Search USGS⌕ Search

Geology topics

A. H. Hofstra

Publications and source records attributed to A. H. Hofstra.

27 records · Page 2Linked to original sources
USGS1996

The composition of fluid inclusions in ore and gangue minerals from the Silesian-Cracow Mississippi Valley-type Zn-Pb deposits Poland: Genetic and environmental implications

The composition of fluids extracted from ore and gangue sulfide minerals that span most of the paragenesis of the Silesian-Cracow district was determined using a newly developed ion chromatographic (IC) technique. Ionic species determined were Na+, NH+4, Ca2+, Mg2+, K+, Rb+, Sr2+, Ba2+, Cl-, Br-, F-, I-, PO3-4, CO2-3, HS-, S2O2-3, SO2-4, NO-3, and acetate. Mineral samples included six from the Pomorzany mine and one from the Trzebionka mine which are hosted in the Triassic Muschelkalk Formation, and two samples of drill core from mineralized Upper Devonian strata. Nine paragenetically identifiable sulfide minerals occur throughout the Silesian-Cracow district. These include from earliest to latest: early iron sulfides, granular sphalerite, early galena, light-banded sphalerite, galena, dark-banded sphalerite, iron sulfides, late dark-banded sphalerite with late galena, and late iron sulfides. Seven of the minerals were sampled for fluid inclusion analysis in this study. Only the early iron sulfides and the last galena stage were not sampled. Although the number of analyses are limited to nine samples and two replicates and there is uncertainty about the characteristics of the fluid inclusions analyzed, the data show clear temporal trends in the composition of the fluids that deposited these minerals. Fluid inclusions in minerals deposited later in the paragenesis have significantly more K+, Br-, NH+4, and acetate but less Sr2+ than those deposited earlier in the paragenesis. The later minerals are also characterized by isotopically lighter sulfur and significantly more Tl and As in the solid minerals. The change in ore-fluid chemistry is interpreted to reflect a major change in the hydrologic regime of the district. Apparently, the migrational paths of ore fluids from the Upper Silesian basin changed during ore deposition and the fluids which deposited early minerals reacted with aquifers with very different geochemical characteristics than those that deposited late minerals. The early fluids may have reacted primarily with Devonian and Lower Carboniferous carbonate aquifers deeper in the basin, whereas the later fluids appear to have had extensive contact with organic-rich rocks, probably the shallower Middle and Upper Carboniferous flysch associated with coal measures. High concentrations of toxic Tl and As occur in the readily oxidized marcasite and pyrite minerals deposited by the later fluids. In general, the geochemistry of both the early and late fluids may be explained by an evaporite related origin or by water-rock modification of a saline basinal brine. When compared to the composition of fluid inclusions in Mississippi Valley-type (MVT) ore minerals from the Ozark region of the United States, fluid inclusions in minerals from Silesian-Cracow are fundamentally different, containing more Ca2+, Mg2+, NH+4, Br-, Sr2+ and acetate in all mineral stages with significantly more K+ in later stage minerals. The differences in ore fluid chemistry between the two regions are consistent with the lithologic differences of the respective basins thought to be the source of the mineralizing brines.

Prace - Panstwowego Instytutu Geologicznego↗
USGS1994

Chemical reaction path modeling of ore deposition in Mississippi Valley-type Pb-Zn deposits of the Ozark region, US midcontinent

The Ozark region of the U.S. midcontinent is host to a number of Mississippi Valley-type districts, including the world-class Viburnum Trend, Old Lead Belt, and Tri-State districts and the smaller Southeast Missouri barite, Northern Arkansas, and Central Missouri districts. There is increasing evidence that the Ozark Mississippi Valley-type districts formed locally within a large, interconnected hydrothermal system that also produced broad fringing areas of trace mineralization, extensive subtle hydrothermal alteration, broad thermal anomalies, and regional deposition of hydrothermal dolomite cement. The fluid drive was provided by gravity flow accompanying uplift of foreland thrust belts during the Late Pennsylvanian to Early Permian Ouaehita orogeny.In this study, we use chemical speciation and reaction path calculations, based on quantitative chemical analyses of fluid inclusions, to constrain likely hydrothermal brine compositions and to determine which precipitation mechanisms are consistent with the hydrothermal mineral assemblages observed regionally and locally within each Mississippi Valley-type district in the Ozark region. Deposition of the regional hydrothermal dolomite cement with trace sulfides likely occurred in response to near-isothermal effervescence of CO 2 from basinal brines as they migrated to shallower crustal levels and lower confining pressures. In contrast, our calculations indicate that no one depositional process can reproduce the mineral assemblages and proportions of minerals observed in each Ozark ore district; rather, individual districts require specific depositional mechanisms that reflect the local host-rock composition, structural setting, and hydrology.Both the Northern Arkansas and Tri-State districts are localized by normal faults that likely allowed brines to rise from deeper Cambrian-Ordovician dolostone aquifers into shallower carbonate sequences dominated by limestones. In the Northern Arkansas district, jasperoid preferentially replaced limestones in the mixed dolostone-limestone sedimentary packages. Modeling results indicate that the ore and alteration assemblages in the Tri-State and Northern Arkansas districts resulted from the flow of initially dolomite-saturated brines into cooler limestones. Adjacent to fluid conduits where water/rock ratios were the highest, the limestone was replaced by dolomite. As the fluids moved outward into cooler limestone, jasperoid and sulfide replaced limestone. Isothermal boiling of the ore fluids may have produced open-space filling of hydrothermal dolomite with minor sulfides in breccia and fault zones. Local mixing of the regional brine with locally derived sulfur undoubtedly played a role in the development of sulfide-rich ore runs.Sulfide ores of the Central Missouri district are largely open-space filling of sphalerite plus minor galena in dolostone karst features localized along a broad anticline. Hydrothermal solution collapse during ore deposition was a minor process, indicating dolomite was slightly undersaturated during ore deposition. No silicification and only minor hydrothermal dolomite is present in the ore deposits. The reaction path that best explains the features of the Central Missouri sulfide deposits is the near-isothermal mixing of two dolomite-saturated fluids with different H 2 S and metal contents. Paleokarst features may have allowed the regional brine to rise stratigraphically and mix with locally derived, H 2 S-rich fluids. The Viburnum Trend and Old Lead Belt ores are galena rich with lesser amounts of sphalerite; they replace the most permeable dolostone facies in the Bonneterre Dolomite. Hydrothermal dissolution of host dolostone was concurrent with sulfide deposition, but dolomite deposition occurred episodically between periods of sulfide deposition. The important ore controls in these districts are a variety of sedimentary and geologic features that allowed cross-stratigraphic fluid flow and provided opportunities for fluid mixing. The reaction path which best reproduces the broad features of the Viburnum Trend and Old Lead Belt ores is one in which a dolomite-saturated, lead-rich, zinc- and H 2 S-poor brine mixes with a less saline, H 2 S-rich fluid. The brine became enriched in K, Mg, and Pb and depleted in H 2 S as it flowed through sandstone and redbed aquifers prior to entering the district. This mixing model is consistent with the abundant fluid inclusion and stable isotope evidence for fluid mixing in the districts. Small amounts of cooling associated with the mixing may have contributed to sulfide deposition.

