjugate shear system in a transpressional region of the Trans-Himalayan orogenic belt. The general patterns and orientations of faults and the styles of deformation that we interpret from the imagery are consistent with the styles of faulting determined from focal mechanisms of historical earthquakes. Northwest-trending strike-slip fault zones are cut and displaced by younger, southeast-verging thrust faults; these relations define the interaction between northwest-southeast-oriented contraction and northwest-directed extrusion in the western Himalaya, Pamir, and Hindu Kush regions. Transpression extends into north-central Afghanistan where north-verging contraction along the east-west-trending Alburz-Marmul fault system interacts with northwest-trending strike-slip faults. Pressure ridges related to thrust faulting and extensional basins bounded by normal faults are located at major stepovers in these northwest-trending strike-slip systems. In contrast, young faulting in central and western Afghanistan indicates that the deformation is dominated by extension where strike-slip fault zones transition into regions of normal faults. In addition to these initial observations, our digital map and database provide a foundation that can be expanded, complemented, and modified as future investigations provide more detailed information about the location, characteristics, and history of movement on Quaternary faults in Afghanistan.

Open-File Report↗
USGS2004

The Susitna Glacier thrust fault: Characteristics of surface ruptures on the fault that initiated the 2002 Denali fault earthquake

The 3 November 2002 M w 7.9 Denali fault earthquake sequence initiated on the newly discovered Susitna Glacier thrust fault and caused 48 km of surface rupture. Rupture of the Susitna Glacier fault generated scarps on ice of the Susitna and West Fork glaciers and on tundra and surficial deposits along the southern front of the central Alaska Range. Based on detailed mapping, 27 topographic profiles, and field observations, we document the characteristics and slip distribution of the 2002 ruptures and describe evidence of pre-2002 ruptures on the fault. The 2002 surface faulting produced structures that range from simple folds on a single trace to complex thrust-fault ruptures and pressure ridges on multiple, sinuous strands. The deformation zone is locally more than 1 km wide. We measured a maximum vertical displacement of 5.4 m on the south-directed main thrust. North-directed backthrusts have more than 4 m of surface offset. We measured a well-constrained near-surface fault dip of about 19° at one site, which is considerably less than seismologically determined values of 35°–48°. Surface-rupture data yield an estimated magnitude of M w 7.3 for the fault, which is similar to the seismological value of M w 7.2. Comparison of field and seismological data suggest that the Susitna Glacier fault is part of a large positive flower structure associated with northwest-directed transpressive deformation on the Denali fault. Prehistoric scarps are evidence of previous rupture of the Sustina Glacier fault, but additional work is needed to determine if past failures of the Susitna Glacier fault have consistently induced rupture of the Denali fault.

Alaska↗
USGS2003

The 2002 Denali fault earthquake, Alaska: A large magnitude, slip-partitioned event

The MW (moment magnitude) 7.9 Denali fault earthquake on 3 November 2002 was associated with 340 kilometers of surface rupture and was the largest strike-slip earthquake in North America in almost 150 years. It illuminates earthquake mechanics and hazards of large strike-slip faults. It began with thrusting on the previously unrecognized Susitna Glacier fault, continued with right-slip on the Denali fault, then took a right step and continued with right-slip on the Totschunda fault. There is good correlation between geologically observed and geophysically inferred moment release. The earthquake produced unusually strong distal effects in the rupture propagation direction, including triggered seismicity.

Science↗
USGS2003

Paleoseismicity of two historically quiescent faults in Australia: Implications for fault behavior in stable continental regions

Paleoseismic studies of two historically aseismic Quaternary faults in Australia confirm that cratonic faults in stable continental regions (SCR) typically have a long-term behavior characterized by episodes of activity separated by quiescent intervals of at least 10,000 and commonly 100,000 years or more. Studies of the approximately 30-km-long Roopena fault in South Australia and the approximately 30-km-long Hyden fault in Western Australia document multiple Quaternary surface-faulting events that are unevenly spaced in time. The episodic clustering of events on cratonic SCR faults may be related to temporal fluctuations of fault-zone fluid pore pressures in a volume of strained crust. The long-term slip rate on cratonic SCR faults is extremely low, so the geomorphic expression of many cratonic SCR faults is subtle, and scarps may be difficult to detect because they are poorly preserved. Both the Roopena and Hyden faults are in areas of limited or no significant seismicity; these and other faults that we have studied indicate that many potentially hazardous SCR faults cannot be recognized solely on the basis of instrumental data or historical earthquakes. Although cratonic SCR faults may appear to be nonhazardous because they have been historically aseismic, those that are favorably oriented for movement in the current stress field can and have produced unexpected damaging earthquakes. Paleoseismic studies of modern and prehistoric SCR faulting events provide the basis for understanding of the long-term behavior of these faults and ultimately contribute to better seismic-hazard assessments.