Alabama, Arkansas, Illinois, Indiana, Kansas, Kent↗
USGS1991

Fluid inclusion gas chemistry as a potential minerals exploration tool: Case studies from Creede, CO, Jerritt Canyon, NV, Coeur d'Alene district, ID and MT, southern Alaska mesothermal veins, and mid-continent MVT's

Recent advances in instrumentation now permit quantitative analysis of gas species from individual fluid inclusions. Fluid inclusion gas data can be applied to minerals exploration empirically to establish chemical (gas composition) signatures of the ore fluids, and conceptually through the development of genetic models of ore formation from a framework of integrated geologic, geochemical, and isotopic investigations. Case studies of fluid inclusion gas chemistry from ore deposits representing a spectrum of ore-forming processes and environments are presented to illustrate both the empirical and conceptual approaches. We consider epithermal silver-gold deposits of Creede, Colorado, Carlin-type sediment-hosted disseminated gold deposits of Jerritt Canyon, Nevada, metamorphic silver-base-metal veins of the Coeur d'Alene district, Idaho and Montana, gold-quartz veins in accreted terranes of southern Alaska, and the mid-continent base-metal sulfide deposits of Mississippi Valley-Type (MVT's). Variations in gas chemistry determine the redox state of the ore fluids, provide compositional input for gas geothermometers, characterize ore fluid chemistry (e.g., CH 4 CO 2 , H 2 SSO 2 , CO 2 /H 2 S, organic-rich fluids, gas-rich and gas-poor fluids), identify magmatic, meteoric, metamorphic, shallow and deep basin fluids in ore systems, locate upwelling plumes of magmatic-derived volatiles, zones of boiling and volatile separation, interfaces between contrasting fluids, and important zones of fluid mixing. Present techniques are immediately applicable to exploration programsas empirical studies that monitor fluid inclusion gas threshold concentration levels, presence or absence of certain gases, or changes in gas ratios. We suggest that the greater contribution of fluid inclusion gas analysis is in the integrated and comprehensive chemical dimension that gas data impart to genetic models, and in the exploration concepts based on processes and environments of ore formation derived from these genetic models.

Journal of Geochemical Exploration↗
USGS1991

Genesis of sediment-hosted disseminated-gold deposits by fluid mixing and sulfidization: chemical-reaction-path modeling of ore- depositional processes documented in the Jerritt Canyon district, Nevada

Integrated geologic, geochemical, fluid-inclusion, and stableisotope studies of the gold deposits in the Jerritt Canyon district, Nevada, provide evidence that gold deposition was a consequence of both fluid mixing and sulfidization of host-rock iron. Chemical-reaction-path models of these ore-depositional processes confirm that the combination of fluid mixing, including simultaneous cooling, dilution, and oxidation of the ore fluid, and wall-rock reaction, with sulfidization of reactive iron in the host rock, explains the disseminated nature and small size of the gold and the alteration zonation, mineralogy, and geochemistry observed at Jerritt Canyon and at many other sediment-hosted disseminated gold deposits.

Geology↗
USGS1991

Origin of late dolomite cement by CO2-saturated deep basin brines: evidence from the Ozark region, central United States

Studies of fluid inclusions in regionally extensive late dolomite cement (LDC) throughout the Ozark region show that CO 2 effervescence was widespread during dolomite precipitation. On the basis of quantitative analyses of inclusion fluids, reaction-path modeling shows that LDC with trace amounts of sulfides can be deposited by effervescence of a CO 2 -saturated basin brine as it migrates to shallower levels and lower confining pressures. This precipitation mechanism best explains occurrences of LDC in the Ozark region and may account for LDC found in sedimentary basins worldwide.

Geology↗