South Australia↗
USGS2001

Known and suggested quaternary faulting in the midcontinent United States

The midcontinent United States between the Appalachian and Rocky Mountains contains 40 known faults or other potentially tectonic features for which published geologic information shows or suggests Quaternary tectonic faulting. We report results of a systematic evaluation of published and other publicly available geologic evidence of Quaternary faulting. These results benefit seismic-hazard assessments by (1) providing some constraints on the recurrence intervals and magnitudes of large, prehistoric earthquakes, and (2) identifying features that warrant additional study. For some features, suggested Quaternary tectonic faulting has been disproved, whereas, for others, the suggested faulting remains questionable. Of the 40 features, nine have clear geologic evidence of Quaternary tectonic faulting associated with prehistoric earthquakes, and another six features have evidence of nontectonic origins. An additional 12 faults, uplifts, or historical seismic zones lack reported paleoseismological evidence of large. Quaternary earthquakes. The remaining 13 features require further paleoseismological study to determine if they have had Quaternary earthquakes that were larger than any known from local historical records; seven of these 13 features are in or near urbanized areas where their study could affect urban hazard estimates. These seven are: (1) the belt of normal faults that rings the Gulf of Mexico from Florida to Texas. (2) the Northeast Ohio seismic zone, (3) the Valmont and (4) Goodpasture faults of Colorado. (5) the Champlain lowlands normal faults of New York State and Vermont, and (6) the Lexington and (7) Kentucky River fault systems of eastern Kentucky. Published by Elsevier Science B.V.

Engineering Geology↗
USGS2000

Earthquakes in and near the northeastern United States, 1638-1998

The data are those used to make a large-format, colored map of earthquakes in the northeastern United States and adjacent parts of Canada and the Atlantic Ocean (Wheeler, 2000; Wheeler and others, 2001; references in Data_Quality_Information, Lineage). The map shows the locations of 1,069 known earthquakes of magnitude 3.0 or larger, and is designed for a non-technical audience. Colored circles represent earthquake locations, colored and sized by magnitude. Short descriptions, colonial-era woodcuts, newspaper headlines, and photographs summarize the dates, times of day, damage, and other effects of notable earthquakes. The base map shows color-coded elevation, shaded to emphasize relief.

IMAP↗
USGS1997

Episodic nature of earthquake activity in stable continental regions revealed by palaeoseismicity studies of Australian and North American Quaternary faults

Palaeoseismic investigations of recent faulting in stable continental regions of Australia, North America and India show that these faults typically have a long-term behaviour characterised by episodes of activity separated by quiescent intervals of at least 10 000 and commonly 100 000 years or more. Long recurrence intervals such as these are well documented by detailed studies of the faults that ruptured during the 1986 Marryat Creek, South Australia and 1988 Tennant Creek, Northern Territory earthquakes. Thus, neotectonic features associated with stable continental region faults such as scarps and grabens commonly have subtle geomorphic expression and may be poorly preserved. Many potentially hazardous faults in stable continental regions are aseismic, which is one reason why the inventory of these faults is incomplete. Although they may be currently aseismic, faults in stable continental regions that are favourably oriented for movement in the current stress field could produce damaging earthquakes, often in unexpected places. Comprehensive palaeoseismic investigations of modern and prehistoric faulting events in stable continental regions are needed to understand the long-term behaviour of these faults, and thereby, improve seismic-hazard assessments.

Australian Journal of Earth Sciences↗
USGS1994

Thermoluminescence dating of Australian palaeo-earthquakes

Thermoluminescence (TL) dating is a useful tool for determining the age of prehistoric earthquakes by dating deposits that are stratigraphically related to fault scarps that formed during the earthquakes. TL dating of aeolian sand in the area of the 1988 Tennant Creek, Northern Territory, earthquakes provides evidence that similar earthquakes have not ruptured the causative faults for at least 50 ka. Pilot TL measurements of deposits associated with the Roopena and Ash Ridge fault scarps near Whyalla on Eyre Peninsula, South Australia, suggest an age of 140 ka for the Quaternary deposits associated with the formation of the scarps.

Eyre Peninsula↗